Industry Packs

C2 is a revolutionary high-performance screw designed using modern manufacturing methods and an innovative twin-cut point, ensuring consistent and rapid pick-up while reducing timber splitting. Its superior holding strength in a wide variety of materials provides ultimate performance. • Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw• Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage• Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating• Dual angle thread for ultimate performance and exceptionally high pull-out resistance• Patented twin cut technology for rapid "pick-up" and reduces timber splitting• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length Application Joinery, Carpentry, Timber Construction, Furniture Manufacturing Brand TIMCO CE Standard BS EN 14592:2008 Colour Yellow Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 8 Head Ø (mm) 7.7 Head Type Double Countersunk Indoor/Outdoor Usage Indoor, Covered Outdoor Inner Thread Ø d1 (mm) 2.35 L (inch) 1 1⁄4  L (mm) 30 Lubrication Gleitmo Material Hardened Steel Ø (mm) 4 Pack Qty 1000 Point Type Twin-Cut Recess Type Pozi Resistant Type Corrosion-Resistant Size 4.0 x 30 Size (imp.) 8 x 1 1⁄4  Size (mm) 4.0 x 30 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread Coverage Fully Threaded Thread L (mm) 25 Thread Ø (mm) 4 Thread Type 40° Single Deep  

Read more less

A single thread woodscrew mainly used in various types of timber and man-made boards or into masonry with the use of a plastic plug. • Double countersunk reduces the likelihood of head shear and assists completion of countersinking• Wax lubricated to enhance screw insertion time, extra driving torque and resistance to corrosion• 40° deep single thread to provide a secure fixing with high pull-out resistance• 25° sharp point and single lead for a fast start and improved thread acceptance• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length Brand TIMCO CE Standard BS EN 14592:2008 Corrosion Rating (1-5) 1 - Clean, dry & low humidity environments Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 8 Head Ø (mm) 7.62 Head Type Double Countersunk Inner Thread Ø d1 (mm) 2.5 L (inch) 1 1⁄4  L (mm) 30 Lubrication Wax Material Carbon Steel Ø (mm) 4 Pack Qty 1000 Point Type 25° Sharp Recess Type Pozi Size (imp.) 8 x 1 1⁄4  Size (mm) 4.0 x 30 Substrates Softwood, Chipboard, MDF, Masonry (with plug) Thread Coverage Fully Threaded Thread L (mm) 25 Thread Ø (mm) 4 Thread Type 40° Single Deep

Read more less

C2 is a revolutionary high-performance screw designed using modern manufacturing methods and an innovative twin-cut point, ensuring consistent and rapid pick-up while reducing timber splitting. Its superior holding strength in a wide variety of materials provides ultimate performance. • Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw• Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage• Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating• Dual angle thread for ultimate performance and exceptionally high pull-out resistance• Patented twin cut technology for rapid "pick-up" and reduces timber splitting• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length Application Joinery, Carpentry, Timber Construction, Furniture Manufacturing Brand TIMCO CE Standard BS EN 14592:2008 Colour Yellow Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 8 Head Ø (mm) 7.7 Head Type Double Countersunk Indoor/Outdoor Usage Indoor, Covered Outdoor Inner Thread Ø d1 (mm) 2.35 L (inch) 1 1⁄2  L (mm) 40 Lubrication Gleitmo Material Hardened Steel Ø (mm) 4 Pack Qty 1000 Point Type Twin-Cut Recess Type Pozi Resistant Type Corrosion-Resistant Size 4.0 x 40 Size (imp.) 8 x 1 1⁄2  Size (mm) 4.0 x 40 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread Coverage Fully Threaded Thread L (mm) 35 Thread Ø (mm) 4 Thread Type 40° Single Deep  

Read more less

A single thread woodscrew mainly used in various types of timber and man-made boards or into masonry with the use of a plastic plug. • Double countersunk reduces the likelihood of head shear and assists completion of countersinking• Wax lubricated to enhance screw insertion time, extra driving torque and resistance to corrosion• 40° deep single thread to provide a secure fixing with high pull-out resistance• 25° sharp point and single lead for a fast start and improved thread acceptance• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length Brand TIMCO CE Standard BS EN 14592:2008 Corrosion Rating (1-5) 1 - Clean, dry & low humidity environments Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 8 Head Ø (mm) 7.62 Head Type Double Countersunk Inner Thread Ø d1 (mm) 2.5 L (inch) 1 1⁄2 L (mm) 40 Lubrication Wax Material Carbon Steel Ø (mm) 4 Pack Qty 1000 Point Type 25° Sharp Recess Type Pozi Size (imp.) 8 x 1 1⁄2 Size (mm) 4.0 x 40 Substrates Softwood, Chipboard, MDF, Masonry (with plug) Thread Coverage Fully Threaded Thread L (mm) 35 Thread Ø (mm) 4 Thread Type 40° Single Deep

Read more less

The unique patented Velocity screw has been specifically designed to give rapid installation into many different materials, whilst achieving exceptional pull-out resistance. It has been designed to give the user a consistent and reliable product that can be used in a variety of applications. • Dual angle thread designed for superior hold• Partially threaded stops the timber jacking. NOTE: Partially threaded from 40mm• Rapid drive twist cut enhances drive performance• Slash point tip helps prevent the timber splitting when screwing close to the edge, whilst also helping to reduce torque. NOTE: Slash point from 25mm and above Brand TIMCO CE Standard BS EN 14592:2008 Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 8 Head Ø (mm) 7.71 Head Type Double Countersunk with Ribs Inner Thread Ø d1 (mm) 2.52 L (inch) 1 1⁄2  L (mm) 40 Lubrication Wax Material Carbon Steel Ø (mm) 4 Pack Qty 1000 Point Type Single Slash Recess Type Pozi Shank Type Rapid Drive Twist Size (imp.) 8 x 1 1⁄2  Size (mm) 4.0 x 40 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread Coverage Partially Threaded Thread L (mm) 30 Thread Ø (mm) 4 Thread Type Serrated Dual Angle

Read more less

C2 is a revolutionary high-performance screw designed using modern manufacturing methods and an innovative twin-cut point, ensuring consistent and rapid pick-up while reducing timber splitting. Its superior holding strength in a wide variety of materials provides ultimate performance. • Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw• Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage• Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating• Dual angle thread for ultimate performance and exceptionally high pull-out resistance• Patented twin cut technology for rapid "pick-up" and reduces timber splitting• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length Application Joinery, Carpentry, Timber Construction, Furniture Manufacturing Brand TIMCO CE Standard BS EN 14592:2008 Colour Yellow Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 8 Head Ø (mm) 7.7 Head Type Double Countersunk Indoor/Outdoor Usage Indoor, Covered Outdoor Inner Thread Ø d1 (mm) 2.35 L (inch) 2 L (mm) 50 Lubrication Gleitmo Material Hardened Steel Ø (mm) 4 Pack Qty 1000 Point Type Twin-Cut Recess Type Pozi Resistant Type Corrosion-Resistant Size 4.0 x 50 Size (imp.) 8 x 2 Size (mm) 4.0 x 50 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread Coverage Fully Threaded Thread L (mm) 45 Thread Ø (mm) 4 Thread Type 40° Single Deep  

Read more less

A single thread woodscrew mainly used in various types of timber and man-made boards or into masonry with the use of a plastic plug. • Double countersunk reduces the likelihood of head shear and assists completion of countersinking• Wax lubricated to enhance screw insertion time, extra driving torque and resistance to corrosion• 40° deep single thread to provide a secure fixing with high pull-out resistance• 25° sharp point and single lead for a fast start and improved thread acceptance• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length Brand TIMCO CE Standard BS EN 14592:2008 Corrosion Rating (1-5) 1 - Clean, dry & low humidity environments Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 8 Head Ø (mm) 7.62 Head Type Double Countersunk Inner Thread Ø d1 (mm) 2.5 L (inch) 2 L (mm) 50 Lubrication Wax Material Carbon Steel Ø (mm) 4 Pack Qty 1000 Point Type 25° Sharp Recess Type Pozi Size (imp.) 8 x 2 Size (mm) 4.0 x 50 Substrates Softwood, Chipboard, MDF, Masonry (with plug) Thread Coverage Fully Threaded Thread L (mm) 45 Thread Ø (mm) 4 Thread Type 40° Single Deep

Read more less

The unique patented Velocity screw has been specifically designed to give rapid installation into many different materials, whilst achieving exceptional pull-out resistance. It has been designed to give the user a consistent and reliable product that can be used in a variety of applications. • Dual angle thread designed for superior hold• Partially threaded stops the timber jacking. NOTE: Partially threaded from 40mm• Rapid drive twist cut enhances drive performance• Slash point tip helps prevent the timber splitting when screwing close to the edge, whilst also helping to reduce torque. NOTE: Slash point from 25mm and above Brand TIMCO CE Standard BS EN 14592:2008 Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 8 Head Ø (mm) 7.71 Head Type Double Countersunk with Ribs Inner Thread Ø d1 (mm) 2.52 L (inch) 2 L (mm) 50 Lubrication Wax Material Carbon Steel Ø (mm) 4 Pack Qty 1000 Point Type Single Slash Recess Type Pozi Shank Type Rapid Drive Twist Size (imp.) 8 x 2 Size (mm) 4.0 x 50 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread Coverage Partially Threaded Thread L (mm) 30 Thread Ø (mm) 4 Thread Type Serrated Dual Angle

Read more less

C2 is a revolutionary high-performance screw designed using modern manufacturing methods and an innovative twin-cut point, ensuring consistent and rapid pick-up while reducing timber splitting. Its superior holding strength in a wide variety of materials provides ultimate performance. • Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw• Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage• Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating• Dual angle thread for ultimate performance and exceptionally high pull-out resistance• Patented twin cut technology for rapid "pick-up" and reduces timber splitting• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length Application Joinery, Carpentry, Timber Construction, Furniture Manufacturing Brand TIMCO CE Standard BS EN 14592:2008 Colour Yellow Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 8 Head Ø (mm) 7.7 Head Type Double Countersunk Indoor/Outdoor Usage Indoor, Covered Outdoor Inner Thread Ø d1 (mm) 2.35 L (inch) 21⁄2 L (mm) 60 Lubrication Gleitmo Material Hardened Steel Ø (mm) 4 Pack Qty 1000 Point Type Twin-Cut Recess Type Pozi Resistant Type Corrosion-Resistant Size 4.0 x 60 Size (imp.) 8 x 21⁄2 Size (mm) 4.0 x 60 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread Coverage Fully Threaded Thread L (mm) 55 Thread Ø (mm) 4 Thread Type 40° Single Deep  

Read more less

A single thread woodscrew mainly used in various types of timber and man-made boards or into masonry with the use of a plastic plug. • Double countersunk reduces the likelihood of head shear and assists completion of countersinking• Wax lubricated to enhance screw insertion time, extra driving torque and resistance to corrosion• 40° deep single thread to provide a secure fixing with high pull-out resistance• 25° sharp point and single lead for a fast start and improved thread acceptance• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length Brand TIMCO CE Standard BS EN 14592:2008 Corrosion Rating (1-5) 1 - Clean, dry & low humidity environments Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 8 Head Ø (mm) 7.62 Head Type Double Countersunk Inner Thread Ø d1 (mm) 2.5 L (inch) 2 1⁄2 L (mm) 60 Lubrication Wax Material Carbon Steel Ø (mm) 4 Pack Qty 1000 Point Type 25° Sharp Recess Type Pozi Size (imp.) 8 x 2 1⁄2 Size (mm) 4.0 x 60 Substrates Softwood, Chipboard, MDF, Masonry (with plug) Thread Coverage Fully Threaded Thread L (mm) 55 Thread Ø (mm) 4 Thread Type 40° Single Deep

Read more less

C2 is a revolutionary high-performance screw designed using modern manufacturing methods and an innovative twin-cut point, ensuring consistent and rapid pick-up while reducing timber splitting. Its superior holding strength in a wide variety of materials provides ultimate performance. • Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw• Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage• Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating• Dual angle thread for ultimate performance and exceptionally high pull-out resistance• Patented twin cut technology for rapid "pick-up" and reduces timber splitting• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length Application Joinery, Carpentry, Timber Construction, Furniture Manufacturing Brand TIMCO CE Standard BS EN 14592:2008 Colour Yellow Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 8 Head Ø (mm) 7.7 Head Type Double Countersunk Indoor/Outdoor Usage Indoor, Covered Outdoor Inner Thread Ø d1 (mm) 2.35 L (inch) 3 L (mm) 80 Lubrication Gleitmo Material Hardened Steel Ø (mm) 4 Pack Qty 1000 Point Type Twin-Cut Recess Type Pozi Resistant Type Corrosion-Resistant Size 4.0 x 80 Size (imp.) 8 x 3 Size (mm) 4.0 x 80 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread Coverage Fully Threaded Thread L (mm) 70 Thread Ø (mm) 4 Thread Type 40° Single Deep  

Read more less

A single thread woodscrew mainly used in various types of timber and man-made boards or into masonry with the use of a plastic plug. • Double countersunk reduces the likelihood of head shear and assists completion of countersinking• Wax lubricated to enhance screw insertion time, extra driving torque and resistance to corrosion• 40° deep single thread to provide a secure fixing with high pull-out resistance• 25° sharp point and single lead for a fast start and improved thread acceptance• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length Brand TIMCO CE Standard BS EN 14592:2008 Corrosion Rating (1-5) 1 - Clean, dry & low humidity environments Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 8 Head Ø (mm) 7.62 Head Type Double Countersunk Inner Thread Ø d1 (mm) 2.5 L (inch) 3 L (mm) 80 Lubrication Wax Material Carbon Steel Ø (mm) 4 Pack Qty 1000 Point Type 25° Sharp Recess Type Pozi Size (imp.) 8 x 3 Size (mm) 4.0 x 80 Substrates Softwood, Chipboard, MDF, Masonry (with plug) Thread Coverage Fully Threaded Thread L (mm) 70 Thread Ø (mm) 4 Thread Type 40° Single Deep

Read more less

An economic but highly effective softwood decking screw. Plated to withstand up to 500 hours in a salt spray cabinet and designed to give a rapid installation and a secure fixing. • Ribs under head for improved countersinking• Helix shank for removing debris and to improve clamping• 25° sharp point and single lead for a fast start and improved thread acceptance Brand TIMCO CE Standard BS EN 14592:2008 Colour Green Corrosion Rating (1-5) 3 - Urban & industrial areas with a low salt atmosphere Driver Bit Size PZ2 Finish Exterior (Green Organic) Gauge 9 Head Ø (mm) 8.76 Head Type Double Countersunk with Ribs Inner Thread Ø d1 (mm) 2.7 L (inch) 2 1⁄2  L (mm) 60 Material Carbon Steel Ø (mm) 4.5 Pack Qty 1000 Point Type 25° Sharp Recess Type Pozi Shank Type Helix Size (imp.) 9 x 2 1⁄2  Size (mm) 4.5 x 60 Substrates Hardwood, Softwood Thread Coverage Partially Threaded Thread L (mm) 42 Thread Ø (mm) 4.5 Thread Type 40° Single Deep

Read more less

The C2 Deck-Fix with a green organic coating ideal for outdoor projects. ?C2 is a revolutionary high-performance screw designed using modern manufacturing methods and an innovative twin-cut point, ensuring consistent and rapid pick-up while reducing timber splitting. Its superior holding strength in a variety of timber providing an ultimate performance. • Strengthened head to prevent shearing when installed with an impact tool.• Ribs under the head for improved countersinking.• Helix shank for removing debris and to improve clamping.• Coated with a patented multi-layer corrosion resistant plating to withstand 1,000 hours salt spray.• Patented twin cut technology for rapid "pick-up" and reduces timber splitting. Application Decking, Landscaping, Outdoor Structures (i.e. Pergolas, Fences, Sheds) Brand TIMCO CE Standard BS EN 14592:2008 Colour Green Corrosion Rating (1-5) 3 - Urban & industrial areas with a low salt atmosphere Driver Bit Size TX20 Driver Bit Type TX Drive Finish Exterior (Green Organic) Gauge 9 Head Ø (mm) 7.98 Head Type Double Countersunk with Ribs Indoor/Outdoor Usage Outdoor Inner Thread Ø d1 (mm) 2.7 L (inch) 2 1⁄2  L (mm) 65 Material Hardened Steel Ø (mm) 4.5 Pack Qty 1000 Point Type Twin-Cut Recess Type TX Drive Resistant Type Corrosion-Resistant Shank Type Helix Size 4.5 x 65 Size (imp.) 9 x 2 1⁄2  Size (mm) 4.5 x 65 Thread Coverage Partially Threaded Thread L (mm) 42 Thread Ø (mm) 4.5 Thread Type 40° Single Deep

Read more less

C2 is a revolutionary high-performance screw designed using modern manufacturing methods and an innovative twin-cut point, ensuring consistent and rapid pick-up while reducing timber splitting. Its superior holding strength in a wide variety of materials provides ultimate performance. • Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw• Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage• Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating• Dual angle thread for ultimate performance and exceptionally high pull-out resistance• Patented twin cut technology for rapid "pick-up" and reduces timber splitting• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length Application Joinery, Carpentry, Timber Construction, Furniture Manufacturing Brand TIMCO CE Standard BS EN 14592:2008 Colour Yellow Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 10 Head Ø (mm) 9.7 Head Type Double Countersunk Indoor/Outdoor Usage Indoor, Covered Outdoor Inner Thread Ø d1 (mm) 2.95 L (inch) 4 L (mm) 100 Lubrication Gleitmo Material Hardened Steel Ø (mm) 5 Pack Qty 1000 Point Type Twin-Cut Recess Type Pozi Resistant Type Corrosion-Resistant Size 5.0 x 100 Size (imp.) 10 x 4 Size (mm) 5.0 x 100 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread Coverage Fully Threaded Thread L (mm) 70 Thread Ø (mm) 5 Thread Type 40° Single Deep  

Read more less

A single thread woodscrew mainly used in various types of timber and man-made boards or into masonry with the use of a plastic plug. • Double countersunk reduces the likelihood of head shear and assists completion of countersinking• Wax lubricated to enhance screw insertion time, extra driving torque and resistance to corrosion• 40° deep single thread to provide a secure fixing with high pull-out resistance• 25° sharp point and single lead for a fast start and improved thread acceptance• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length Brand TIMCO CE Standard BS EN 14592:2008 Corrosion Rating (1-5) 1 - Clean, dry & low humidity environments Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 10 Head Ø (mm) 9.74 Head Type Double Countersunk Inner Thread Ø d1 (mm) 3.1 L (inch) 3 L (mm) 80 Lubrication Wax Material Carbon Steel Ø (mm) 5 Pack Qty 1000 Point Type 25° Sharp Recess Type Pozi Size (imp.) 10 x 3 Size (mm) 5.0 x 80 Substrates Softwood, Chipboard, MDF, Masonry (with plug) Thread Coverage Fully Threaded Thread L (mm) 70 Thread Ø (mm) 5 Thread Type 40° Single Deep

Read more less

The unique patented Velocity screw has been specifically designed to give rapid installation into many different materials, whilst achieving exceptional pull-out resistance. It has been designed to give the user a consistent and reliable product that can be used in a variety of applications. • Dual angle thread designed for superior hold• Partially threaded stops the timber jacking. NOTE: Partially threaded from 40mm• Rapid drive twist cut enhances drive performance• Slash point tip helps prevent the timber splitting when screwing close to the edge, whilst also helping to reduce torque. NOTE: Slash point from 25mm and above Brand TIMCO CE Standard BS EN 14592:2008 Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 10 Head Ø (mm) 9.68 Head Type Double Countersunk with Ribs Inner Thread Ø d1 (mm) 3.12 L (inch) 4 L (mm) 100 Lubrication Wax Material Carbon Steel Ø (mm) 5 Pack Qty 1000 Point Type Single Slash Recess Type Pozi Shank Type Rapid Drive Twist Size (imp.) 10 x 4 Size (mm) 5.0 x 100 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread Coverage Partially Threaded Thread L (mm) 70 Thread Ø (mm) 5 Thread Type Serrated Dual Angle

Read more less

The unique patented Velocity screw has been specifically designed to give rapid installation into many different materials, whilst achieving exceptional pull-out resistance. It has been designed to give the user a consistent and reliable product that can be used in a variety of applications. • Dual angle thread designed for superior hold• Partially threaded stops the timber jacking. NOTE: Partially threaded from 40mm• Rapid drive twist cut enhances drive performance• Slash point tip helps prevent the timber splitting when screwing close to the edge, whilst also helping to reduce torque. NOTE: Slash point from 25mm and above Brand TIMCO CE Standard BS EN 14592:2008 Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 10 Head Ø (mm) 9.68 Head Type Double Countersunk with Ribs Inner Thread Ø d1 (mm) 3.12 L (inch) 1 1⁄2 L (mm) 40 Lubrication Wax Material Carbon Steel Ø (mm) 5 Pack Qty 1000 Point Type Single Slash Recess Type Pozi Shank Type Rapid Drive Twist Size (imp.) 10 x 1 1⁄2 Size (mm) 5.0 x 40 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread Coverage Partially Threaded Thread L (mm) 30 Thread Ø (mm) 5 Thread Type Serrated Dual Angle

Read more less

C2 is a revolutionary high-performance screw designed using modern manufacturing methods and an innovative twin-cut point, ensuring consistent and rapid pick-up while reducing timber splitting. Its superior holding strength in a wide variety of materials provides ultimate performance. • Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw• Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage• Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating• Dual angle thread for ultimate performance and exceptionally high pull-out resistance• Patented twin cut technology for rapid "pick-up" and reduces timber splitting• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length Application Joinery, Carpentry, Timber Construction, Furniture Manufacturing Brand TIMCO CE Standard BS EN 14592:2008 Colour Yellow Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 10 Head Ø (mm) 9.7 Head Type Double Countersunk Indoor/Outdoor Usage Indoor, Covered Outdoor Inner Thread Ø d1 (mm) 2.95 L (inch) 2 L (mm) 50 Lubrication Gleitmo Material Hardened Steel Ø (mm) 5 Pack Qty 1000 Point Type Twin-Cut Recess Type Pozi Resistant Type Corrosion-Resistant Size 5.0 x 50 Size (imp.) 10 x 2 Size (mm) 5.0 x 50 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread Coverage Fully Threaded Thread L (mm) 45 Thread Ø (mm) 5 Thread Type 40° Single Deep  

Read more less

A single thread woodscrew mainly used in various types of timber and man-made boards or into masonry with the use of a plastic plug. • Double countersunk reduces the likelihood of head shear and assists completion of countersinking• Wax lubricated to enhance screw insertion time, extra driving torque and resistance to corrosion• 40° deep single thread to provide a secure fixing with high pull-out resistance• 25° sharp point and single lead for a fast start and improved thread acceptance• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length Brand TIMCO CE Standard BS EN 14592:2008 Corrosion Rating (1-5) 1 - Clean, dry & low humidity environments Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 10 Head Ø (mm) 9.74 Head Type Double Countersunk Inner Thread Ø d1 (mm) 3.1 L (inch) 2 L (mm) 50 Lubrication Wax Material Carbon Steel Ø (mm) 5 Pack Qty 1000 Point Type 25° Sharp Recess Type Pozi Size (imp.) 10 x 2 Size (mm) 5.0 x 50 Substrates Softwood, Chipboard, MDF, Masonry (with plug) Thread Coverage Fully Threaded Thread L (mm) 45 Thread Ø (mm) 5 Thread Type 40° Single Deep

Read more less

The unique patented Velocity screw has been specifically designed to give rapid installation into many different materials, whilst achieving exceptional pull-out resistance. It has been designed to give the user a consistent and reliable product that can be used in a variety of applications. • Dual angle thread designed for superior hold• Partially threaded stops the timber jacking. NOTE: Partially threaded from 40mm• Rapid drive twist cut enhances drive performance• Slash point tip helps prevent the timber splitting when screwing close to the edge, whilst also helping to reduce torque. NOTE: Slash point from 25mm and above Brand TIMCO CE Standard BS EN 14592:2008 Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 10 Head Ø (mm) 9.68 Head Type Double Countersunk with Ribs Inner Thread Ø d1 (mm) 3.12 L (inch) 2 L (mm) 50 Lubrication Wax Material Carbon Steel Ø (mm) 5 Pack Qty 1000 Point Type Single Slash Recess Type Pozi Shank Type Rapid Drive Twist Size (imp.) 10 x 2 Size (mm) 5.0 x 50 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread Coverage Partially Threaded Thread L (mm) 30 Thread Ø (mm) 5 Thread Type Serrated Dual Angle

Read more less

C2 is a revolutionary high-performance screw designed using modern manufacturing methods and an innovative twin-cut point, ensuring consistent and rapid pick-up while reducing timber splitting. Its superior holding strength in a wide variety of materials provides ultimate performance. • Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw• Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage• Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating• Dual angle thread for ultimate performance and exceptionally high pull-out resistance• Patented twin cut technology for rapid "pick-up" and reduces timber splitting• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length Application Joinery, Carpentry, Timber Construction, Furniture Manufacturing Brand TIMCO CE Standard BS EN 14592:2008 Colour Yellow Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 10 Head Ø (mm) 9.7 Head Type Double Countersunk Indoor/Outdoor Usage Indoor, Covered Outdoor Inner Thread Ø d1 (mm) 2.95 L (inch) 2 1⁄2 L (mm) 60 Lubrication Gleitmo Material Hardened Steel Ø (mm) 5 Pack Qty 1000 Point Type Twin-Cut Recess Type Pozi Resistant Type Corrosion-Resistant Size 5.0 x 60 Size (imp.) 10 x 2 1⁄2 Size (mm) 5.0 x 60 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread Coverage Fully Threaded Thread L (mm) 55 Thread Ø (mm) 5 Thread Type 40° Single Deep  

Read more less

A single thread woodscrew mainly used in various types of timber and man-made boards or into masonry with the use of a plastic plug. • Double countersunk reduces the likelihood of head shear and assists completion of countersinking• Wax lubricated to enhance screw insertion time, extra driving torque and resistance to corrosion• 40° deep single thread to provide a secure fixing with high pull-out resistance• 25° sharp point and single lead for a fast start and improved thread acceptance• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length Brand TIMCO CE Standard BS EN 14592:2008 Corrosion Rating (1-5) 1 - Clean, dry & low humidity environments Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 10 Head Ø (mm) 9.74 Head Type Double Countersunk Inner Thread Ø d1 (mm) 3.1 L (inch) 2 1⁄2 L (mm) 60 Lubrication Wax Material Carbon Steel Ø (mm) 5 Pack Qty 1000 Point Type 25° Sharp Recess Type Pozi Size (imp.) 10 x 2 1⁄2 Size (mm) 5.0 x 60 Substrates Softwood, Chipboard, MDF, Masonry (with plug) Thread Coverage Fully Threaded Thread L (mm) 55 Thread Ø (mm) 5 Thread Type 40° Single Deep

Read more less

The unique patented Velocity screw has been specifically designed to give rapid installation into many different materials, whilst achieving exceptional pull-out resistance. It has been designed to give the user a consistent and reliable product that can be used in a variety of applications. • Dual angle thread designed for superior hold• Partially threaded stops the timber jacking. NOTE: Partially threaded from 40mm• Rapid drive twist cut enhances drive performance• Slash point tip helps prevent the timber splitting when screwing close to the edge, whilst also helping to reduce torque. NOTE: Slash point from 25mm and above Brand TIMCO CE Standard BS EN 14592:2008 Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 10 Head Ø (mm) 9.68 Head Type Double Countersunk with Ribs Inner Thread Ø d1 (mm) 3.12 L (inch) 2 1⁄2  L (mm) 60 Lubrication Wax Material Carbon Steel Ø (mm) 5 Pack Qty 1000 Point Type Single Slash Recess Type Pozi Shank Type Rapid Drive Twist Size (imp.) 10 x 2 1⁄2  Size (mm) 5.0 x 60 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread Coverage Partially Threaded Thread L (mm) 40 Thread Ø (mm) 5 Thread Type Serrated Dual Angle

Read more less

C2 is a revolutionary high-performance screw designed using modern manufacturing methods and an innovative twin-cut point, ensuring consistent and rapid pick-up while reducing timber splitting. Its superior holding strength in a wide variety of materials provides ultimate performance. • Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw• Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage• Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating• Dual angle thread for ultimate performance and exceptionally high pull-out resistance• Patented twin cut technology for rapid "pick-up" and reduces timber splitting• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length Application Joinery, Carpentry, Timber Construction, Furniture Manufacturing Brand TIMCO CE Standard BS EN 14592:2008 Colour Yellow Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 10 Head Ø (mm) 9.7 Head Type Double Countersunk Indoor/Outdoor Usage Indoor, Covered Outdoor Inner Thread Ø d1 (mm) 2.95 L (inch) 2 3⁄4 L (mm) 70 Lubrication Gleitmo Material Hardened Steel Ø (mm) 5 Pack Qty 1000 Point Type Twin-Cut Recess Type Pozi Resistant Type Corrosion-Resistant Size 5.0 x 70 Size (imp.) 10 x 2 3⁄4 Size (mm) 5.0 x 70 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread Coverage Fully Threaded Thread L (mm) 65 Thread Ø (mm) 5 Thread Type 40° Single Deep  

Read more less

The unique patented Velocity screw has been specifically designed to give rapid installation into many different materials, whilst achieving exceptional pull-out resistance. It has been designed to give the user a consistent and reliable product that can be used in a variety of applications. • Dual angle thread designed for superior hold• Partially threaded stops the timber jacking. NOTE: Partially threaded from 40mm• Rapid drive twist cut enhances drive performance• Slash point tip helps prevent the timber splitting when screwing close to the edge, whilst also helping to reduce torque. NOTE: Slash point from 25mm and above Brand TIMCO CE Standard BS EN 14592:2008 Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 10 Head Ø (mm) 9.68 Head Type Double Countersunk with Ribs Inner Thread Ø d1 (mm) 3.12 L (inch) 2 3⁄4 L (mm) 70 Lubrication Wax Material Carbon Steel Ø (mm) 5 Pack Qty 1000 Point Type Single Slash Recess Type Pozi Shank Type Rapid Drive Twist Size (imp.) 10 x 2 3⁄4  Size (mm) 5.0 x 70 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread Coverage Partially Threaded Thread L (mm) 40 Thread Ø (mm) 5 Thread Type Serrated Dual Angle

Read more less

C2 is a revolutionary high-performance screw designed using modern manufacturing methods and an innovative twin-cut point, ensuring consistent and rapid pick-up while reducing timber splitting. Its superior holding strength in a wide variety of materials provides ultimate performance. • Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw• Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage• Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating• Dual angle thread for ultimate performance and exceptionally high pull-out resistance• Patented twin cut technology for rapid "pick-up" and reduces timber splitting• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length Application Joinery, Carpentry, Timber Construction, Furniture Manufacturing Brand TIMCO CE Standard BS EN 14592:2008 Colour Yellow Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 10 Head Ø (mm) 9.7 Head Type Double Countersunk Indoor/Outdoor Usage Indoor, Covered Outdoor Inner Thread Ø d1 (mm) 2.95 L (inch) 3 L (mm) 80 Lubrication Gleitmo Material Hardened Steel Ø (mm) 5 Pack Qty 1000 Point Type Twin-Cut Recess Type Pozi Resistant Type Corrosion-Resistant Size 5.0 x 80 Size (imp.) 10 x 3 Size (mm) 5.0 x 80 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread Coverage Fully Threaded Thread L (mm) 70 Thread Ø (mm) 5 Thread Type 40° Single Deep  

Read more less

A single thread woodscrew mainly used in various types of timber and man-made boards or into masonry with the use of a plastic plug. • Double countersunk reduces the likelihood of head shear and assists completion of countersinking• Wax lubricated to enhance screw insertion time, extra driving torque and resistance to corrosion• 40° deep single thread to provide a secure fixing with high pull-out resistance• 25° sharp point and single lead for a fast start and improved thread acceptance• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length Brand TIMCO CE Standard BS EN 14592:2008 Corrosion Rating (1-5) 1 - Clean, dry & low humidity environments Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 10 Head Ø (mm) 9.74 Head Type Double Countersunk Inner Thread Ø d1 (mm) 3.1 L (inch) 3 L (mm) 80 Lubrication Wax Material Carbon Steel Ø (mm) 5 Pack Qty 1000 Point Type 25° Sharp Recess Type Pozi Size (imp.) 10 x 3 Size (mm) 5.0 x 80 Substrates Softwood, Chipboard, MDF, Masonry (with plug) Thread Coverage Fully Threaded Thread L (mm) 70 Thread Ø (mm) 5 Thread Type 40° Single Deep

Read more less

The unique patented Velocity screw has been specifically designed to give rapid installation into many different materials, whilst achieving exceptional pull-out resistance. It has been designed to give the user a consistent and reliable product that can be used in a variety of applications. • Dual angle thread designed for superior hold• Partially threaded stops the timber jacking. NOTE: Partially threaded from 40mm• Rapid drive twist cut enhances drive performance• Slash point tip helps prevent the timber splitting when screwing close to the edge, whilst also helping to reduce torque. NOTE: Slash point from 25mm and above Brand TIMCO CE Standard BS EN 14592:2008 Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 10 Head Ø (mm) 9.68 Head Type Double Countersunk with Ribs Inner Thread Ø d1 (mm) 3.12 L (inch) 3 L (mm) 80 Lubrication Wax Material Carbon Steel Ø (mm) 5 Pack Qty 1000 Point Type Single Slash Recess Type Pozi Shank Type Rapid Drive Twist Size (imp.) 10 x 3  Size (mm) 5.0 x 80 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread Coverage Partially Threaded Thread L (mm) 50 Thread Ø (mm) 5 Thread Type Serrated Dual Angle

Read more less

The unique patented Velocity screw has been specifically designed to give rapid installation into many different materials, whilst achieving exceptional pull-out resistance. It has been designed to give the user a consistent and reliable product that can be used in a variety of applications. • Dual angle thread designed for superior hold• Partially threaded stops the timber jacking. NOTE: Partially threaded from 40mm• Rapid drive twist cut enhances drive performance• Slash point tip helps prevent the timber splitting when screwing close to the edge, whilst also helping to reduce torque. NOTE: Slash point from 25mm and above Brand TIMCO CE Standard BS EN 14592:2008 Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 10 Head Ø (mm) 9.68 Head Type Double Countersunk with Ribs Inner Thread Ø d1 (mm) 3.12 L (inch) 3 1⁄2 L (mm) 90 Lubrication Wax Material Carbon Steel Ø (mm) 5 Pack Qty 1000 Point Type Single Slash Recess Type Pozi Shank Type Rapid Drive Twist Size (imp.) 10 x 3 1⁄2  Size (mm) 5.0 x 90 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread Coverage Partially Threaded Thread L (mm) 60 Thread Ø (mm) 5 Thread Type Serrated Dual Angle

Read more less