Sets, Packs & Tubs

C2 is a revolutionary high-performance screw designed using modern manufacturing methods and an innovative twin-cut point, ensuring consistent and rapid pick-up while reducing timber splitting. Its superior holding strength in a wide variety of materials provides ultimate performance. • Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw• Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage• Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating• Dual angle thread for ultimate performance and exceptionally high pull-out resistance• Patented twin cut technology for rapid "pick-up" and reduces timber splitting• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length Application Joinery, Carpentry, Timber Construction, Furniture Manufacturing Brand TIMCO CE Standard BS EN 14592:2008 Colour Yellow Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 8 Head Ø (mm) 7.7 Head Type Double Countersunk Indoor/Outdoor Usage Indoor, Covered Outdoor Inner Thread Ø d1 (mm) 2.35 L (inch) 1 1⁄4  L (mm) 30 Lubrication Gleitmo Material Hardened Steel Ø (mm) 4 Pack Qty 1000 Point Type Twin-Cut Recess Type Pozi Resistant Type Corrosion-Resistant Size 4.0 x 30 Size (imp.) 8 x 1 1⁄4  Size (mm) 4.0 x 30 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread Coverage Fully Threaded Thread L (mm) 25 Thread Ø (mm) 4 Thread Type 40° Single Deep  

Read more less

A single thread woodscrew mainly used in various types of timber and man-made boards or into masonry with the use of a plastic plug. • Double countersunk reduces the likelihood of head shear and assists completion of countersinking• Wax lubricated to enhance screw insertion time, extra driving torque and resistance to corrosion• 40° deep single thread to provide a secure fixing with high pull-out resistance• 25° sharp point and single lead for a fast start and improved thread acceptance• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length Brand TIMCO CE Standard BS EN 14592:2008 Corrosion Rating (1-5) 1 - Clean, dry & low humidity environments Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 8 Head Ø (mm) 7.62 Head Type Double Countersunk Inner Thread Ø d1 (mm) 2.5 L (inch) 1 1⁄4  L (mm) 30 Lubrication Wax Material Carbon Steel Ø (mm) 4 Pack Qty 1000 Point Type 25° Sharp Recess Type Pozi Size (imp.) 8 x 1 1⁄4  Size (mm) 4.0 x 30 Substrates Softwood, Chipboard, MDF, Masonry (with plug) Thread Coverage Fully Threaded Thread L (mm) 25 Thread Ø (mm) 4 Thread Type 40° Single Deep

Read more less

C2 is a revolutionary high-performance screw designed using modern manufacturing methods and an innovative twin-cut point, ensuring consistent and rapid pick-up while reducing timber splitting. Its superior holding strength in a wide variety of materials provides ultimate performance. • Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw• Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage• Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating• Dual angle thread for ultimate performance and exceptionally high pull-out resistance• Patented twin cut technology for rapid "pick-up" and reduces timber splitting• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length Application Joinery, Carpentry, Timber Construction, Furniture Manufacturing Brand TIMCO CE Standard BS EN 14592:2008 Colour Yellow Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 8 Head Ø (mm) 7.7 Head Type Double Countersunk Indoor/Outdoor Usage Indoor, Covered Outdoor Inner Thread Ø d1 (mm) 2.35 L (inch) 1 1⁄2  L (mm) 40 Lubrication Gleitmo Material Hardened Steel Ø (mm) 4 Pack Qty 1000 Point Type Twin-Cut Recess Type Pozi Resistant Type Corrosion-Resistant Size 4.0 x 40 Size (imp.) 8 x 1 1⁄2  Size (mm) 4.0 x 40 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread Coverage Fully Threaded Thread L (mm) 35 Thread Ø (mm) 4 Thread Type 40° Single Deep  

Read more less

A single thread woodscrew mainly used in various types of timber and man-made boards or into masonry with the use of a plastic plug. • Double countersunk reduces the likelihood of head shear and assists completion of countersinking• Wax lubricated to enhance screw insertion time, extra driving torque and resistance to corrosion• 40° deep single thread to provide a secure fixing with high pull-out resistance• 25° sharp point and single lead for a fast start and improved thread acceptance• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length Brand TIMCO CE Standard BS EN 14592:2008 Corrosion Rating (1-5) 1 - Clean, dry & low humidity environments Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 8 Head Ø (mm) 7.62 Head Type Double Countersunk Inner Thread Ø d1 (mm) 2.5 L (inch) 1 1⁄2 L (mm) 40 Lubrication Wax Material Carbon Steel Ø (mm) 4 Pack Qty 1000 Point Type 25° Sharp Recess Type Pozi Size (imp.) 8 x 1 1⁄2 Size (mm) 4.0 x 40 Substrates Softwood, Chipboard, MDF, Masonry (with plug) Thread Coverage Fully Threaded Thread L (mm) 35 Thread Ø (mm) 4 Thread Type 40° Single Deep

Read more less

A single thread woodscrew mainly used in various types of timber and man-made boards or into masonry with the use of a plastic plug. • Double countersunk reduces the likelihood of head shear and assists completion of countersinking• Wax lubricated to enhance screw insertion time, extra driving torque and resistance to corrosion• 40° deep single thread to provide a secure fixing with high pull-out resistance• 25° sharp point and single lead for a fast start and improved thread acceptance• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length Brand TIMCO Corrosion Rating (1-5) 1 - Clean, dry & low humidity environments Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 8 Head Ø (mm) 7.62 Head Type Double Countersunk Inner Thread Ø d1 (mm) 2.5 L (inch) 1 1/2 L (mm) 40 Lubrication Wax Material Carbon Steel Pack Qty 1000 Point Type 25° Sharp Recess Type Pozi Size (imp.) 8 x 1 1/2 Size (mm) 4.0 x 40 Substrates Softwood, Chipboard, MDF, Masonry (with plug) Thread Coverage Fully Threaded Thread L (mm) 35 Thread Ø (mm) 4 Thread Type 40° Single Deep

Read more less

The unique patented Velocity screw has been specifically designed to give rapid installation into many different materials, whilst achieving exceptional pull-out resistance. It has been designed to give the user a consistent and reliable product that can be used in a variety of applications. • Dual angle thread designed for superior hold• Partially threaded stops the timber jacking. NOTE: Partially threaded from 40mm• Rapid drive twist cut enhances drive performance• Slash point tip helps prevent the timber splitting when screwing close to the edge, whilst also helping to reduce torque. NOTE: Slash point from 25mm and above Brand TIMCO CE Standard BS EN 14592:2008 Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 8 Head Ø (mm) 7.71 Head Type Double Countersunk with Ribs Inner Thread Ø d1 (mm) 2.52 L (inch) 1 1⁄2  L (mm) 40 Lubrication Wax Material Carbon Steel Ø (mm) 4 Pack Qty 1000 Point Type Single Slash Recess Type Pozi Shank Type Rapid Drive Twist Size (imp.) 8 x 1 1⁄2  Size (mm) 4.0 x 40 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread Coverage Partially Threaded Thread L (mm) 30 Thread Ø (mm) 4 Thread Type Serrated Dual Angle

Read more less

C2 is a revolutionary high-performance screw designed using modern manufacturing methods and an innovative twin-cut point, ensuring consistent and rapid pick-up while reducing timber splitting. Its superior holding strength in a wide variety of materials provides ultimate performance. • Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw• Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage• Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating• Dual angle thread for ultimate performance and exceptionally high pull-out resistance• Patented twin cut technology for rapid "pick-up" and reduces timber splitting• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length Application Joinery, Carpentry, Timber Construction, Furniture Manufacturing Brand TIMCO CE Standard BS EN 14592:2008 Colour Yellow Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 8 Head Ø (mm) 7.7 Head Type Double Countersunk Indoor/Outdoor Usage Indoor, Covered Outdoor Inner Thread Ø d1 (mm) 2.35 L (inch) 2 L (mm) 50 Lubrication Gleitmo Material Hardened Steel Ø (mm) 4 Pack Qty 1000 Point Type Twin-Cut Recess Type Pozi Resistant Type Corrosion-Resistant Size 4.0 x 50 Size (imp.) 8 x 2 Size (mm) 4.0 x 50 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread Coverage Fully Threaded Thread L (mm) 45 Thread Ø (mm) 4 Thread Type 40° Single Deep  

Read more less

A single thread woodscrew mainly used in various types of timber and man-made boards or into masonry with the use of a plastic plug. • Double countersunk reduces the likelihood of head shear and assists completion of countersinking• Wax lubricated to enhance screw insertion time, extra driving torque and resistance to corrosion• 40° deep single thread to provide a secure fixing with high pull-out resistance• 25° sharp point and single lead for a fast start and improved thread acceptance• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length Brand TIMCO CE Standard BS EN 14592:2008 Corrosion Rating (1-5) 1 - Clean, dry & low humidity environments Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 8 Head Ø (mm) 7.62 Head Type Double Countersunk Inner Thread Ø d1 (mm) 2.5 L (inch) 2 L (mm) 50 Lubrication Wax Material Carbon Steel Ø (mm) 4 Pack Qty 1000 Point Type 25° Sharp Recess Type Pozi Size (imp.) 8 x 2 Size (mm) 4.0 x 50 Substrates Softwood, Chipboard, MDF, Masonry (with plug) Thread Coverage Fully Threaded Thread L (mm) 45 Thread Ø (mm) 4 Thread Type 40° Single Deep

Read more less

A single thread woodscrew mainly used in various types of timber and man-made boards or into masonry with the use of a plastic plug. • Double countersunk reduces the likelihood of head shear and assists completion of countersinking• Wax lubricated to enhance screw insertion time, extra driving torque and resistance to corrosion• 40° deep single thread to provide a secure fixing with high pull-out resistance• 25° sharp point and single lead for a fast start and improved thread acceptance• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length Brand TIMCO Corrosion Rating (1-5) 1 - Clean, dry & low humidity environments Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 8 Head Ø (mm) 7.62 Head Type Double Countersunk Inner Thread Ø d1 (mm) 2.5 L (inch) 2 L (mm) 50 Lubrication Wax Material Carbon Steel Pack Qty 800 Point Type 25° Sharp Recess Type Pozi Size (imp.) 8 x 2 Size (mm) 4.0 x 50 Substrates Softwood, Chipboard, MDF, Masonry (with plug) Thread Coverage Fully Threaded Thread L (mm) 45 Thread Ø (mm) 4 Thread Type 40° Single Deep

Read more less

The unique patented Velocity screw has been specifically designed to give rapid installation into many different materials, whilst achieving exceptional pull-out resistance. It has been designed to give the user a consistent and reliable product that can be used in a variety of applications. • Dual angle thread designed for superior hold• Partially threaded stops the timber jacking. NOTE: Partially threaded from 40mm• Rapid drive twist cut enhances drive performance• Slash point tip helps prevent the timber splitting when screwing close to the edge, whilst also helping to reduce torque. NOTE: Slash point from 25mm and above Brand TIMCO CE Standard BS EN 14592:2008 Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 8 Head Ø (mm) 7.71 Head Type Double Countersunk with Ribs Inner Thread Ø d1 (mm) 2.52 L (inch) 2 L (mm) 50 Lubrication Wax Material Carbon Steel Ø (mm) 4 Pack Qty 1000 Point Type Single Slash Recess Type Pozi Shank Type Rapid Drive Twist Size (imp.) 8 x 2 Size (mm) 4.0 x 50 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread Coverage Partially Threaded Thread L (mm) 30 Thread Ø (mm) 4 Thread Type Serrated Dual Angle

Read more less

C2 is a revolutionary high-performance screw designed using modern manufacturing methods and an innovative twin-cut point, ensuring consistent and rapid pick-up while reducing timber splitting. Its superior holding strength in a wide variety of materials provides ultimate performance. • Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw• Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage• Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating• Dual angle thread for ultimate performance and exceptionally high pull-out resistance• Patented twin cut technology for rapid "pick-up" and reduces timber splitting• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length Application Joinery, Carpentry, Timber Construction, Furniture Manufacturing Brand TIMCO CE Standard BS EN 14592:2008 Colour Yellow Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 8 Head Ø (mm) 7.7 Head Type Double Countersunk Indoor/Outdoor Usage Indoor, Covered Outdoor Inner Thread Ø d1 (mm) 2.35 L (inch) 21⁄2 L (mm) 60 Lubrication Gleitmo Material Hardened Steel Ø (mm) 4 Pack Qty 1000 Point Type Twin-Cut Recess Type Pozi Resistant Type Corrosion-Resistant Size 4.0 x 60 Size (imp.) 8 x 21⁄2 Size (mm) 4.0 x 60 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread Coverage Fully Threaded Thread L (mm) 55 Thread Ø (mm) 4 Thread Type 40° Single Deep  

Read more less

A single thread woodscrew mainly used in various types of timber and man-made boards or into masonry with the use of a plastic plug. • Double countersunk reduces the likelihood of head shear and assists completion of countersinking• Wax lubricated to enhance screw insertion time, extra driving torque and resistance to corrosion• 40° deep single thread to provide a secure fixing with high pull-out resistance• 25° sharp point and single lead for a fast start and improved thread acceptance• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length Brand TIMCO CE Standard BS EN 14592:2008 Corrosion Rating (1-5) 1 - Clean, dry & low humidity environments Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 8 Head Ø (mm) 7.62 Head Type Double Countersunk Inner Thread Ø d1 (mm) 2.5 L (inch) 2 1⁄2 L (mm) 60 Lubrication Wax Material Carbon Steel Ø (mm) 4 Pack Qty 1000 Point Type 25° Sharp Recess Type Pozi Size (imp.) 8 x 2 1⁄2 Size (mm) 4.0 x 60 Substrates Softwood, Chipboard, MDF, Masonry (with plug) Thread Coverage Fully Threaded Thread L (mm) 55 Thread Ø (mm) 4 Thread Type 40° Single Deep

Read more less

C2 is a revolutionary high-performance screw designed using modern manufacturing methods and an innovative twin-cut point, ensuring consistent and rapid pick-up while reducing timber splitting. Its superior holding strength in a wide variety of materials provides ultimate performance. • Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw• Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage• Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating• Dual angle thread for ultimate performance and exceptionally high pull-out resistance• Patented twin cut technology for rapid "pick-up" and reduces timber splitting• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length Application Joinery, Carpentry, Timber Construction, Furniture Manufacturing Brand TIMCO CE Standard BS EN 14592:2008 Colour Yellow Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 8 Head Ø (mm) 7.7 Head Type Double Countersunk Indoor/Outdoor Usage Indoor, Covered Outdoor Inner Thread Ø d1 (mm) 2.35 L (inch) 3 L (mm) 80 Lubrication Gleitmo Material Hardened Steel Ø (mm) 4 Pack Qty 1000 Point Type Twin-Cut Recess Type Pozi Resistant Type Corrosion-Resistant Size 4.0 x 80 Size (imp.) 8 x 3 Size (mm) 4.0 x 80 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread Coverage Fully Threaded Thread L (mm) 70 Thread Ø (mm) 4 Thread Type 40° Single Deep  

Read more less

A single thread woodscrew mainly used in various types of timber and man-made boards or into masonry with the use of a plastic plug. • Double countersunk reduces the likelihood of head shear and assists completion of countersinking• Wax lubricated to enhance screw insertion time, extra driving torque and resistance to corrosion• 40° deep single thread to provide a secure fixing with high pull-out resistance• 25° sharp point and single lead for a fast start and improved thread acceptance• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length Brand TIMCO CE Standard BS EN 14592:2008 Corrosion Rating (1-5) 1 - Clean, dry & low humidity environments Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 8 Head Ø (mm) 7.62 Head Type Double Countersunk Inner Thread Ø d1 (mm) 2.5 L (inch) 3 L (mm) 80 Lubrication Wax Material Carbon Steel Ø (mm) 4 Pack Qty 1000 Point Type 25° Sharp Recess Type Pozi Size (imp.) 8 x 3 Size (mm) 4.0 x 80 Substrates Softwood, Chipboard, MDF, Masonry (with plug) Thread Coverage Fully Threaded Thread L (mm) 70 Thread Ø (mm) 4 Thread Type 40° Single Deep

Read more less

An economic but highly effective softwood decking screw. Plated to withstand up to 500 hours in a salt spray cabinet and designed to give a rapid installation and a secure fixing. • Ribs under head for improved countersinking• Helix shank for removing debris and to improve clamping• 25° sharp point and single lead for a fast start and improved thread acceptance Brand TIMCO CE Standard BS EN 14592:2008 Colour Green Corrosion Rating (1-5) 3 - Urban & industrial areas with a low salt atmosphere Driver Bit Size PZ2 Finish Exterior (Green Organic) Gauge 9 Head Ø (mm) 8.76 Head Type Double Countersunk with Ribs Inner Thread Ø d1 (mm) 2.7 L (inch) 2 1⁄2  L (mm) 60 Material Carbon Steel Ø (mm) 4.5 Pack Qty 1000 Point Type 25° Sharp Recess Type Pozi Shank Type Helix Size (imp.) 9 x 2 1⁄2  Size (mm) 4.5 x 60 Substrates Hardwood, Softwood Thread Coverage Partially Threaded Thread L (mm) 42 Thread Ø (mm) 4.5 Thread Type 40° Single Deep

Read more less

The C2 Deck-Fix with a green organic coating ideal for outdoor projects. ?C2 is a revolutionary high-performance screw designed using modern manufacturing methods and an innovative twin-cut point, ensuring consistent and rapid pick-up while reducing timber splitting. Its superior holding strength in a variety of timber providing an ultimate performance. • Strengthened head to prevent shearing when installed with an impact tool.• Ribs under the head for improved countersinking.• Helix shank for removing debris and to improve clamping.• Coated with a patented multi-layer corrosion resistant plating to withstand 1,000 hours salt spray.• Patented twin cut technology for rapid "pick-up" and reduces timber splitting. Application Decking, Landscaping, Outdoor Structures (i.e. Pergolas, Fences, Sheds) Brand TIMCO CE Standard BS EN 14592:2008 Colour Green Corrosion Rating (1-5) 3 - Urban & industrial areas with a low salt atmosphere Driver Bit Size TX20 Driver Bit Type TX Drive Finish Exterior (Green Organic) Gauge 9 Head Ø (mm) 7.98 Head Type Double Countersunk with Ribs Indoor/Outdoor Usage Outdoor Inner Thread Ø d1 (mm) 2.7 L (inch) 2 1⁄2  L (mm) 65 Material Hardened Steel Ø (mm) 4.5 Pack Qty 1000 Point Type Twin-Cut Recess Type TX Drive Resistant Type Corrosion-Resistant Shank Type Helix Size 4.5 x 65 Size (imp.) 9 x 2 1⁄2  Size (mm) 4.5 x 65 Thread Coverage Partially Threaded Thread L (mm) 42 Thread Ø (mm) 4.5 Thread Type 40° Single Deep

Read more less

C2 is a revolutionary high-performance screw designed using modern manufacturing methods and an innovative twin-cut point, ensuring consistent and rapid pick-up while reducing timber splitting. Its superior holding strength in a wide variety of materials provides ultimate performance. • Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw• Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage• Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating• Dual angle thread for ultimate performance and exceptionally high pull-out resistance• Patented twin cut technology for rapid "pick-up" and reduces timber splitting• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length Application Joinery, Carpentry, Timber Construction, Furniture Manufacturing Brand TIMCO CE Standard BS EN 14592:2008 Colour Yellow Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 10 Head Ø (mm) 9.7 Head Type Double Countersunk Indoor/Outdoor Usage Indoor, Covered Outdoor Inner Thread Ø d1 (mm) 2.95 L (inch) 4 L (mm) 100 Lubrication Gleitmo Material Hardened Steel Ø (mm) 5 Pack Qty 1000 Point Type Twin-Cut Recess Type Pozi Resistant Type Corrosion-Resistant Size 5.0 x 100 Size (imp.) 10 x 4 Size (mm) 5.0 x 100 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread Coverage Fully Threaded Thread L (mm) 70 Thread Ø (mm) 5 Thread Type 40° Single Deep  

Read more less

A single thread woodscrew mainly used in various types of timber and man-made boards or into masonry with the use of a plastic plug. • Double countersunk reduces the likelihood of head shear and assists completion of countersinking• Wax lubricated to enhance screw insertion time, extra driving torque and resistance to corrosion• 40° deep single thread to provide a secure fixing with high pull-out resistance• 25° sharp point and single lead for a fast start and improved thread acceptance• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length Brand TIMCO CE Standard BS EN 14592:2008 Corrosion Rating (1-5) 1 - Clean, dry & low humidity environments Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 10 Head Ø (mm) 9.74 Head Type Double Countersunk Inner Thread Ø d1 (mm) 3.1 L (inch) 3 L (mm) 80 Lubrication Wax Material Carbon Steel Ø (mm) 5 Pack Qty 1000 Point Type 25° Sharp Recess Type Pozi Size (imp.) 10 x 3 Size (mm) 5.0 x 80 Substrates Softwood, Chipboard, MDF, Masonry (with plug) Thread Coverage Fully Threaded Thread L (mm) 70 Thread Ø (mm) 5 Thread Type 40° Single Deep

Read more less

A single thread woodscrew mainly used in various types of timber and man-made boards or into masonry with the use of a plastic plug. • Double countersunk reduces the likelihood of head shear and assists completion of countersinking• Wax lubricated to enhance screw insertion time, extra driving torque and resistance to corrosion• 40° deep single thread to provide a secure fixing with high pull-out resistance• 25° sharp point and single lead for a fast start and improved thread acceptance• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length Brand TIMCO Corrosion Rating (1-5) 1 - Clean, dry & low humidity environments Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 10 Head Ø (mm) 9.74 Head Type Double Countersunk Inner Thread Ø d1 (mm) 3.1 L (inch) 4 L (mm) 100 Lubrication Wax Material Carbon Steel Pack Qty 250 Point Type 25° Sharp Recess Type Pozi Size (imp.) 10 x 4 Size (mm) 5.0 x 100 Substrates Softwood, Chipboard, MDF, Masonry (with plug) Thread Coverage Partially Threaded Thread L (mm) 70 Thread Ø (mm) 5 Thread Type 40° Single Deep

Read more less

The unique patented Velocity screw has been specifically designed to give rapid installation into many different materials, whilst achieving exceptional pull-out resistance. It has been designed to give the user a consistent and reliable product that can be used in a variety of applications. • Dual angle thread designed for superior hold• Partially threaded stops the timber jacking. NOTE: Partially threaded from 40mm• Rapid drive twist cut enhances drive performance• Slash point tip helps prevent the timber splitting when screwing close to the edge, whilst also helping to reduce torque. NOTE: Slash point from 25mm and above Brand TIMCO CE Standard BS EN 14592:2008 Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 10 Head Ø (mm) 9.68 Head Type Double Countersunk with Ribs Inner Thread Ø d1 (mm) 3.12 L (inch) 4 L (mm) 100 Lubrication Wax Material Carbon Steel Ø (mm) 5 Pack Qty 1000 Point Type Single Slash Recess Type Pozi Shank Type Rapid Drive Twist Size (imp.) 10 x 4 Size (mm) 5.0 x 100 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread Coverage Partially Threaded Thread L (mm) 70 Thread Ø (mm) 5 Thread Type Serrated Dual Angle

Read more less

The unique patented Velocity screw has been specifically designed to give rapid installation into many different materials, whilst achieving exceptional pull-out resistance. It has been designed to give the user a consistent and reliable product that can be used in a variety of applications. • Dual angle thread designed for superior hold• Partially threaded stops the timber jacking. NOTE: Partially threaded from 40mm• Rapid drive twist cut enhances drive performance• Slash point tip helps prevent the timber splitting when screwing close to the edge, whilst also helping to reduce torque. NOTE: Slash point from 25mm and above Brand TIMCO CE Standard BS EN 14592:2008 Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 10 Head Ø (mm) 9.68 Head Type Double Countersunk with Ribs Inner Thread Ø d1 (mm) 3.12 L (inch) 1 1⁄2 L (mm) 40 Lubrication Wax Material Carbon Steel Ø (mm) 5 Pack Qty 1000 Point Type Single Slash Recess Type Pozi Shank Type Rapid Drive Twist Size (imp.) 10 x 1 1⁄2 Size (mm) 5.0 x 40 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread Coverage Partially Threaded Thread L (mm) 30 Thread Ø (mm) 5 Thread Type Serrated Dual Angle

Read more less

C2 is a revolutionary high-performance screw designed using modern manufacturing methods and an innovative twin-cut point, ensuring consistent and rapid pick-up while reducing timber splitting. Its superior holding strength in a wide variety of materials provides ultimate performance. • Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw• Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage• Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating• Dual angle thread for ultimate performance and exceptionally high pull-out resistance• Patented twin cut technology for rapid "pick-up" and reduces timber splitting• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length Application Joinery, Carpentry, Timber Construction, Furniture Manufacturing Brand TIMCO CE Standard BS EN 14592:2008 Colour Yellow Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 10 Head Ø (mm) 9.7 Head Type Double Countersunk Indoor/Outdoor Usage Indoor, Covered Outdoor Inner Thread Ø d1 (mm) 2.95 L (inch) 2 L (mm) 50 Lubrication Gleitmo Material Hardened Steel Ø (mm) 5 Pack Qty 1000 Point Type Twin-Cut Recess Type Pozi Resistant Type Corrosion-Resistant Size 5.0 x 50 Size (imp.) 10 x 2 Size (mm) 5.0 x 50 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread Coverage Fully Threaded Thread L (mm) 45 Thread Ø (mm) 5 Thread Type 40° Single Deep  

Read more less

A single thread woodscrew mainly used in various types of timber and man-made boards or into masonry with the use of a plastic plug. • Double countersunk reduces the likelihood of head shear and assists completion of countersinking• Wax lubricated to enhance screw insertion time, extra driving torque and resistance to corrosion• 40° deep single thread to provide a secure fixing with high pull-out resistance• 25° sharp point and single lead for a fast start and improved thread acceptance• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length Brand TIMCO CE Standard BS EN 14592:2008 Corrosion Rating (1-5) 1 - Clean, dry & low humidity environments Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 10 Head Ø (mm) 9.74 Head Type Double Countersunk Inner Thread Ø d1 (mm) 3.1 L (inch) 2 L (mm) 50 Lubrication Wax Material Carbon Steel Ø (mm) 5 Pack Qty 1000 Point Type 25° Sharp Recess Type Pozi Size (imp.) 10 x 2 Size (mm) 5.0 x 50 Substrates Softwood, Chipboard, MDF, Masonry (with plug) Thread Coverage Fully Threaded Thread L (mm) 45 Thread Ø (mm) 5 Thread Type 40° Single Deep

Read more less

A single thread woodscrew mainly used in various types of timber and man-made boards or into masonry with the use of a plastic plug. • Double countersunk reduces the likelihood of head shear and assists completion of countersinking• Wax lubricated to enhance screw insertion time, extra driving torque and resistance to corrosion• 40° deep single thread to provide a secure fixing with high pull-out resistance• 25° sharp point and single lead for a fast start and improved thread acceptance• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length Brand TIMCO Corrosion Rating (1-5) 1 - Clean, dry & low humidity environments Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 10 Head Ø (mm) 9.74 Head Type Double Countersunk Inner Thread Ø d1 (mm) 3.1 L (inch) 2 L (mm) 50 Lubrication Wax Material Carbon Steel Pack Qty 525 Point Type 25° Sharp Recess Type Pozi Size (imp.) 10 x 2 Size (mm) 5.0 x 50 Substrates Softwood, Chipboard, MDF, Masonry (with plug) Thread Coverage Fully Threaded Thread L (mm) 45 Thread Ø (mm) 5 Thread Type 40° Single Deep

Read more less

The unique patented Velocity screw has been specifically designed to give rapid installation into many different materials, whilst achieving exceptional pull-out resistance. It has been designed to give the user a consistent and reliable product that can be used in a variety of applications. • Dual angle thread designed for superior hold• Partially threaded stops the timber jacking. NOTE: Partially threaded from 40mm• Rapid drive twist cut enhances drive performance• Slash point tip helps prevent the timber splitting when screwing close to the edge, whilst also helping to reduce torque. NOTE: Slash point from 25mm and above Brand TIMCO CE Standard BS EN 14592:2008 Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 10 Head Ø (mm) 9.68 Head Type Double Countersunk with Ribs Inner Thread Ø d1 (mm) 3.12 L (inch) 2 L (mm) 50 Lubrication Wax Material Carbon Steel Ø (mm) 5 Pack Qty 1000 Point Type Single Slash Recess Type Pozi Shank Type Rapid Drive Twist Size (imp.) 10 x 2 Size (mm) 5.0 x 50 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread Coverage Partially Threaded Thread L (mm) 30 Thread Ø (mm) 5 Thread Type Serrated Dual Angle

Read more less

C2 is a revolutionary high-performance screw designed using modern manufacturing methods and an innovative twin-cut point, ensuring consistent and rapid pick-up while reducing timber splitting. Its superior holding strength in a wide variety of materials provides ultimate performance. • Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw• Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage• Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating• Dual angle thread for ultimate performance and exceptionally high pull-out resistance• Patented twin cut technology for rapid "pick-up" and reduces timber splitting• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length Application Joinery, Carpentry, Timber Construction, Furniture Manufacturing Brand TIMCO CE Standard BS EN 14592:2008 Colour Yellow Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 10 Head Ø (mm) 9.7 Head Type Double Countersunk Indoor/Outdoor Usage Indoor, Covered Outdoor Inner Thread Ø d1 (mm) 2.95 L (inch) 2 1⁄2 L (mm) 60 Lubrication Gleitmo Material Hardened Steel Ø (mm) 5 Pack Qty 1000 Point Type Twin-Cut Recess Type Pozi Resistant Type Corrosion-Resistant Size 5.0 x 60 Size (imp.) 10 x 2 1⁄2 Size (mm) 5.0 x 60 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread Coverage Fully Threaded Thread L (mm) 55 Thread Ø (mm) 5 Thread Type 40° Single Deep  

Read more less

A single thread woodscrew mainly used in various types of timber and man-made boards or into masonry with the use of a plastic plug. • Double countersunk reduces the likelihood of head shear and assists completion of countersinking• Wax lubricated to enhance screw insertion time, extra driving torque and resistance to corrosion• 40° deep single thread to provide a secure fixing with high pull-out resistance• 25° sharp point and single lead for a fast start and improved thread acceptance• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length Brand TIMCO Corrosion Rating (1-5) 1 - Clean, dry & low humidity environments Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 10 Head Ø (mm) 9.74 Head Type Double Countersunk Inner Thread Ø d1 (mm) 3.1 L (inch) 2 1/2 L (mm) 60 Lubrication Wax Material Carbon Steel Pack Qty 400 Point Type 25° Sharp Recess Type Pozi Size (imp.) 10 x 2 1/2 Size (mm) 5.0 x 60 Substrates Softwood, Chipboard, MDF, Masonry (with plug) Thread Coverage Fully Threaded Thread L (mm) 55 Thread Ø (mm) 5 Thread Type 40° Single Deep

Read more less

The unique patented Velocity screw has been specifically designed to give rapid installation into many different materials, whilst achieving exceptional pull-out resistance. It has been designed to give the user a consistent and reliable product that can be used in a variety of applications. • Dual angle thread designed for superior hold• Partially threaded stops the timber jacking. NOTE: Partially threaded from 40mm• Rapid drive twist cut enhances drive performance• Slash point tip helps prevent the timber splitting when screwing close to the edge, whilst also helping to reduce torque. NOTE: Slash point from 25mm and above Brand TIMCO CE Standard BS EN 14592:2008 Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 10 Head Ø (mm) 9.68 Head Type Double Countersunk with Ribs Inner Thread Ø d1 (mm) 3.12 L (inch) 2 1⁄2  L (mm) 60 Lubrication Wax Material Carbon Steel Ø (mm) 5 Pack Qty 1000 Point Type Single Slash Recess Type Pozi Shank Type Rapid Drive Twist Size (imp.) 10 x 2 1⁄2  Size (mm) 5.0 x 60 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread Coverage Partially Threaded Thread L (mm) 40 Thread Ø (mm) 5 Thread Type Serrated Dual Angle

Read more less

C2 is a revolutionary high-performance screw designed using modern manufacturing methods and an innovative twin-cut point, ensuring consistent and rapid pick-up while reducing timber splitting. Its superior holding strength in a wide variety of materials provides ultimate performance. • Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw• Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage• Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating• Dual angle thread for ultimate performance and exceptionally high pull-out resistance• Patented twin cut technology for rapid "pick-up" and reduces timber splitting• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length Application Joinery, Carpentry, Timber Construction, Furniture Manufacturing Brand TIMCO CE Standard BS EN 14592:2008 Colour Yellow Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 10 Head Ø (mm) 9.7 Head Type Double Countersunk Indoor/Outdoor Usage Indoor, Covered Outdoor Inner Thread Ø d1 (mm) 2.95 L (inch) 2 3⁄4 L (mm) 70 Lubrication Gleitmo Material Hardened Steel Ø (mm) 5 Pack Qty 1000 Point Type Twin-Cut Recess Type Pozi Resistant Type Corrosion-Resistant Size 5.0 x 70 Size (imp.) 10 x 2 3⁄4 Size (mm) 5.0 x 70 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread Coverage Fully Threaded Thread L (mm) 65 Thread Ø (mm) 5 Thread Type 40° Single Deep  

Read more less

A single thread woodscrew mainly used in various types of timber and man-made boards or into masonry with the use of a plastic plug. • Double countersunk reduces the likelihood of head shear and assists completion of countersinking• Wax lubricated to enhance screw insertion time, extra driving torque and resistance to corrosion• 40° deep single thread to provide a secure fixing with high pull-out resistance• 25° sharp point and single lead for a fast start and improved thread acceptance• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length Brand TIMCO Corrosion Rating (1-5) 1 - Clean, dry & low humidity environments Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 10 Head Ø (mm) 9.74 Head Type Double Countersunk Inner Thread Ø d1 (mm) 3.1 L (inch) 2 3/4 L (mm) 70 Lubrication Wax Material Carbon Steel Pack Qty 375 Point Type 25° Sharp Recess Type Pozi Size (imp.) 10 x 2 3/4 Size (mm) 5.0 x 70 Substrates Softwood, Chipboard, MDF, Masonry (with plug) Thread Coverage Fully Threaded Thread L (mm) 65 Thread Ø (mm) 5 Thread Type 40° Single Deep

Read more less

The unique patented Velocity screw has been specifically designed to give rapid installation into many different materials, whilst achieving exceptional pull-out resistance. It has been designed to give the user a consistent and reliable product that can be used in a variety of applications. • Dual angle thread designed for superior hold• Partially threaded stops the timber jacking. NOTE: Partially threaded from 40mm• Rapid drive twist cut enhances drive performance• Slash point tip helps prevent the timber splitting when screwing close to the edge, whilst also helping to reduce torque. NOTE: Slash point from 25mm and above Brand TIMCO CE Standard BS EN 14592:2008 Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 10 Head Ø (mm) 9.68 Head Type Double Countersunk with Ribs Inner Thread Ø d1 (mm) 3.12 L (inch) 2 3⁄4 L (mm) 70 Lubrication Wax Material Carbon Steel Ø (mm) 5 Pack Qty 1000 Point Type Single Slash Recess Type Pozi Shank Type Rapid Drive Twist Size (imp.) 10 x 2 3⁄4  Size (mm) 5.0 x 70 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread Coverage Partially Threaded Thread L (mm) 40 Thread Ø (mm) 5 Thread Type Serrated Dual Angle

Read more less

C2 is a revolutionary high-performance screw designed using modern manufacturing methods and an innovative twin-cut point, ensuring consistent and rapid pick-up while reducing timber splitting. Its superior holding strength in a wide variety of materials provides ultimate performance. • Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw• Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage• Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating• Dual angle thread for ultimate performance and exceptionally high pull-out resistance• Patented twin cut technology for rapid "pick-up" and reduces timber splitting• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length Application Joinery, Carpentry, Timber Construction, Furniture Manufacturing Brand TIMCO CE Standard BS EN 14592:2008 Colour Yellow Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 10 Head Ø (mm) 9.7 Head Type Double Countersunk Indoor/Outdoor Usage Indoor, Covered Outdoor Inner Thread Ø d1 (mm) 2.95 L (inch) 3 L (mm) 80 Lubrication Gleitmo Material Hardened Steel Ø (mm) 5 Pack Qty 1000 Point Type Twin-Cut Recess Type Pozi Resistant Type Corrosion-Resistant Size 5.0 x 80 Size (imp.) 10 x 3 Size (mm) 5.0 x 80 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread Coverage Fully Threaded Thread L (mm) 70 Thread Ø (mm) 5 Thread Type 40° Single Deep  

Read more less

A single thread woodscrew mainly used in various types of timber and man-made boards or into masonry with the use of a plastic plug. • Double countersunk reduces the likelihood of head shear and assists completion of countersinking• Wax lubricated to enhance screw insertion time, extra driving torque and resistance to corrosion• 40° deep single thread to provide a secure fixing with high pull-out resistance• 25° sharp point and single lead for a fast start and improved thread acceptance• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length Brand TIMCO CE Standard BS EN 14592:2008 Corrosion Rating (1-5) 1 - Clean, dry & low humidity environments Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 10 Head Ø (mm) 9.74 Head Type Double Countersunk Inner Thread Ø d1 (mm) 3.1 L (inch) 3 L (mm) 80 Lubrication Wax Material Carbon Steel Ø (mm) 5 Pack Qty 1000 Point Type 25° Sharp Recess Type Pozi Size (imp.) 10 x 3 Size (mm) 5.0 x 80 Substrates Softwood, Chipboard, MDF, Masonry (with plug) Thread Coverage Fully Threaded Thread L (mm) 70 Thread Ø (mm) 5 Thread Type 40° Single Deep

Read more less

A single thread woodscrew mainly used in various types of timber and man-made boards or into masonry with the use of a plastic plug. • Double countersunk reduces the likelihood of head shear and assists completion of countersinking• Wax lubricated to enhance screw insertion time, extra driving torque and resistance to corrosion• 40° deep single thread to provide a secure fixing with high pull-out resistance• 25° sharp point and single lead for a fast start and improved thread acceptance• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length Brand TIMCO Corrosion Rating (1-5) 1 - Clean, dry & low humidity environments Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 10 Head Ø (mm) 9.74 Head Type Double Countersunk Inner Thread Ø d1 (mm) 3.1 L (inch) 2 3/4 L (mm) 70 Lubrication Wax Material Carbon Steel Pack Qty 325 Point Type 25° Sharp Recess Type Pozi Size (imp.) 10 x 3 Size (mm) 5.0 x 80 Substrates Softwood, Chipboard, MDF, Masonry (with plug) Thread Coverage Fully Threaded Thread L (mm) 70 Thread Ø (mm) 5 Thread Type 40° Single Deep

Read more less

The unique patented Velocity screw has been specifically designed to give rapid installation into many different materials, whilst achieving exceptional pull-out resistance. It has been designed to give the user a consistent and reliable product that can be used in a variety of applications. • Dual angle thread designed for superior hold• Partially threaded stops the timber jacking. NOTE: Partially threaded from 40mm• Rapid drive twist cut enhances drive performance• Slash point tip helps prevent the timber splitting when screwing close to the edge, whilst also helping to reduce torque. NOTE: Slash point from 25mm and above Brand TIMCO CE Standard BS EN 14592:2008 Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 10 Head Ø (mm) 9.68 Head Type Double Countersunk with Ribs Inner Thread Ø d1 (mm) 3.12 L (inch) 3 L (mm) 80 Lubrication Wax Material Carbon Steel Ø (mm) 5 Pack Qty 1000 Point Type Single Slash Recess Type Pozi Shank Type Rapid Drive Twist Size (imp.) 10 x 3  Size (mm) 5.0 x 80 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread Coverage Partially Threaded Thread L (mm) 50 Thread Ø (mm) 5 Thread Type Serrated Dual Angle

Read more less

The unique patented Velocity screw has been specifically designed to give rapid installation into many different materials, whilst achieving exceptional pull-out resistance. It has been designed to give the user a consistent and reliable product that can be used in a variety of applications. • Dual angle thread designed for superior hold• Partially threaded stops the timber jacking. NOTE: Partially threaded from 40mm• Rapid drive twist cut enhances drive performance• Slash point tip helps prevent the timber splitting when screwing close to the edge, whilst also helping to reduce torque. NOTE: Slash point from 25mm and above Brand TIMCO CE Standard BS EN 14592:2008 Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 10 Head Ø (mm) 9.68 Head Type Double Countersunk with Ribs Inner Thread Ø d1 (mm) 3.12 L (inch) 3 1⁄2 L (mm) 90 Lubrication Wax Material Carbon Steel Ø (mm) 5 Pack Qty 1000 Point Type Single Slash Recess Type Pozi Shank Type Rapid Drive Twist Size (imp.) 10 x 3 1⁄2  Size (mm) 5.0 x 90 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread Coverage Partially Threaded Thread L (mm) 60 Thread Ø (mm) 5 Thread Type Serrated Dual Angle

Read more less

The silver organic coated C2 Exterior Strong-Fix provides exceptional corrosion resistance for use in harsh environments. ?C2 is a revolutionary high-performance screw designed using modern manufacturing methods and an innovative twin-cut point, ensuring consistent and rapid pick-up while reducing timber splitting. Its superior holding strength in a wide variety of materials provides ultimate performance. • Patented twin cut technology for rapid "pick-up" and reduces timber splitting• Multi-layer coating consisting of organic top coat barrier and a zinc base layer• Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw • Patented twin cut technology for rapid "pick-up" and reduces timber splitting• Multi-layer coating consisting of organic top coat barrier and a zinc base layer• Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw Application Decking, Landscaping, Outdoor Structures (i.e. Pergolas, Fences, Sheds), General External Applications, External Ironmongery CE Standard BS EN 14592:2008 Contents 4.0 x 30mm (Qty 140) 4.0 x 40mm (Qty 100) 4.0 x 50mm (Qty 70) 4.0 x 60mm (Qty 60) 5.0 x 40mm (Qty 80) 5.0 x 50mm (Qty 55) 5.0 x 60mm (Qty 45) 5.0 x 70mm (Qty 30) 5.0 x 80mm (Qty 20) PZ2 38mm Power Bit (Qty 1) Corrosion Rating (1-5) 3 - Urban & industrial areas with a low salt atmosphere Driver Bit Size PZ2 Finish Exterior (Silver Organic) Head Type Double Countersunk with Ribs Included Items PZ2 38mm Impact Power Bit (Qty 1) Indoor/Outdoor Usage Outdoor Material Hardened Steel Pack Qty 600 Point Type Twin-Cut Recess Type Pozi Resistant Type Corrosion-Resistant Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal

Read more less

C2 is a revolutionary high-performance screw designed using modern manufacturing methods and an innovative twin-cut point, ensuring consistent and rapid pick-up while reducing timber splitting. Its superior holding strength in a wide variety of materials provides ultimate performance. This convenient grab pack includes 9 popular sizes for easy selection and organization, plus an impact power bit. • Patented twin cut technology for rapid "pick-up" and reduces timber splitting• Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating• Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw Application Joinery, Carpentry, Timber Construction, Furniture Manufacturing Brand TIMCO CE Standard BS EN 14592:2008 Contents 4.0 x 30mm (Qty 140) 4.0 x 40mm (Qty 100) 4.0 x 50mm (Qty 70) 4.0x 60mm (Qty 60) 5.0 x 40mm (Qty 80) 5.0 x 50mm (Qty 55) 5.0 x 60mm (Qty 45) 5.0 x 70mm (Qty 30) 5.0 x 80mm (Qty 20) PZ2 38mm Power Bit (Qty 1) Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ2 Finish Zinc & Yellow Head Type Double Countersunk Included Items PZ2 38mm Impact Power Bit (Qty 1) Indoor/Outdoor Usage Indoor, Covered Outdoor Lubrication Gleitmo Material Hardened Steel Pack Qty 600 Pack Type Tray Point Type Twin-Cut Recess Type Pozi Resistant Type Corrosion-Resistant Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal

Read more less

C2 is a revolutionary high-performance screw designed using modern manufacturing methods and an innovative twin-cut point, ensuring consistent and rapid pick-up while reducing timber splitting. Its superior holding strength in a wide variety of materials provides ultimate performance. Available in a convenient trade case for easy storage and organization. Containing a variety of popular screw sizes and impact driver bits. • Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw• Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage• Dual angle thread for ultimate performance and exceptionally high pull-out resistance• Patented twin cut technology for rapid "pick-up" and reduces timber splitting• Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length • Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw• Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage• Dual angle thread for ultimate performance and exceptionally high pull-out resistance• Patented twin cut technology for rapid "pick-up" and reduces timber splitting• Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length 3.5 x 16 - 480 quantity3.5 x 25 - 4350quantity4.0 x 30 - 250 quantity4.0 x 40 - 350 quantity4.0 x 50 - 100 quantity5.0 x 60 - 65 quantity5.0 x 70 - 55 quantity5.0 x 80 - 100 quantity5.0 x 100 - 45 quantity38mm Power Bits - 3 quantity Driver Bit Size PZ2 Finish Zinc & Yellow Head Type Double Countersunk Material Hardened Steel Recess Type Pozi Tray Quantity 1798

Read more less

A selection of commonly used zinc plated bolts, nuts and washers in a handy and reusable storage pack with clip-shut lid. Contents Hex Nuts (DIN 934): M6 (Qty 75), M8 (Qty 30), M10 (Qty 20) Form A Washers (DIN 125A): M6 (Qty 150), M8 (Qty 60), M10 (Qty 50) Set Screws (DIN 933): M6 x 16 (Qty 30), M6 x 20 (Qty 20), M6 x 25 (Qty 20), M8 x 30 (Qty 10), M8 x 40 (Qty 10), M8 x 50 (Qty 5), M10 x 60 (Qty 10), M10 x 70 (Qty 6), M10 x 75 (Qty 4) Corrosion Rating (1-5) 1 - Clean, dry & low humidity environments DIN DIN 125-A, DIN 933, DIN 934 Material Carbon Steel Pack Qty 500

Read more less

A selection of commonly used zinc plated carriage bolts, nuts and washers of various sizes in a handy and reusable storage pack with clip-shut lid. Contents Carriage Bolts (DIN 603): M6 x 40 (Qty 10), M8 x 50 (Qty 10), M8 x 75 (Qty 5), M10 x 100 (Qty 5), M10 x 120 (Qty 5), M10 x 150 (Qty 5) Nylon Nuts Type T (DIN 985): M6 (Qty 10), M8 (Qty 15), M10 (Qty 15) Form A Washers (DIN 125A): M6 (Qty 15), M8 (Qty 25), M10 (Qty 20) Corrosion Rating (1-5) 1 - Clean, dry & low humidity environments DIN DIN 125-A, DIN 603, DIN 985 Finish Zinc Material Carbon Steel Pack Qty 140

Read more less

A selection of commonly used zinc plated nuts in a handy and reusable storage pack with clip-shut lid. Contents Hex Nuts (DIN 934): M4 (Qty 150), M5 (Qty 110), M6 (Qty 100), M8 (Qty 90), M10 (Qty 40), M12 (Qty 30) Nylon Nuts Type T (DIN 985): M4 (Qty 150), M5 (Qty 110), M6 (Qty 80), M8 (Qty 40), M10 (Qty 15), M12 (Qty 10) Wing Nuts: M6 (Qty 30), M8 (Qty 15), M10 (Qty 10) Corrosion Rating (1-5) 1 - Clean, dry & low humidity environments DIN DIN 934, DIN 985 Finish Zinc Material Carbon Steel Pack Qty 980

Read more less

A selection of commonly used zinc plated washers in a handy and reusable storage pack with clip-shut lid. Contents Form A Washers (DIN125A): M4 (Qty 120), M5 (Qty 100), M6 (Qty 75), M8 (Qty 60), M10 (Qty 50), M12 (Qty 20) Penny/Repair Washers: M4 x 20 (Qty 50), M5 x 25 (Qty 30), M6 x 20 (Qty 30), M8 x 25 (Qty 20), M10 x 25 (Qty 20), M12 x 35 (Qty 20) Spring Washers (DIN 7980): M4 (Qty 100), M5 (Qty 100), M6 (Qty 75), M8 (Qty 60), M10 (Qty 50), M12 (Qty 20) Corrosion Rating (1-5) 1 - Clean, dry & low humidity environments DIN DIN 125-A, DIN 9054, DIN 7980 Finish Zinc Material Carbon Steel Pack Qty 1000

Read more less

The 2115 piece SSC1 Crate Mate case complete with 14 sizes of Reisser Cutter Screw. This set is an ideal addition to any work van, garage or workshop. Ensure you have the most commonly used sizes of woodscrew to hand at all times. CUTTER Woodscrews are on the forefront of technological innovations in the industry. Designed with performance and perfect finish in mind for all wood applications. Able to work closer to the edge of the work piece without causing splitting thanks to the two patented slots on 25mm and above screws. Each screw features a deep pozi drive head to reduce cam out and keep you working efficiently. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole. Supplied in a stackable Crate Mate case which as well as being tough, waterproof and robust has a unique handle design which distributes weight more evenly, providing comfort. Supplied with 2115 various size screws from 25 - 100mm in length. ● 3.5 x 16mm High Performance Cutter Woodscrew - 200 pieces● 3.5 x 20mm High Performance Cutter Woodscrew - 200 pieces● 3.5 x 30mm High Performance Cutter Woodscrew - 200 pieces● 3.5 x 40mm High Performance Cutter Woodscrew - 130 pieces● 3.5 x 50mm High Performance Cutter Woodscrew - 200 pieces● 4.0 x 25mm High Performance Cutter Woodscrew - 200 pieces● 4.0 x 30mm High Performance Cutter Woodscrew - 200 pieces● 4.0 x 40mm High Performance Cutter Woodscrews - 200 pieces● 4.0 x 50mm High Performance Cutter Woodscrew - 150 pieces● 5.0 x 50mm High Performance Cutter Woodscrew - 100 pieces● 5.0 x 60mm High Performance Cutter Woodscrew - 100 pieces● 5.0 x 70mm High Performance Cutter Woodscrew - 80 pieces● 5.0 x 80mm High Performance Cutter Woodscrew - 80 pieces● 5.0 x 100mm High Performance Cutter Woodscrew - 75 pieces● 1x SSC1 Crate Mate Case

Read more less

A single thread woodscrew mainly used in various types of timber and man-made boards or into masonry with the use of a plastic plug. NOTE: Partially threaded from 80mm. Brand TIMCO CE Standard BS EN 14592:2008 Contents 3.5 x 16mm (Qty 150) 3.5 x 20mm (Qty 130) 3.5 x 25mm (Qty 220) 4.0 x 30mm (Qty 350) 4.0 x 40mm (Qty 120) 4.0 x 50mm (Qty 80) 5.0 x 50mm (Qty 65) 5.0 x 60mm (Qty 55) 5.0 x 80mm (Qty 30) Corrosion Rating (1-5) 1 - Clean, dry & low humidity environments Driver Bit Size PZ2 Finish Zinc & Yellow Head Type Double Countersunk L (mm) Assorted Lubrication Wax Material Carbon Steel Ø (mm) Assorted Pack Qty 1200 Point Type 25° Sharp Recess Type Pozi Substrates Softwood, Chipboard, MDF, Masonry (with plug) Thread L (mm) Assorted Thread Ø (mm) Assorted Thread Type 40° Single Deep

Read more less