Products

Steel Zinc Plated Kinmar® Permanent Sleeve Anchor Expanding fixings giving fast and easy application for heavy duty security. Security Anchors save time and money when fixing applications that require a firm hold. They are suitable for fixing to a wide range of base materials such as brick, concrete, stone and masonry. Available in both permanent and removable options... for a hold that stays. Driver Size: KM8P (Please note these anchors are not intended for heavy duty structural applications).  

Read more less

Kinmar® Removable BZP Sleeve Anchor Expanding fixings giving fast and easy application for heavy duty security. Security Anchors save time and money when fixing applications that require a firm hold. They are suitable for fixing to a wide range of base materials such as brick, concrete, stone and masonry. Available in both permanent and removable options... for a hold that stays. Driver Size: KM8R (Please note these anchors are not intended for heavy duty structural applications).  

Read more less

Marks a fixing point through fittings or fixtures at depths up to 100mm. A unique patented tool designed so that one push quickly, easily and marks almost any surface. Push the Marxman pen into the fixture hole, and a burst of bright green chalk will mark the surface with the required drill hole point. • Bright green visible marker• Approx. 250 bursts• Fixture marking over 50mm up to a depth of 100mm• Easy to remove• UK designed & manufactured• As seen on TV from BBC's Dragon's Den

Read more less

Marks a fixing point through fittings or fixtures at depths up to 50mm. A unique patented tool designed so that one push quickly, easily and marks almost any surface. Push the Marxman pen into the fixture hole, and a burst of bright green chalk will mark the surface with the required drill hole point. • Bright green visible marker• Approx. 250 bursts• Fixture marking depth up to 50mm• Easy to remove• UK designed & manufactured• As seen on TV from BBC's Dragon's Den

Read more less

9 Compartments For small parts Transparent lid Metal flip up catch Lightweight yet tough Combination of plastic and metal on the handle give a comfortable, firm grip when carrying around

Read more less

A selection of commonly used zinc plated bolts, nuts and washers in a handy and reusable storage pack with clip-shut lid. Contents Hex Nuts (DIN 934): M6 (Qty 75), M8 (Qty 30), M10 (Qty 20) Form A Washers (DIN 125A): M6 (Qty 150), M8 (Qty 60), M10 (Qty 50) Set Screws (DIN 933): M6 x 16 (Qty 30), M6 x 20 (Qty 20), M6 x 25 (Qty 20), M8 x 30 (Qty 10), M8 x 40 (Qty 10), M8 x 50 (Qty 5), M10 x 60 (Qty 10), M10 x 70 (Qty 6), M10 x 75 (Qty 4) Corrosion Rating (1-5) 1 - Clean, dry & low humidity environments DIN DIN 125-A, DIN 933, DIN 934 Material Carbon Steel Pack Qty 500

Read more less

A selection of commonly used zinc plated carriage bolts, nuts and washers of various sizes in a handy and reusable storage pack with clip-shut lid. Contents Carriage Bolts (DIN 603): M6 x 40 (Qty 10), M8 x 50 (Qty 10), M8 x 75 (Qty 5), M10 x 100 (Qty 5), M10 x 120 (Qty 5), M10 x 150 (Qty 5) Nylon Nuts Type T (DIN 985): M6 (Qty 10), M8 (Qty 15), M10 (Qty 15) Form A Washers (DIN 125A): M6 (Qty 15), M8 (Qty 25), M10 (Qty 20) Corrosion Rating (1-5) 1 - Clean, dry & low humidity environments DIN DIN 125-A, DIN 603, DIN 985 Finish Zinc Material Carbon Steel Pack Qty 140

Read more less

A selection of commonly used zinc plated nuts in a handy and reusable storage pack with clip-shut lid. Contents Hex Nuts (DIN 934): M4 (Qty 150), M5 (Qty 110), M6 (Qty 100), M8 (Qty 90), M10 (Qty 40), M12 (Qty 30) Nylon Nuts Type T (DIN 985): M4 (Qty 150), M5 (Qty 110), M6 (Qty 80), M8 (Qty 40), M10 (Qty 15), M12 (Qty 10) Wing Nuts: M6 (Qty 30), M8 (Qty 15), M10 (Qty 10) Corrosion Rating (1-5) 1 - Clean, dry & low humidity environments DIN DIN 934, DIN 985 Finish Zinc Material Carbon Steel Pack Qty 980

Read more less

A selection of commonly used zinc plated washers in a handy and reusable storage pack with clip-shut lid. Contents Form A Washers (DIN125A): M4 (Qty 120), M5 (Qty 100), M6 (Qty 75), M8 (Qty 60), M10 (Qty 50), M12 (Qty 20) Penny/Repair Washers: M4 x 20 (Qty 50), M5 x 25 (Qty 30), M6 x 20 (Qty 30), M8 x 25 (Qty 20), M10 x 25 (Qty 20), M12 x 35 (Qty 20) Spring Washers (DIN 7980): M4 (Qty 100), M5 (Qty 100), M6 (Qty 75), M8 (Qty 60), M10 (Qty 50), M12 (Qty 20) Corrosion Rating (1-5) 1 - Clean, dry & low humidity environments DIN DIN 125-A, DIN 9054, DIN 7980 Finish Zinc Material Carbon Steel Pack Qty 1000

Read more less

A premium grade adhesive initially developed for the carpet and flooring industry. Effectively bonds PU and foam backed carpets, carpet tiles and underlay to concrete, screed, timber and metal. Ideal for: A wide variety of trade and domestic applications such as construction, automotive, shop fitting, furniture manufacturing, caravan fabrication, signage, hobbies and crafts, upholstery and much more. • To achieve a higher bonding strength, apply the adhesive to both surfaces• Heat resistant to +60°C Colour Amber Cure Time 24 hours for full cure Environments Interior Open/Working Time 2 Minutes Setting Time 30 Seconds Size 500ml Temperature Resistant (°C) 60

Read more less

N - Blue Phase Cable Ties (200mm x 4.8mm) with White Text Enhance your cable management with our N - Blue Phase Cable Ties, measuring 200mm x 4.8mm and featuring white text for clear identification. These high-quality ties are crafted from durable Nylon 6.6, ensuring strength and reliability for various applications. Key Features: Dimensions: 200mm length x 4.8mm width Color: Blue with white text for easy visibility Material: Nylon 6.6 (Polyamide 6.6) Temperature Resistance: Operates effectively between -40°C and +85°C Tensile Strength: Minimum of 22kg, ensuring secure bundling Flame Retardant: UL94V-2 rated for safety Pack Size: Available in packs of 100 Applications: Ideal for electrical installations, data centers, automotive wiring, and any scenario requiring organized and identifiable cable bundling. The white text on blue ties allows for quick phase identification, reducing errors and improving efficiency. Why Choose Our Cable Ties: Durability: Resistant to environmental factors, ensuring longevity. Clarity: White text stands out against the blue background for immediate recognition. Versatility: Suitable for both indoor and outdoor use across various industries.

Read more less

OB1® All Weather Repair Tape grips all surfaces smooth, rough and uneven. It has exceptional resistance to vibrations and deformations, as well as UV, frost and temperature, making it a versatile choice for all your interior and exterior repair projects. CHARACTERISTICS● 50mmx20m● UV/Weather resistant● Works in wet● -10c to +75c●Vibration tolerant APPLICATIONOB1® All Weather Repair Tape is ideal for repair, assembly, covering, & protecting all materials*● Surfaces must be clean and free from grease● Cut tape to the desired length● Apply to repair area and press firmly for 30 seconds for best adhesion (ensuring to press out air bubbles)● Can be used after 2hrs. Max strength after 24hrs  STORAGEStore in a clean and dry compartment between 10c and 35c for best performance. 36 months duration minimum after first use.  DIRECTIONS FOR USE*Not suitable for PP and PTFE. Not for use as an electrical tape.

Read more less

OB1® All Weather Repair Tape grips all surfaces smooth, rough and uneven. It has exceptional resistance to vibrations and deformations, as well as UV, frost and temperature, making it a versatile choice for all your interior and exterior repair projects. CHARACTERISTICS● 50mmx20m● UV/Weather resistant● Works in wet● -10c to +75c●Vibration tolerant APPLICATIONOB1® All Weather Repair Tape is ideal for repair, assembly, covering, & protecting all materials*● Surfaces must be clean and free from grease● Cut tape to the desired length● Apply to repair area and press firmly for 30 seconds for best adhesion (ensuring to press out air bubbles)● Can be used after 2hrs. Max strength after 24hrs  STORAGEStore in a clean and dry compartment between 10c and 35c for best performance. 36 months duration minimum after first use.  DIRECTIONS FOR USE*Not suitable for PP and PTFE. Not for use as an electrical tape.

Read more less

OB1® All Weather Repair Tape grips all surfaces smooth, rough and uneven. It has exceptional resistance to vibrations and deformations, as well as UV, frost and temperature, making it a versatile choice for all your interior and exterior repair projects. CHARACTERISTICS● 50mmx20m● UV/Weather resistant● Works in wet● -10c to +75c● Vibration tolerant APPLICATIONOB1® All Weather Repair Tape is ideal for repair, assembly, covering, & protecting all materials*● Surfaces must be clean and free from grease● Cut tape to the desired length● Apply to repair area and press firmly for 30 seconds for best adhesion (ensuring to press out air bubbles)● Can be used after 2hrs. Max strength after 24hrs  STORAGEStore in a clean and dry compartment between 10c and 35c for best performance. 36 months duration minimum after first use.  DIRECTIONS FOR USE*Not suitable for PP and PTFE. Not for use as an electrical tape.

Read more less

OB1® Diamond Crystal Clear Universal Sealant & Adhesive is a high quality, hybrid based formula. This crystal clear product is phthalate, tin and solvent free and cures under the influence of humidity to form a durable elastic rubber. Suitable for both interior and exterior applications. APPLICATIONSSpecifically developed as a crystal clear universal sealant and adhesive for interior and exterior use*. Can be used for all type of non-structural sealing applications where a minimum of joint movement is expected. Can also be used to seal and bond a wide variety of common building materials. CHARACTERISTICS● Crystal clear● High UV resistance● Multi-functional sealant and adhesive● Phthalate-free, tin-free, solvent free● Suitable for internal and external use* * OB1 Diamond Universal Sealant Crystal Clear has a high resistance against UV, however we recommend when using this product outside to avoid direct UV exposure. SHELF LIFEStore between +5°C and +25°C and in shaded conditions. Shelf life is 15 months when stored as recommended in original unopened packaging.

Read more less

OB1® Grip & Grab Adhesive is a unique solvent free construction adhesive with an exceptionally high initial grab followed by an incredible structural bond. It can be applied to Concrete, Most Stones, Ceramic, Marble, Wood, Gypsum Board, Metals, Lead, Glass, Mirror, Plastics (Excluding Polypropylene) and any combination of the above without any additional fixings. For application advice on sandstone type materials contact our technical department.  For application advice on powder coated substrates, contact powder coating manufacturer. APPLICATIONS • Apply 450mm x 13mm bead per kilogram weight on heavy vertical bonding.• For all applications, including general building maintenance OB1® Grip & Grab Adhesive bonds non-porous stone, concrete, natural stone, gypsum board, wood, glass, polycarbonate ceramics etc. For highly porous stone please contact Technical Services via website.• As universal adhesive OB1® Grip & Grab Adhesive bonds to most surfaces and does not attack synthetic material.• On mirrors (vertical strips), on natural stone, polyester, polystyrene foam (does not bleed through).• OB1® Grip & Grab Adhesive bonds copper, lead, zinc, aluminium, stainless steel, and is resistant to vibration. DELIVERY FORM OB1® Grip & Grab Adhesive is supplied in handy environmentally friendly 290ml Cartridge. DIRECTIONS FOR USE • Cut the tube at the nose and apply with the “v” in the nozzle facing up.• Porous stone should be sealed with a good quality PVA solution.• All surfaces should be clean and dry.• It is advisable that all Metal applications should be cleaned and de-greased with OB1® Multi Surface Cleaner• Apply in vertical stripes 10–20cm apart. Do not apply in dots.

Read more less

OB1® Heat Protect Fire Resistant Hybrid Sealant is tested to EN1366-4 and absorbs movements up to 25%. Our hybrid sealant can also be applied in horizontal joints and between walls, floors or ceilings to create a fire retardant seal. It can be used for joints up to 30mm wide and when used correctly, can help prevent the spreading of fire, smoke and toxic gases. OB1® HeatProtect Fire Resistant Hybrid Sealant is almost odourless, durable and can be used in interior and exterior applications due to high UV and weather resistance. Our hybrid sealant also resists fungal growth and vermin. OB1® HeatProtect Fire Resistant Hybrid Sealant can be overpainted with most water-based and oil based paints. CHARACTERISTICS• Up to 4 hours of fire resistance • Paintable with most water and oil based paints• Not corrosive towards metals• UV, weather and water resistant • Prevents unwanted airflows• Odourless STORAGE• Store between +5°C and +25°C and in shaded conditions.• Shelf life is 18 months when stored as recommended in original unopened packaging. LIMITATIONS• Not suitable for PE, PP, PC, PMMA, PTFE, soft plastics, neoprene and bituminous substrates.

Read more less

OB1®  HeatProtect 1200°C Instant Fire Cement Specialist Sealant was developed for sealing joints in heaters, open fire places and ovens. OB1 HeatProtect 1200°C Instant Fire Cement is a hardening, non-elastic product suitable for applications where no movement occurs. CHARACTERISTICS• Resistant to high temperatures up to 1200°C• Bonding and joining temperature resistant stones• Dries to hard, heat resistant seal • Suitable for heaters, fire places and ovens STORAGE• Store between +5°C and +25°C and in shaded conditions.• Shelf life is up to 9 months from date of production, when stored in a dry place and original unopened packaging. LIMITATIONS• Not suitable for PE, PP, PC, PMMA, PTFE, soft plastics, neoprene and bituminous substrates.• Not suitable for continuous exposure to water.

Read more less

OB1 Multi-Surface Cleaner is a high-performance, fast-acting solvent degreaser engineered for use on a wide range of materials. Perfect for preparing surfaces prior to sealing, bonding, or painting, it quickly removes grease, silicone, wax, tar, and adhesive residues without leaving an oily film. Safe for most rubbers, plastics, painted surfaces, glass, and metals, it’s suitable for both professional workshops and home use.● Cleans tools, workshop equipment, and mechanical components effectively● Leaves no oily residue—ideal for paint or sealant preparation● Removes stubborn contaminants including silicone, tar, and adhesives● Suitable for use on tile, stone, laminate, metal, and more● Safe for degreasing brakes, motors, and suspension parts● Easy to apply—spray from 20–30 cm, allow to dwell briefly, then wipe clean● Clear liquid with a +28°C flash point and a 24-month shelf life  

Read more less

WHY IS OB1® CONSTRUCTION SEALANT & ADHESIVE SO INCREDIBLE?  BONDS ALUMINIUM & WOODDepending on its moisture, softwoods and hardwoods expand and contract constantly, and some more than others. Aluminium expands and contracts in accordance to temperature. OB1® Construction Sealant & Adhesive will maintain its robust bond when cured from -40°C to +120°C and therefore is able to cope in harsh external weathering conditions and in a refrigerated environment. Its bond has the ability to elongate up to 350%. FOOD SAFE FORMULAOB1® Construction Sealant & Adhesive conforms to ISEGA Standards so it is the perfect solution for use in kitchens and food preparation areas. OB1® Construction Sealant & Adhesive bonds & seals marble, granite and quartz worktops in kitchens plus it’s guaranteed not to attack or stain surfaces. MARINE & POOL SEALANTThe original formula makes OB1® Construction Sealant & Adhesive the ideal sealant for under water applications even resistant to saltwater. Its hybrid polymer formulation can be applied under water and retains its initial bond. It also acts as a structural underwater bond in closed-face applications in swimming pools such as floor and wall tiles without the need to drain the pool. CARBON FIBRE, FIBREGLASS & GRPFor instant repair or bonding with carbon fibre materials, fibreglass and GRP, this all-in-one sealant, adhesive and filler is all you’ll ever need. OB1® Construction Sealant & Adhesive withstands vibration. PLASTIC TO METAL & STEELThe original solvent free hybrid polymer formula used in OB1® Construction Sealant & Adhesive allows flexible adhesion that can move with the expansion and contraction of metal and steel without etching or burning the surfaces. For polypropylene and polyethylene contact manufactures technical services. ENVIRONMENTALLY SOUNDOB1® Construction Sealant & Adhesive contains no solvents or isocyanates resulting in an A+ rating for air quality. It is odourless and kind to the environment as well as being safe for use in residential, domestic and industrial applications. SOLAR PANELSTypically solar panels are installed with mechanical fixings drilled into the roof substrate. They are sealed with silicone mastics which contain a solvent base. The solvent will eventually evaporate causing the mastic to collapse hence the seal/bond line failing. OB1® Construction Sealant & Adhesive does not contain any solvents so it will never crack, shrink or collapse, creating a permanent seal/bond. In addition it has a high resistance to weathering. MIRROR ADHESIVEOB1® Construction Sealant & Adhesive original formulation has no solvents or isocyanates so it will not degrade the back of mirrors. It also has an exceptionally strong initial grab. Depending on size and weight of mirror in most cases OB1® Construction Sealant & Adhesive does not require additional fixings while curing. SUPERIOR FOR BATHROOMSOB1® Construction Sealant & Adhesive features Zero VOC’s (volatile organic compounds) so it cures absolutely solid with no holes – unlike other sealants where bacteria can breed resulting in mould. OB1® Construction Sealant & Adhesive never shrinks or cracks. BONDS & SEALS LEAD FLASHINGSPerfect for roofing applications, OB1® Construction Sealant & Adhesive seals, grips and fills lead flashings to stone, brick and felt – even in the wet! FIX LEAKING GUTTERSGutters leak when the EPDM Seal degrades from exposure to the elements. Silicone sealants are often used to repair the seal, but the surface has to be dry first. Solvents within the sealant will evaporate causing it to shrink and collapse on the seal/bond line resulting in failure. OB1® Construction Sealant & Adhesive performs flawlessly even when applied under water, doesn’t contain solvents, so therefore will never shrink or crack. It’s the perfect repair for leaking gutters. GARDENING REPAIROB1® Construction Sealant & Adhesive the multi-surface garden repair product fixes your terracotta, ceramic, cracked concrete, slate and even broken pots and planters whether dry or wet. Repair garden pond ornaments even under water. OB1® Construction Sealant & Adhesive the total garden ornament repair product.

Read more less

WHY IS OB1® CONSTRUCTION SEALANT & ADHESIVE SO INCREDIBLE?  BONDS ALUMINIUM & WOODDepending on its moisture, softwoods and hardwoods expand and contract constantly, and some more than others. Aluminium expands and contracts in accordance to temperature. OB1® Construction Sealant & Adhesive will maintain its robust bond when cured from -40°C to +120°C and therefore is able to cope in harsh external weathering conditions and in a refrigerated environment. Its bond has the ability to elongate up to 350%. FOOD SAFE FORMULAOB1® Construction Sealant & Adhesive conforms to ISEGA Standards so it is the perfect solution for use in kitchens and food preparation areas. OB1® Construction Sealant & Adhesive bonds & seals marble, granite and quartz worktops in kitchens plus it’s guaranteed not to attack or stain surfaces. MARINE & POOL SEALANTThe original formula makes OB1® Construction Sealant & Adhesive the ideal sealant for under water applications even resistant to saltwater. Its hybrid polymer formulation can be applied under water and retains its initial bond. It also acts as a structural underwater bond in closed-face applications in swimming pools such as floor and wall tiles without the need to drain the pool. CARBON FIBRE, FIBREGLASS & GRPFor instant repair or bonding with carbon fibre materials, fibreglass and GRP, this all-in-one sealant, adhesive and filler is all you’ll ever need. OB1® Construction Sealant & Adhesive withstands vibration. PLASTIC TO METAL & STEELThe original solvent free hybrid polymer formula used in OB1® Construction Sealant & Adhesive allows flexible adhesion that can move with the expansion and contraction of metal and steel without etching or burning the surfaces. For polypropylene and polyethylene contact manufactures technical services. ENVIRONMENTALLY SOUNDOB1® Construction Sealant & Adhesive contains no solvents or isocyanates resulting in an A+ rating for air quality. It is odourless and kind to the environment as well as being safe for use in residential, domestic and industrial applications. SOLAR PANELSTypically solar panels are installed with mechanical fixings drilled into the roof substrate. They are sealed with silicone mastics which contain a solvent base. The solvent will eventually evaporate causing the mastic to collapse hence the seal/bond line failing. OB1® Construction Sealant & Adhesive does not contain any solvents so it will never crack, shrink or collapse, creating a permanent seal/bond. In addition it has a high resistance to weathering. MIRROR ADHESIVEOB1® Construction Sealant & Adhesive original formulation has no solvents or isocyanates so it will not degrade the back of mirrors. It also has an exceptionally strong initial grab. Depending on size and weight of mirror in most cases OB1® Construction Sealant & Adhesive does not require additional fixings while curing. SUPERIOR FOR BATHROOMSOB1® Construction Sealant & Adhesive features Zero VOC’s (volatile organic compounds) so it cures absolutely solid with no holes – unlike other sealants where bacteria can breed resulting in mould. OB1® Construction Sealant & Adhesive never shrinks or cracks. BONDS & SEALS LEAD FLASHINGSPerfect for roofing applications, OB1® Construction Sealant & Adhesive seals, grips and fills lead flashings to stone, brick and felt – even in the wet! FIX LEAKING GUTTERSGutters leak when the EPDM Seal degrades from exposure to the elements. Silicone sealants are often used to repair the seal, but the surface has to be dry first. Solvents within the sealant will evaporate causing it to shrink and collapse on the seal/bond line resulting in failure. OB1® Construction Sealant & Adhesive performs flawlessly even when applied under water, doesn’t contain solvents, so therefore will never shrink or crack. It’s the perfect repair for leaking gutters. GARDENING REPAIROB1® Construction Sealant & Adhesive the multi-surface garden repair product fixes your terracotta, ceramic, cracked concrete, slate and even broken pots and planters whether dry or wet. Repair garden pond ornaments even under water. OB1® Construction Sealant & Adhesive the total garden ornament repair product.

Read more less

WHY IS OB1® CONSTRUCTION SEALANT & ADHESIVE SO INCREDIBLE?  BONDS ALUMINIUM & WOODDepending on its moisture, softwoods and hardwoods expand and contract constantly, and some more than others. Aluminium expands and contracts in accordance to temperature. OB1® Construction Sealant & Adhesive will maintain its robust bond when cured from -40°C to +120°C and therefore is able to cope in harsh external weathering conditions and in a refrigerated environment. Its bond has the ability to elongate up to 350%. FOOD SAFE FORMULAOB1® Construction Sealant & Adhesive conforms to ISEGA Standards so it is the perfect solution for use in kitchens and food preparation areas. OB1® Construction Sealant & Adhesive bonds & seals marble, granite and quartz worktops in kitchens plus it’s guaranteed not to attack or stain surfaces. MARINE & POOL SEALANTThe original formula makes OB1® Construction Sealant & Adhesive the ideal sealant for under water applications even resistant to saltwater. Its hybrid polymer formulation can be applied under water and retains its initial bond. It also acts as a structural underwater bond in closed-face applications in swimming pools such as floor and wall tiles without the need to drain the pool. CARBON FIBRE, FIBREGLASS & GRPFor instant repair or bonding with carbon fibre materials, fibreglass and GRP, this all-in-one sealant, adhesive and filler is all you’ll ever need. OB1® Construction Sealant & Adhesive withstands vibration. PLASTIC TO METAL & STEELThe original solvent free hybrid polymer formula used in OB1® Construction Sealant & Adhesive allows flexible adhesion that can move with the expansion and contraction of metal and steel without etching or burning the surfaces. For polypropylene and polyethylene contact manufactures technical services. ENVIRONMENTALLY SOUNDOB1® Construction Sealant & Adhesive contains no solvents or isocyanates resulting in an A+ rating for air quality. It is odourless and kind to the environment as well as being safe for use in residential, domestic and industrial applications. SOLAR PANELSTypically solar panels are installed with mechanical fixings drilled into the roof substrate. They are sealed with silicone mastics which contain a solvent base. The solvent will eventually evaporate causing the mastic to collapse hence the seal/bond line failing. OB1® Construction Sealant & Adhesive does not contain any solvents so it will never crack, shrink or collapse, creating a permanent seal/bond. In addition it has a high resistance to weathering. MIRROR ADHESIVEOB1® Construction Sealant & Adhesive original formulation has no solvents or isocyanates so it will not degrade the back of mirrors. It also has an exceptionally strong initial grab. Depending on size and weight of mirror in most cases OB1® Construction Sealant & Adhesive does not require additional fixings while curing. SUPERIOR FOR BATHROOMSOB1® Construction Sealant & Adhesive features Zero VOC’s (volatile organic compounds) so it cures absolutely solid with no holes – unlike other sealants where bacteria can breed resulting in mould. OB1® Construction Sealant & Adhesive never shrinks or cracks. BONDS & SEALS LEAD FLASHINGSPerfect for roofing applications, OB1® Construction Sealant & Adhesive seals, grips and fills lead flashings to stone, brick and felt – even in the wet! FIX LEAKING GUTTERSGutters leak when the EPDM Seal degrades from exposure to the elements. Silicone sealants are often used to repair the seal, but the surface has to be dry first. Solvents within the sealant will evaporate causing it to shrink and collapse on the seal/bond line resulting in failure. OB1® Construction Sealant & Adhesive performs flawlessly even when applied under water, doesn’t contain solvents, so therefore will never shrink or crack. It’s the perfect repair for leaking gutters. GARDENING REPAIROB1® Construction Sealant & Adhesive the multi-surface garden repair product fixes your terracotta, ceramic, cracked concrete, slate and even broken pots and planters whether dry or wet. Repair garden pond ornaments even under water. OB1® Construction Sealant & Adhesive the total garden ornament repair product.

Read more less

WHY IS OB1® CONSTRUCTION SEALANT & ADHESIVE SO INCREDIBLE?  BONDS ALUMINIUM & WOODDepending on its moisture, softwoods and hardwoods expand and contract constantly, and some more than others. Aluminium expands and contracts in accordance to temperature. OB1® Construction Sealant & Adhesive will maintain its robust bond when cured from -40°C to +120°C and therefore is able to cope in harsh external weathering conditions and in a refrigerated environment. Its bond has the ability to elongate up to 350%. FOOD SAFE FORMULAOB1® Construction Sealant & Adhesive conforms to ISEGA Standards so it is the perfect solution for use in kitchens and food preparation areas. OB1® Construction Sealant & Adhesive bonds & seals marble, granite and quartz worktops in kitchens plus it’s guaranteed not to attack or stain surfaces. MARINE & POOL SEALANTThe original formula makes OB1® Construction Sealant & Adhesive the ideal sealant for under water applications even resistant to saltwater. Its hybrid polymer formulation can be applied under water and retains its initial bond. It also acts as a structural underwater bond in closed-face applications in swimming pools such as floor and wall tiles without the need to drain the pool. CARBON FIBRE, FIBREGLASS & GRPFor instant repair or bonding with carbon fibre materials, fibreglass and GRP, this all-in-one sealant, adhesive and filler is all you’ll ever need. OB1® Construction Sealant & Adhesive withstands vibration. PLASTIC TO METAL & STEELThe original solvent free hybrid polymer formula used in OB1® Construction Sealant & Adhesive allows flexible adhesion that can move with the expansion and contraction of metal and steel without etching or burning the surfaces. For polypropylene and polyethylene contact manufactures technical services. ENVIRONMENTALLY SOUNDOB1® Construction Sealant & Adhesive contains no solvents or isocyanates resulting in an A+ rating for air quality. It is odourless and kind to the environment as well as being safe for use in residential, domestic and industrial applications. SOLAR PANELSTypically solar panels are installed with mechanical fixings drilled into the roof substrate. They are sealed with silicone mastics which contain a solvent base. The solvent will eventually evaporate causing the mastic to collapse hence the seal/bond line failing. OB1® Construction Sealant & Adhesive does not contain any solvents so it will never crack, shrink or collapse, creating a permanent seal/bond. In addition it has a high resistance to weathering. MIRROR ADHESIVEOB1® Construction Sealant & Adhesive original formulation has no solvents or isocyanates so it will not degrade the back of mirrors. It also has an exceptionally strong initial grab. Depending on size and weight of mirror in most cases OB1® Construction Sealant & Adhesive does not require additional fixings while curing. SUPERIOR FOR BATHROOMSOB1® Construction Sealant & Adhesive features Zero VOC’s (volatile organic compounds) so it cures absolutely solid with no holes – unlike other sealants where bacteria can breed resulting in mould. OB1® Construction Sealant & Adhesive never shrinks or cracks. BONDS & SEALS LEAD FLASHINGSPerfect for roofing applications, OB1® Construction Sealant & Adhesive seals, grips and fills lead flashings to stone, brick and felt – even in the wet! FIX LEAKING GUTTERSGutters leak when the EPDM Seal degrades from exposure to the elements. Silicone sealants are often used to repair the seal, but the surface has to be dry first. Solvents within the sealant will evaporate causing it to shrink and collapse on the seal/bond line resulting in failure. OB1® Construction Sealant & Adhesive performs flawlessly even when applied under water, doesn’t contain solvents, so therefore will never shrink or crack. It’s the perfect repair for leaking gutters. GARDENING REPAIROB1® Construction Sealant & Adhesive the multi-surface garden repair product fixes your terracotta, ceramic, cracked concrete, slate and even broken pots and planters whether dry or wet. Repair garden pond ornaments even under water. OB1® Construction Sealant & Adhesive the total garden ornament repair product.

Read more less

WHY IS OB1® CONSTRUCTION SEALANT & ADHESIVE SO INCREDIBLE?  BONDS ALUMINIUM & WOODDepending on its moisture, softwoods and hardwoods expand and contract constantly, and some more than others. Aluminium expands and contracts in accordance to temperature. OB1® Construction Sealant & Adhesive will maintain its robust bond when cured from -40°C to +120°C and therefore is able to cope in harsh external weathering conditions and in a refrigerated environment. Its bond has the ability to elongate up to 350%. FOOD SAFE FORMULAOB1® Construction Sealant & Adhesive conforms to ISEGA Standards so it is the perfect solution for use in kitchens and food preparation areas. OB1® Construction Sealant & Adhesive bonds & seals marble, granite and quartz worktops in kitchens plus it’s guaranteed not to attack or stain surfaces. MARINE & POOL SEALANTThe original formula makes OB1® Construction Sealant & Adhesive the ideal sealant for under water applications even resistant to saltwater. Its hybrid polymer formulation can be applied under water and retains its initial bond. It also acts as a structural underwater bond in closed-face applications in swimming pools such as floor and wall tiles without the need to drain the pool. CARBON FIBRE, FIBREGLASS & GRPFor instant repair or bonding with carbon fibre materials, fibreglass and GRP, this all-in-one sealant, adhesive and filler is all you’ll ever need. OB1® Construction Sealant & Adhesive withstands vibration. PLASTIC TO METAL & STEELThe original solvent free hybrid polymer formula used in OB1® Construction Sealant & Adhesive allows flexible adhesion that can move with the expansion and contraction of metal and steel without etching or burning the surfaces. For polypropylene and polyethylene contact manufactures technical services. ENVIRONMENTALLY SOUNDOB1® Construction Sealant & Adhesive contains no solvents or isocyanates resulting in an A+ rating for air quality. It is odourless and kind to the environment as well as being safe for use in residential, domestic and industrial applications. SOLAR PANELSTypically solar panels are installed with mechanical fixings drilled into the roof substrate. They are sealed with silicone mastics which contain a solvent base. The solvent will eventually evaporate causing the mastic to collapse hence the seal/bond line failing. OB1® Construction Sealant & Adhesive does not contain any solvents so it will never crack, shrink or collapse, creating a permanent seal/bond. In addition it has a high resistance to weathering. MIRROR ADHESIVEOB1® Construction Sealant & Adhesive original formulation has no solvents or isocyanates so it will not degrade the back of mirrors. It also has an exceptionally strong initial grab. Depending on size and weight of mirror in most cases OB1® Construction Sealant & Adhesive does not require additional fixings while curing. SUPERIOR FOR BATHROOMSOB1® Construction Sealant & Adhesive features Zero VOC’s (volatile organic compounds) so it cures absolutely solid with no holes – unlike other sealants where bacteria can breed resulting in mould. OB1® Construction Sealant & Adhesive never shrinks or cracks. BONDS & SEALS LEAD FLASHINGSPerfect for roofing applications, OB1® Construction Sealant & Adhesive seals, grips and fills lead flashings to stone, brick and felt – even in the wet! FIX LEAKING GUTTERSGutters leak when the EPDM Seal degrades from exposure to the elements. Silicone sealants are often used to repair the seal, but the surface has to be dry first. Solvents within the sealant will evaporate causing it to shrink and collapse on the seal/bond line resulting in failure. OB1® Construction Sealant & Adhesive performs flawlessly even when applied under water, doesn’t contain solvents, so therefore will never shrink or crack. It’s the perfect repair for leaking gutters. GARDENING REPAIROB1® Construction Sealant & Adhesive the multi-surface garden repair product fixes your terracotta, ceramic, cracked concrete, slate and even broken pots and planters whether dry or wet. Repair garden pond ornaments even under water. OB1® Construction Sealant & Adhesive the total garden ornament repair product.

Read more less

WHY IS OB1® CONSTRUCTION SEALANT & ADHESIVE SO INCREDIBLE?  BONDS ALUMINIUM & WOODDepending on its moisture, softwoods and hardwoods expand and contract constantly, and some more than others. Aluminium expands and contracts in accordance to temperature. OB1® Construction Sealant & Adhesive will maintain its robust bond when cured from -40°C to +120°C and therefore is able to cope in harsh external weathering conditions and in a refrigerated environment. Its bond has the ability to elongate up to 350%. FOOD SAFE FORMULAOB1® Construction Sealant & Adhesive conforms to ISEGA Standards so it is the perfect solution for use in kitchens and food preparation areas. OB1® Construction Sealant & Adhesive bonds & seals marble, granite and quartz worktops in kitchens plus it’s guaranteed not to attack or stain surfaces. MARINE & POOL SEALANTThe original formula makes OB1® Construction Sealant & Adhesive the ideal sealant for under water applications even resistant to saltwater. Its hybrid polymer formulation can be applied under water and retains its initial bond. It also acts as a structural underwater bond in closed-face applications in swimming pools such as floor and wall tiles without the need to drain the pool. CARBON FIBRE, FIBREGLASS & GRPFor instant repair or bonding with carbon fibre materials, fibreglass and GRP, this all-in-one sealant, adhesive and filler is all you’ll ever need. OB1® Construction Sealant & Adhesive withstands vibration. PLASTIC TO METAL & STEELThe original solvent free hybrid polymer formula used in OB1® Construction Sealant & Adhesive allows flexible adhesion that can move with the expansion and contraction of metal and steel without etching or burning the surfaces. For polypropylene and polyethylene contact manufactures technical services. ENVIRONMENTALLY SOUNDOB1® Construction Sealant & Adhesive contains no solvents or isocyanates resulting in an A+ rating for air quality. It is odourless and kind to the environment as well as being safe for use in residential, domestic and industrial applications. SOLAR PANELSTypically solar panels are installed with mechanical fixings drilled into the roof substrate. They are sealed with silicone mastics which contain a solvent base. The solvent will eventually evaporate causing the mastic to collapse hence the seal/bond line failing. OB1® Construction Sealant & Adhesive does not contain any solvents so it will never crack, shrink or collapse, creating a permanent seal/bond. In addition it has a high resistance to weathering. MIRROR ADHESIVEOB1® Construction Sealant & Adhesive original formulation has no solvents or isocyanates so it will not degrade the back of mirrors. It also has an exceptionally strong initial grab. Depending on size and weight of mirror in most cases OB1® Construction Sealant & Adhesive does not require additional fixings while curing. SUPERIOR FOR BATHROOMSOB1® Construction Sealant & Adhesive features Zero VOC’s (volatile organic compounds) so it cures absolutely solid with no holes – unlike other sealants where bacteria can breed resulting in mould. OB1® Construction Sealant & Adhesive never shrinks or cracks. BONDS & SEALS LEAD FLASHINGSPerfect for roofing applications, OB1® Construction Sealant & Adhesive seals, grips and fills lead flashings to stone, brick and felt – even in the wet! FIX LEAKING GUTTERSGutters leak when the EPDM Seal degrades from exposure to the elements. Silicone sealants are often used to repair the seal, but the surface has to be dry first. Solvents within the sealant will evaporate causing it to shrink and collapse on the seal/bond line resulting in failure. OB1® Construction Sealant & Adhesive performs flawlessly even when applied under water, doesn’t contain solvents, so therefore will never shrink or crack. It’s the perfect repair for leaking gutters. GARDENING REPAIROB1® Construction Sealant & Adhesive the multi-surface garden repair product fixes your terracotta, ceramic, cracked concrete, slate and even broken pots and planters whether dry or wet. Repair garden pond ornaments even under water. OB1® Construction Sealant & Adhesive the total garden ornament repair product.

Read more less

OB1® PaintersPal is a universal glazing sealant, which can be applied on laminated, single, insulation, burglar-proof and self-cleaning glass. OB1® PaintersPal adheres perfectly without primer on most, even damp, surfaces. OB1® PaintersPal is non-corrosive towards metals, does not shrink and is bubble free. OB1® PaintersPal is the solution for interior and exterior building and glazing. CHARACTERISTICS● Does not shrink and is bubble-free● Non-corrosive towards metals● Has good UV resistance● Free from isocyanates, solvents and silicones● Can be used for interiors, exteriors, building and glazing STORAGEShelf life in original sealed packaging: 18 months stored in shaded conditions between 5°C to 25°C. LIMITATIONSNot suitable for PE, PP, PC, PMMA, PTFE, soft plastics, neoprene and bituminous substrates. Not suitable for natural stone and mirrors. Not suitable in combination with chlorides (pools).  

Read more less

The OB1 Panel Pal White is a high-performance, solvent-free grab adhesive and sealant designed for fast, strong bonding and sealing across a wide range of materials. Whether you’re installing panels, cladding, or trims, Panel Pal offers exceptional initial grab and long-lasting adhesion—perfect for both DIY and professional applications. Key Features:● Strong Instant Grab: Reduces the need for additional fixings during installation.● White Finish: Provides a clean, professional look with excellent colour retention.● Versatile Use: Bonds to wood, PVC, metal, plasterboard, ceramics, concrete, and more.● Flexible & Durable: Accommodates slight movement without cracking or shrinking.● Solvent-Free & Low Odour: Safer for indoor use and environmentally friendlier.

Read more less

OB1® PlumbersPal is a premium, high strength sealant and adhesive specifically developed for the sealing of expansion joints in sanitary applications such as kitchens, bathrooms and industrial applications. It adheres perfectly without primer on most substrates. OB1® PlumbersPal is almost odourless, permamently elastic, offers mould, weather and high UV resistance, and can be used for interior and exterior projects. The formulation conforms to BREEAM specification Hea 02 Indoor Air Quality, regarding volatile organic compound (VOC) emission levels. OB1® PlumbersPal can be overpainted with water-based and most 2 component paints. It is recommended to paint a few days after application. CHARACTERISTICS● Works in water● Mould resistant● UV and weather resistant● Excellent chemical resistance● Non-staining● Permanently elastic● Paintable STORAGEShelf life in original sealed packaging: 24 months stored in shaded conditions between 5°C to 25°C. LIMITATIONSNot suitable for continuous exposure to water (during curing).Not suitable for PE, PP, PC, PMMA, PTFE, soft plastics, neoprene and bituminous substrates. Not suitable in combination with chlorides (pools).      

Read more less

OB1® Sealant Remover is a low odour formulation that does not contain halogenated solvents, heavy metals, cyanide or water. It removes silicone and sealants quickly and effectively and will also help to remove silicone overspray on masonry and silicone oil stains on porous materials. CHARACTERISTICS● Removes silicone and sealants quickly● Highly effective ● Low odour STORAGEStore locked up in dry conditions between 0ºC and +30ºC in original, unopened container and protect from frost. Some darkening may occur during storage. Shelf life is 12 months from date of manufacture. DIRECTIONS FOR USETo remove silicone sealants or gaskets, carefully cut away as much of the silicone as possible. Apply OB1 Sealant Remover to completely cover the remaining silicone that needs to be removed. The depth of cover should be at least twice as deep as the depth of silicone to be removed. Leave to sit for 1-12 hrs (time varies depending on the characteristics of the substrate). Rinse thoroughly with water and repeat process if necessary.

Read more less

OB1® Sealant Smoothing Tools, for use on silicone, acrylic and hybrid joins. Giving a professional finish to straight joints. Features & Benefits:● 4 Pack● Professional finish● Removes surplus sealant whilst perfecting the angle of joins● Smooths joint faster and easier

Read more less

The OB1 TilersPal Hybrid Adhesive is a high-performance, professional-grade tile adhesive designed to provide superior bonding strength, instant hold, and long-lasting durability for both interior and exterior tiling applications. Whether you're working on small repairs, minor tiling jobs, or full-scale installations, this ready-mixed, neutral cure adhesive ensures strong adhesion and easy application across various surfaces.  

Read more less

OB21™ Premium Bath & Shower Silicone is the ultimate solution for sealing around baths, basins and sanitary ware. It is equally adept at sealing glass and glazed surfaces, plus areas of high humidity. With exceptional water, UV, and weather resistance, it ensures a long lasting, protective seal. CHARACTERISTICS 310ml Cartridge Permanently elastic Weather resistant, with excellent resistance to UV Interior & exterior use Low VOC content STORAGE Shelf life in original sealed packaging: 18 months stored in frost free and dry environment between 5°C to 25°C. LIMITATIONS Not suitable for PE, PP, PC, PMMA, PTFE, soft plastics, neoprene, and bituminous substrates. Not suitable for applications on concrete, marble, lead, copper and galvanised steel.

Read more less

OB21™ Premium Bath & Shower Silicone is the ultimate solution for sealing around baths, basins and sanitary ware. It is equally adept at sealing glass and glazed surfaces, plus areas of high humidity. With exceptional water, UV, and weather resistance, it ensures a long lasting, protective seal. CHARACTERISTICS 310ml Cartridge Permanently elastic Weather resistant, with excellent resistance to UV Interior & exterior use Low VOC content STORAGE Shelf life in original sealed packaging: 18 months stored in frost free and dry environment between 5°C to 25°C. LIMITATIONS Not suitable for PE, PP, PC, PMMA, PTFE, soft plastics, neoprene, and bituminous substrates. Not suitable for applications on concrete, marble, lead, copper and galvanised steel.

Read more less

OB21™ Professional Builders Universal Silicone is the ultimate builders silicone for sealing expansion joints in concrete, brickwork, connection joints, glazing, kitchens, bathrooms and industrial applications. Plus, it is odourless and has excellent resistance to water, UV and weather, and bonds perfectly without primer on most substrates. Perfect for robust, reliable sealing! CHARACTERISTICS 310ml Cartridge Superior strong bond Weather resistant, with excellent resistance to UV Low VOC content ISEGA Certified – safe for use in food preparation areas STORAGE Shelf life in original sealed packaging: 18 months stored in frost free and dry environment between 5°C to 25°C. LIMITATIONS Not suitable for PE, PP, PC, PMMA, PTFE, soft plastics, neoprene, and bituminous substrates. Discoloration can occur in dark places and by contact with chemicals.

Read more less

OB21™ Professional Builders Universal Silicone is the ultimate builders silicone for sealing expansion joints in concrete, brickwork, connection joints, glazing, kitchens, bathrooms and industrial applications. Plus, it is odourless and has excellent resistance to water, UV and weather, and bonds perfectly without primer on most substrates. Perfect for robust, reliable sealing! CHARACTERISTICS 310ml Cartridge Superior strong bond Weather resistant, with excellent resistance to UV Low VOC content ISEGA Certified – safe for use in food preparation areas STORAGE Shelf life in original sealed packaging: 18 months stored in frost free and dry environment between 5°C to 25°C. LIMITATIONS Not suitable for PE, PP, PC, PMMA, PTFE, soft plastics, neoprene, and bituminous substrates. Discoloration can occur in dark places and by contact with chemicals.

Read more less

A high quality curved claw hammer, ideal for demanding jobs and fast nail driving. Manufactured from a single piece of hardened steel with a soft-grip handle to enhance comfort and reduce fatigue. • Precision balanced for enhanced driving force• Ergonomic anti-slip grip for safety, increased user comfort and long lasting performance• Curved claw head for effortless nail and pin removal• High strength single piece steel to maximise driving force whilst minimising user fatigue Brand TIMCO Handle Material Thermoplastic Rubber (TPR) Head Type Curved Head Weight 16oz Head Weight (kg) 0.45 Head Weight (oz) 16 Neck Material Single Piece Steel Size (inch) 12 3⁄4  Size (mm) 327 Total L (inch) 12 3⁄4  Total L (mm) 327

Read more less

A high quality curved claw hammer, ideal for demanding jobs and fast nail driving. Manufactured from a single piece of hardened steel with a soft-grip handle to enhance comfort and reduce fatigue. • Precision balanced for enhanced driving force• Ergonomic anti-slip grip for safety, increased user comfort and long lasting performance• Curved claw head for effortless nail and pin removal• High strength single piece steel to maximise driving force whilst minimising user fatigue Brand TIMCO Handle Material Thermoplastic Rubber (TPR) Head Type Curved Head Weight 20oz Head Weight (kg) 0.56 Head Weight (oz) 20 Neck Material Single Piece Steel Size (inch) 13 3⁄4  Size (mm) 350 Total L (inch) 13 3⁄4  Total L (mm) 350

Read more less

PVC Insulation Tape is a durable, flexible adhesive tape made from Polyvinyl Chloride (PVC). It's widely used for electrical insulation, bundling, and protecting wiring in various industries. Its heat resistance, flexibility, and strong adhesion make it ideal for securing and insulating electrical connections, preventing short circuits, and ensuring safety in both residential and industrial applications. PVC insulation tape is available in a range of colours, making it useful for colour-coding wires and components. Orange PVC Insulation Tape - 20m (length) x 19mm (width)  • Material: PVC• Working Temperature: -18℃ to 105℃• Tensile Strength: 22N/10mm• Adhesion to steel – 2.5 N/10mm• Elongation: 125%• Dielectric Strength: 40kV/mm

Read more less

Unique Power6™ Insert Bit (25mm)

Read more less

A premium quality latex based primer, admixture and bonding agent. The reinforced anti-foaming polymer formula increases the water resistance, durability and flexibility of concrete, mortar, renders, floor screeds and adhesive compounds. Ideally suited for pointing, patching, bedding, waterproofing, tanking and flooring. Especially in wet, humid, damp environments. Unlike water based admixtures, SBR bond is suitable for external applications.  Brand TIMCO Colour White Environments Interior & Exterior Size 5L UFI Number KHM2-3PP1-H00G-8TNX Viscosity Low

Read more less

A premium quality claw hammer, ideal for rapid nail driving and ripping down framing. Manufactured from a single piece of toughened steel. Featuring a super soft-grip handle, heavy duty, heat treated and tempered strike face for long life and a precision engineered and balanced head for a faster swing with reduced fatigue. Also features a built in magnetic nail holder to assist with single handed nail driving. Ideal for a variety of professional • Precision engineered for enhanced control and striking performance• Ergonomic anti-slip grip• Rip claw head for prying, demolition and framing• Anti-shock and vibration resistant• Nail starter assists quick installation• Heat treated and tempered  Brand TIMCO Head Type Straight Head Weight 16oz Head Weight (kg) 0.45 Head Weight (oz) 16 Neck Material Single Piece Steel Size (inch) 15 3⁄4  Size (mm) 400 Total L (inch) 15 3⁄4  Total L (mm) 400

Read more less

A premium grade polyurethane wood adhesive that will bond hard, soft, exotic and painted wood. This rapid curing foaming adhesive expands into materials to form an incredibly strong bond. Once set it is 100% waterproof to EN 204 D4 and has excellent chemical resistance. Due to the multi-purpose properties, this industrial strength adhesive can also be used to adhere a wide variety of building materials such as metal, various plastics (including PVC), polystyrene, stone, brick & masonry.  • Once set it is 100% water resistant to EN 204 D4• Has excellent chemical resistance• Foams during curing to fill gaps and increased adhesion performance• Temperature resistant from -30°C to +150°C BS EN Classification BS EN 204 (D4) Colour Translucent Cure Time 12 hours for full cure Environments Interior & Exterior Material Polyurethane (PU) Open/Working Time 30 Minutes Setting Time 60 Minutes Strength D4 Substrates Hardwood, Softwood, Plywood, Chipboard, MDF, Fireboard Temperature Resistant (°C) -30 to +150 Type Gel UFI Number 7783-5Q4Q-800P-301N  Viscosity High

Read more less

A premium grade polyurethane wood adhesive that will bond hard, soft, exotic and painted wood. This rapid curing foaming adhesive expands into materials to form an incredibly strong bond. Once set it is 100% waterproof to EN 204 D4 and has excellent chemical resistance. Due to the multi-purpose properties, this industrial strength adhesive can also be used to adhere a wide variety of building materials such as metal, various plastics (including PVC), polystyrene, stone, brick & masonry.  • Once set it is 100% water resistant to EN 204 D4• Has excellent chemical resistance• Foams during curing to fill gaps and increased adhesion performance• Temperature resistant from -30°C to +150°C BS EN Classification BS EN 204 (D4) Colour Brown Cure Time 24 hours for full cure Environments Interior & Exterior Material Polyurethane (PU) Open/Working Time 30 Minutes Setting Time 60 Minutes Size 750g Strength D4 Substrates Hardwood, Softwood, Plywood, Chipboard, MDF, Fireboard Temperature Resistant (°C) -30 to +150 Type Liquid UFI Number 1000-A0PG-V008-26VD Viscosity Medium

Read more less

A premium grade polyurethane wood adhesive that will bond hard, soft, exotic and painted wood. This rapid curing foaming adhesive expands into materials to form an incredibly strong bond. Once set it is 100% waterproof to EN 204 D4 and has excellent chemical resistance. Due to the multi-purpose properties, this industrial strength adhesive can also be used to adhere a wide variety of building materials such as metal, various plastics (including PVC), polystyrene, stone, brick & masonry.  • Once set it is 100% water resistant to EN 204 D4• Has excellent chemical resistance• Foams during curing to fill gaps and increased adhesion performance• Temperature resistant from -30°C to +150°C BS EN Classification BS EN 204 (D4) Colour Translucent Cure Time 12 hours for full cure Environments Interior & Exterior Material Polyurethane (PU) Open/Working Time 5 Minutes Setting Time 20 Minutes Strength D4 Substrates Hardwood, Softwood, Plywood, Chipboard, MDF, Fireboard Temperature Resistant (°C) -30 to +150 Type Gel UFI Number WW22-MQ4S-P006-MYNM Viscosity High

Read more less

A premium grade polyurethane wood adhesive that will bond hard, soft, exotic and painted wood. This rapid curing foaming adhesive expands into materials to form an incredibly strong bond. Due to the multi-purpose properties, this industrial strength adhesive can also be used to adhere a wide variety of building materials such as metal, various plastics (including PVC), polystyrene, stone, brick & masonry.  • Once set it is 100% water resistant to EN 204 D4• Has excellent chemical resistance• Foams during curing to fill gaps and increased adhesion performance• Temperature resistant from -30°C to +150°C BS EN Classification BS EN 204 (D4) Colour Brown Cure Time 24 hours for full cure Environments Interior & Exterior Material Polyurethane (PU) Open/Working Time 5 Minutes Setting Time 20 Minutes Size 750g Strength D4 Substrates Hardwood, Softwood, Plywood, Chipboard, MDF, Fireboard Temperature Resistant (°C) -30 to +150 Type Liquid UFI Number 5U04-VQWV-F00N-A8DN Viscosity Medium

Read more less

PVC Insulation Tape is a durable, flexible adhesive tape made from Polyvinyl Chloride (PVC). It's widely used for electrical insulation, bundling, and protecting wiring in various industries. Its heat resistance, flexibility, and strong adhesion make it ideal for securing and insulating electrical connections, preventing short circuits, and ensuring safety in both residential and industrial applications. PVC insulation tape is available in a range of colours, making it useful for colour-coding wires and components. Purple PVC Insulation Tape - 20m (length) x 19mm (width)  • Material: PVC• Working Temperature: -18℃ to 105℃• Tensile Strength: 22N/10mm• Adhesion to steel – 2.5 N/10mm• Elongation: 125%• Dielectric Strength: 40kV/mm

Read more less