The unique patented Velocity screw has been specifically designed to give rapid installation into many different materials, whilst achieving exceptional pull-out resistance. It has been designed to give the user a consistent and reliable product that can be used in a variety of applications. • Dual angle thread designed for superior hold• Partially threaded stops the timber jacking. NOTE: Partially threaded from 40mm• Rapid drive twist cut enhances drive performance• Slash point tip helps prevent the timber splitting when screwing close to the edge, whilst also helping to reduce torque. NOTE: Slash point from 25mm and above Brand TIMCO CE Standard BS EN 14592:2008 Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 8 Head Ø (mm) 7.71 Head Type Double Countersunk with Ribs Inner Thread Ø d1 (mm) 2.52 L (inch) 1 1⁄4 L (mm) 30 Lubrication Wax Material Carbon Steel Ø (mm) 4 Pack Qty 1000 Point Type Single Slash Recess Type Pozi Shank Type Rapid Drive Twist Size (imp.) 8 x 1 1⁄4 Size (mm) 4.0 x 30 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread Coverage Fully Threaded Thread L (mm) 30 Thread Ø (mm) 4 Thread Type Serrated Dual Angle
£12.99
The unique patented Velocity screw has been specifically designed to give rapid installation into many different materials, whilst achieving exceptional pull-out resistance. It has been designed to give the user a consistent and reliable product that can be used in a variety of applications. • Dual angle thread designed for superior hold• Partially threaded stops the timber jacking. NOTE: Partially threaded from 40mm• Rapid drive twist cut enhances drive performance• Slash point tip helps prevent the timber splitting when screwing close to the edge, whilst also helping to reduce torque. NOTE: Slash point from 25mm and above Brand TIMCO CE Standard BS EN 14592:2008 Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 8 Head Ø (mm) 7.71 Head Type Double Countersunk with Ribs Inner Thread Ø d1 (mm) 2.52 L (inch) 1 1⁄2 L (mm) 40 Lubrication Wax Material Carbon Steel Ø (mm) 4 Pack Qty 1000 Point Type Single Slash Recess Type Pozi Shank Type Rapid Drive Twist Size (imp.) 8 x 1 1⁄2 Size (mm) 4.0 x 40 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread Coverage Partially Threaded Thread L (mm) 30 Thread Ø (mm) 4 Thread Type Serrated Dual Angle
£15.99
The unique patented Velocity screw has been specifically designed to give rapid installation into many different materials, whilst achieving exceptional pull-out resistance. It has been designed to give the user a consistent and reliable product that can be used in a variety of applications. • Dual angle thread designed for superior hold• Partially threaded stops the timber jacking. NOTE: Partially threaded from 40mm• Rapid drive twist cut enhances drive performance• Slash point tip helps prevent the timber splitting when screwing close to the edge, whilst also helping to reduce torque. NOTE: Slash point from 25mm and above Brand TIMCO CE Standard BS EN 14592:2008 Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 8 Head Ø (mm) 7.71 Head Type Double Countersunk with Ribs Inner Thread Ø d1 (mm) 2.52 L (inch) 2 L (mm) 50 Lubrication Wax Material Carbon Steel Ø (mm) 4 Pack Qty 1000 Point Type Single Slash Recess Type Pozi Shank Type Rapid Drive Twist Size (imp.) 8 x 2 Size (mm) 4.0 x 50 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread Coverage Partially Threaded Thread L (mm) 30 Thread Ø (mm) 4 Thread Type Serrated Dual Angle
£18.99
The unique patented Velocity screw has been specifically designed to give rapid installation into many different materials, whilst achieving exceptional pull-out resistance. It has been designed to give the user a consistent and reliable product that can be used in a variety of applications. • Dual angle thread designed for superior hold• Partially threaded stops the timber jacking. NOTE: Partially threaded from 40mm• Rapid drive twist cut enhances drive performance• Slash point tip helps prevent the timber splitting when screwing close to the edge, whilst also helping to reduce torque. NOTE: Slash point from 25mm and above Brand TIMCO CE Standard BS EN 14592:2008 Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 10 Head Ø (mm) 9.68 Head Type Double Countersunk with Ribs Inner Thread Ø d1 (mm) 3.12 L (inch) 4 L (mm) 100 Lubrication Wax Material Carbon Steel Ø (mm) 5 Pack Qty 1000 Point Type Single Slash Recess Type Pozi Shank Type Rapid Drive Twist Size (imp.) 10 x 4 Size (mm) 5.0 x 100 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread Coverage Partially Threaded Thread L (mm) 70 Thread Ø (mm) 5 Thread Type Serrated Dual Angle
£58.99
The unique patented Velocity screw has been specifically designed to give rapid installation into many different materials, whilst achieving exceptional pull-out resistance. It has been designed to give the user a consistent and reliable product that can be used in a variety of applications. • Dual angle thread designed for superior hold• Partially threaded stops the timber jacking. NOTE: Partially threaded from 40mm• Rapid drive twist cut enhances drive performance• Slash point tip helps prevent the timber splitting when screwing close to the edge, whilst also helping to reduce torque. NOTE: Slash point from 25mm and above Brand TIMCO CE Standard BS EN 14592:2008 Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 10 Head Ø (mm) 9.68 Head Type Double Countersunk with Ribs Inner Thread Ø d1 (mm) 3.12 L (inch) 1 1⁄2 L (mm) 40 Lubrication Wax Material Carbon Steel Ø (mm) 5 Pack Qty 1000 Point Type Single Slash Recess Type Pozi Shank Type Rapid Drive Twist Size (imp.) 10 x 1 1⁄2 Size (mm) 5.0 x 40 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread Coverage Partially Threaded Thread L (mm) 30 Thread Ø (mm) 5 Thread Type Serrated Dual Angle
£24.99
The unique patented Velocity screw has been specifically designed to give rapid installation into many different materials, whilst achieving exceptional pull-out resistance. It has been designed to give the user a consistent and reliable product that can be used in a variety of applications. • Dual angle thread designed for superior hold• Partially threaded stops the timber jacking. NOTE: Partially threaded from 40mm• Rapid drive twist cut enhances drive performance• Slash point tip helps prevent the timber splitting when screwing close to the edge, whilst also helping to reduce torque. NOTE: Slash point from 25mm and above Brand TIMCO CE Standard BS EN 14592:2008 Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 10 Head Ø (mm) 9.68 Head Type Double Countersunk with Ribs Inner Thread Ø d1 (mm) 3.12 L (inch) 2 L (mm) 50 Lubrication Wax Material Carbon Steel Ø (mm) 5 Pack Qty 1000 Point Type Single Slash Recess Type Pozi Shank Type Rapid Drive Twist Size (imp.) 10 x 2 Size (mm) 5.0 x 50 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread Coverage Partially Threaded Thread L (mm) 30 Thread Ø (mm) 5 Thread Type Serrated Dual Angle
£29.99
The unique patented Velocity screw has been specifically designed to give rapid installation into many different materials, whilst achieving exceptional pull-out resistance. It has been designed to give the user a consistent and reliable product that can be used in a variety of applications. • Dual angle thread designed for superior hold• Partially threaded stops the timber jacking. NOTE: Partially threaded from 40mm• Rapid drive twist cut enhances drive performance• Slash point tip helps prevent the timber splitting when screwing close to the edge, whilst also helping to reduce torque. NOTE: Slash point from 25mm and above Brand TIMCO CE Standard BS EN 14592:2008 Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 10 Head Ø (mm) 9.68 Head Type Double Countersunk with Ribs Inner Thread Ø d1 (mm) 3.12 L (inch) 2 1⁄2 L (mm) 60 Lubrication Wax Material Carbon Steel Ø (mm) 5 Pack Qty 1000 Point Type Single Slash Recess Type Pozi Shank Type Rapid Drive Twist Size (imp.) 10 x 2 1⁄2 Size (mm) 5.0 x 60 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread Coverage Partially Threaded Thread L (mm) 40 Thread Ø (mm) 5 Thread Type Serrated Dual Angle
£33.99
The unique patented Velocity screw has been specifically designed to give rapid installation into many different materials, whilst achieving exceptional pull-out resistance. It has been designed to give the user a consistent and reliable product that can be used in a variety of applications. • Dual angle thread designed for superior hold• Partially threaded stops the timber jacking. NOTE: Partially threaded from 40mm• Rapid drive twist cut enhances drive performance• Slash point tip helps prevent the timber splitting when screwing close to the edge, whilst also helping to reduce torque. NOTE: Slash point from 25mm and above Brand TIMCO CE Standard BS EN 14592:2008 Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 10 Head Ø (mm) 9.68 Head Type Double Countersunk with Ribs Inner Thread Ø d1 (mm) 3.12 L (inch) 2 3⁄4 L (mm) 70 Lubrication Wax Material Carbon Steel Ø (mm) 5 Pack Qty 1000 Point Type Single Slash Recess Type Pozi Shank Type Rapid Drive Twist Size (imp.) 10 x 2 3⁄4 Size (mm) 5.0 x 70 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread Coverage Partially Threaded Thread L (mm) 40 Thread Ø (mm) 5 Thread Type Serrated Dual Angle
£38.99
The unique patented Velocity screw has been specifically designed to give rapid installation into many different materials, whilst achieving exceptional pull-out resistance. It has been designed to give the user a consistent and reliable product that can be used in a variety of applications. • Dual angle thread designed for superior hold• Partially threaded stops the timber jacking. NOTE: Partially threaded from 40mm• Rapid drive twist cut enhances drive performance• Slash point tip helps prevent the timber splitting when screwing close to the edge, whilst also helping to reduce torque. NOTE: Slash point from 25mm and above Brand TIMCO CE Standard BS EN 14592:2008 Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 10 Head Ø (mm) 9.68 Head Type Double Countersunk with Ribs Inner Thread Ø d1 (mm) 3.12 L (inch) 3 L (mm) 80 Lubrication Wax Material Carbon Steel Ø (mm) 5 Pack Qty 1000 Point Type Single Slash Recess Type Pozi Shank Type Rapid Drive Twist Size (imp.) 10 x 3 Size (mm) 5.0 x 80 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread Coverage Partially Threaded Thread L (mm) 50 Thread Ø (mm) 5 Thread Type Serrated Dual Angle
£45.99
The unique patented Velocity screw has been specifically designed to give rapid installation into many different materials, whilst achieving exceptional pull-out resistance. It has been designed to give the user a consistent and reliable product that can be used in a variety of applications. • Dual angle thread designed for superior hold• Partially threaded stops the timber jacking. NOTE: Partially threaded from 40mm• Rapid drive twist cut enhances drive performance• Slash point tip helps prevent the timber splitting when screwing close to the edge, whilst also helping to reduce torque. NOTE: Slash point from 25mm and above Brand TIMCO CE Standard BS EN 14592:2008 Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 10 Head Ø (mm) 9.68 Head Type Double Countersunk with Ribs Inner Thread Ø d1 (mm) 3.12 L (inch) 3 1⁄2 L (mm) 90 Lubrication Wax Material Carbon Steel Ø (mm) 5 Pack Qty 1000 Point Type Single Slash Recess Type Pozi Shank Type Rapid Drive Twist Size (imp.) 10 x 3 1⁄2 Size (mm) 5.0 x 90 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread Coverage Partially Threaded Thread L (mm) 60 Thread Ø (mm) 5 Thread Type Serrated Dual Angle
£54.99
The unique patented Velocity screw has been specifically designed to give rapid installation into many different materials, whilst achieving exceptional pull-out resistance. It has been designed to give the user a consistent and reliable product that can be used in a variety of applications.
