Products

Boresite heavy duty plasterboard wall fixings are designed to provide a secure mounting solution for heavy items without the need for additional support. Each fixing is engineered to hold up to 35 kgs of weight, ensuring reliable performance. • Hold up to 35kgs per wall fixing• Designed for 12.5mm plasterboards• For stud walls with 15mm cavity• Simple drill free installation• Patented design to maximise load to cost• Made with engineering PA6 polymer Instructions 1️⃣ Mark a screw hole and cutting slot on the wall using the included marking template2️⃣ Cut a 3mm thick slot with a drywall saw or utility knife where marked3️⃣ Straighten Section B until at 90° to Section A and the band is under tension4️ Insert into the drywall slot until Section A makes contact with the wall5️ Mount your hook or bracket to the wall using the included screws Please Note:Boresite works by spreading the load over a large surface area of Plasterboard and relies on the screw engaging through the hole in Section B. It is the user’s responsibility to ensure proper engagement by following good installation practice. The manufacturer or Frank's Fasteners is not responsible for damage, destruction or loss of property or belongings due to incorrect installation.

Read more less

Boresite heavy duty plasterboard wall fixings are designed to provide a secure mounting solution for heavy items without the need for additional support. Each fixing is engineered to hold up to 35 kgs of weight, ensuring reliable performance. • Hold up to 35kgs per wall fixing• Designed for 12.5mm plasterboards• For stud walls with 15mm cavity• Simple drill free installation• Patented design to maximise load to cost• Made with engineering PA6 polymer Instructions 1️⃣ Mark a screw hole and cutting slot on the wall using the included marking template2️⃣ Cut a 3mm thick slot with a drywall saw or utility knife where marked3️⃣ Straighten Section B until at 90° to Section A and the band is under tension4️ Insert into the drywall slot until Section A makes contact with the wall5️ Mount your hook or bracket to the wall using the included screws Please Note:Boresite works by spreading the load over a large surface area of Plasterboard and relies on the screw engaging through the hole in Section B. It is the user’s responsibility to ensure proper engagement by following good installation practice. The manufacturer or Frank's Fasteners is not responsible for damage, destruction or loss of property or belongings due to incorrect installation.

Read more less

A premium quality brick hammer, manufactured from a single piece of toughened and hardened steel, with tempered strike faces and a soft-grip handle to reduce vibrations. • Precision ground chisel for controlled and accurate shaping of masonry• High strength single piece steel to maximise driving force whilst minimising user fatigue• Ergonomic anti-slip grip for safety, increased user comfort and long lasting performance• Heat treated & tempered strike faces for professional and long lasting performance Brand TIMCO Handle Material Thermoplastic Rubber (TPR) Head Weight 20oz Head Weight (kg) 0.56 Head Weight (oz) 20 Neck Material Single Piece Steel Size (inch) 12 1⁄2  Size (mm) 317 Total L (inch) 12 1⁄2  Total L (mm) 317

Read more less

PVC Insulation Tape is a durable, flexible adhesive tape made from Polyvinyl Chloride (PVC). It's widely used for electrical insulation, bundling, and protecting wiring in various industries. Its heat resistance, flexibility, and strong adhesion make it ideal for securing and insulating electrical connections, preventing short circuits, and ensuring safety in both residential and industrial applications. PVC insulation tape is available in a range of colours, making it useful for colour-coding wires and components. Brown PVC Insulation Tape - 20m (length) x 19mm (width)  • Material: PVC• Working Temperature: -18℃ to 105℃• Tensile Strength: 22N/10mm• Adhesion to steel – 2.5 N/10mm• Elongation: 125%• Dielectric Strength: 40kV/mm

Read more less

Bullfix has developed an innovative cupboard bracket, specifically designed for use with concealed wall hangers when mounting cupboards on plasterboard.By installing this bracket with Bullfix Plasterboard Fixings, you can ensure a strong and reliable hold. This is the only wall bracket that has been rigorously tested and approved by FIRA, guaranteeing its quality and safety.For use with concealed wall brackets hangers  

Read more less

BULLFIX HEAVY DUTY HOOKS HAVE BEEN DESIGNED FOR HANGING YOUR HEAVY PICTURE, MIRROR OR CANVAS TO ANY INTERNAL OR EXTERNAL WALLS.WHEN INSTALLED WITH BULLFIX PLASTERBOARD FIXINGS, THE HOOK CAN HANG UP TO 50KG IN WEIGHT, GIVING YOU THE CONFIDENCE THAT YOUR OBJECT WILL HOLD STRONG. ● MADE OF HIGH-QUALITY STEEL AND IS ZINC PLATED● SUITABLE FOR HANGING HEAVY MIRRORS, PICTURES OR CANVAS● CAN BE USED ON ANY TYPE OF WALL OR PLASTERBOARD WHEN INSTALLED WITH BULLFIX PLASTERBOARD FIXINGS● SAFETY CLIP ENSURES THAT YOUR HEAVY ITEM WILL NOT SLIP FROM THE HOOK● SUPPORTS UP TO 50KG IN WEIGHT Kit Contains10 x HEAVY DUTY HOOKS10 X SECURITY CLIPS10 X SCREWS10 X MASONRY PLUGS

Read more less

THE BULLFIX CUPBOARD BRACKET HAS BEEN DESIGNED FOR USE WITH BULLFIX HEAVY DUTY PLASTERBOARD FIXINGS TO HANG KITCHEN CUPBOARDS, BATHROOM CABINETS, AND OTHER WALL HUNG CUPBOARDS TO PLASTERBOARD.THE BRACKET FEATURES A WIDER DISTANCE BETWEEN THE SCREW HOLES AND A SUPPORTING LIP TO EVENLY DISTRIBUTE THE WEIGHT AND PROVIDE OPTIMAL STRENGTH. ● DESIGNED FOR USE WITH BULLFIX PLASTERBOARD FIXINGS● MADE OF HIGH-QUALITY STEEL AND IS ZINC PLATED● SUITABLE TO SUBSTITUTE ALL STANDARD WALL KITCHEN CUPBOARD BRACKET OR PLATE SYSTEMS Kit Contains4 x FIXINGS AND COLLARS4 X ∅5MM X 20MM SCREWS2 X CABINET BRACKETS

Read more less

BULLFIX HEAVY DUTY HOOKS HAVE BEEN DESIGNED FOR HANGING YOUR HEAVY PICTURE, MIRROR OR CANVAS TO ANY INTERNAL OR EXTERNAL WALLS.WHEN INSTALLED WITH BULLFIX PLASTERBOARD FIXINGS, THE HOOK CAN HANG UP TO 50KG IN WEIGHT, GIVING YOU THE CONFIDENCE THAT YOUR OBJECT WILL HOLD STRONG. ● MADE OF HIGH-QUALITY STEEL AND IS ZINC PLATED● SUITABLE FOR HANGING HEAVY MIRRORS, PICTURES OR CANVAS● CAN BE USED ON ANY TYPE OF WALL OR PLASTERBOARD WHEN INSTALLED WITH BULLFIX PLASTERBOARD FIXINGS● SAFETY CLIP ENSURES THAT YOUR HEAVY ITEM WILL NOT SLIP FROM THE HOOK● SUPPORTS UP TO 50KG IN WEIGHT Kit ContainsA 20MM DRILL BIT4 X FIXINGS AND COLLARS4 X ∅5MM X 35MM SCREWS4 X WASHERS

Read more less

● FOR USE ON STUD WALLS, DOT & DAB AND INSULATION BACKED PLASTERBOARD OF STANDARD THICKNESS (12.5MM – 16MM)● PATENTED SMART WING DESIGN WHICH REMAINS TIGHT AND FIRM WITHOUT WORKING LOOSE● INSERTING A SCREW IS IMPOSSIBLE UNLESS WINGS HAVE FULLY DEPLOYED● ONLY 7MM CAVITY IS REQUIRED*● SUPPORTS UP TO 116KG OF WEIGHT Kit Contains4 x FIXINGS & COLLARS4 X ∅5MM X 20MM SCREWS4 X WASHERS

Read more less

When it comes to heavy radiators like decorative and column radiators, standard manufacturer supplied brackets often fall short when securing safely and reliably to plasterboard.Bullfix Radiator Adapter Brackets provide the ideal solution. When installed with your existing brackets, they effectively distribute the load across the plasterboard, enhancing strength and stability. Pair them with Bullfix Plasterboard Fixings for even greater reliability. ● Strong and ReliableBullfix radiator brackets spread the weight evenly across the plasterboard, ensuring that even the heaviest radiators stay securely mounted.● Innovative TechnologyBullfix Plasterboard Fixings feature patented smart wings which eliminate the need for costly stud work and remain tight and firm without working loose.● Universally CompatibleBullfix Universal are versatile and can be used on all plasterboard applications, including dot & dab, stud walls, and insulation-backed plasterboard.Available in medium and heavy duty, and in white and anthracite to match any interiors.

Read more less

When it comes to heavy radiators like decorative and column radiators, standard manufacturer supplied brackets often fall short when securing safely and reliably to plasterboard.Bullfix Radiator Adapter Brackets provide the ideal solution. When installed with your existing brackets, they effectively distribute the load across the plasterboard, enhancing strength and stability. Pair them with Bullfix Plasterboard Fixings for even greater reliability. ● Strong and ReliableBullfix radiator brackets spread the weight evenly across the plasterboard, ensuring that even the heaviest radiators stay securely mounted.● Innovative TechnologyBullfix Plasterboard Fixings feature patented smart wings which eliminate the need for costly stud work and remain tight and firm without working loose.● Universally CompatibleBullfix Universal are versatile and can be used on all plasterboard applications, including dot & dab, stud walls, and insulation-backed plasterboard.Available in medium and heavy duty, and in white and anthracite to match any interiors.

Read more less

When it comes to heavy radiators like decorative and column radiators, standard manufacturer supplied brackets often fall short when securing safely and reliably to plasterboard.Bullfix Radiator Adapter Brackets provide the ideal solution. When installed with your existing brackets, they effectively distribute the load across the plasterboard, enhancing strength and stability. Pair them with Bullfix Plasterboard Fixings for even greater reliability. ● Strong and ReliableBullfix radiator brackets spread the weight evenly across the plasterboard, ensuring that even the heaviest radiators stay securely mounted.● Innovative TechnologyBullfix Plasterboard Fixings feature patented smart wings which eliminate the need for costly stud work and remain tight and firm without working loose.● Universally CompatibleBullfix Universal are versatile and can be used on all plasterboard applications, including dot & dab, stud walls, and insulation-backed plasterboard.Available in medium and heavy duty, and in white and anthracite to match any interiors.

Read more less

When it comes to heavy radiators like decorative and column radiators, standard manufacturer supplied brackets often fall short when securing safely and reliably to plasterboard.Bullfix Radiator Adapter Brackets provide the ideal solution. When installed with your existing brackets, they effectively distribute the load across the plasterboard, enhancing strength and stability. Pair them with Bullfix Plasterboard Fixings for even greater reliability. ● Strong and ReliableBullfix radiator brackets spread the weight evenly across the plasterboard, ensuring that even the heaviest radiators stay securely mounted.● Innovative TechnologyBullfix Plasterboard Fixings feature patented smart wings which eliminate the need for costly stud work and remain tight and firm without working loose.● Universally CompatibleBullfix Universal are versatile and can be used on all plasterboard applications, including dot & dab, stud walls, and insulation-backed plasterboard.Available in medium and heavy duty, and in white and anthracite to match any interiors.

Read more less

Strong and reliable, heavy duty plasterboard fixings that only require a 7mm cavity. For dependable use when hanging heavy shelves to plasterboard. For use on any type of plasterboard, including stud, dot and dab and insulated (12.5-16mm). Features smart wing design that hooks behind the plasterboard. Easy to install in 5 simple steps. For Use in Plasterboard Countersunk Head Reusable Removable Metal & Plastic Max. Load: 116kg

Read more less

Strong and reliable, heavy duty plasterboard fixings that only require a 7mm cavity. For dependable use when hanging heavy shelves to plasterboard. For use on any type of plasterboard, including stud, dot and dab and insulated (12.5-16mm). Features smart wing design that hooks behind the plasterboard. Easy to install in 5 simple steps. For Use in Plasterboard Countersunk Head Reusable Removable Metal & Plastic Max. Load: 116kg

Read more less

● FOR USE ON STUD WALLS, DOT & DAB AND INSULATION BACKED PLASTERBOARD OF STANDARD THICKNESS (12.5MM – 16MM)● PATENTED SMART WING DESIGN WHICH REMAINS TIGHT AND FIRM WITHOUT WORKING LOOSE● INSERTING A SCREW IS IMPOSSIBLE UNLESS WINGS HAVE FULLY DEPLOYED● ONLY 7MM CAVITY IS REQUIRED*● SUPPORTS UP TO 116KG OF WEIGHT WE DO NOT RECOMMEND USING BULLFIX FOR TV MOUNTS WITH A CANTILEVER OR EXTENDABLE ARM AS WE CANNOT GUARANTEE THE RELIABILITY. Kit Contains• A 20MM DRILL BIT• 4 X FIXINGS AND COLLARS• 4 X ∅5MM X 20MM SCREWS• 4 X WASHERS

Read more less

IF YOU’RE LOOKING FOR A FIXING WHICH REQUIRES THAT EXTRA BIT OF STRENGTH AND CONFIDENCE, THE BULLFIX EXTRA FIXINGS ARE GUARANTEED TO HOLD STRONG. HOLDING UP TO 133KG* IN WEIGHT, THE BULLFIX EXTRA IS THE PERFECT CHOICE FOR HANGING RADIATORS, BOILERS, FIXED AND TILTING TV BRACKETS, HEAVY MIRRORS AND PICTURES.BULLFIX HAS BEEN DESIGNED TO MAKE YOUR LIFE EASIER, WHILE GIVING YOU THE CONFIDENCE THAT THEY’LL DO EXACTLY WHAT YOU NEED THEM TO DO. ● FOR USE ON STUD WALLS WITH PLASTERBOARD OF STANDARD THICKNESS (12.5MM – 16MM)● WINGS OPEN BEHIND THE PLASTERBOARD FOR AMAZING STRENGTH AND RELIABILITY● ONLY 22MM CAVITY IS REQUIRED*● SUPPORTS UP TO 133KG OF WEIGHT WE DO NOT RECOMMEND USING BULLFIX FOR TV MOUNTS WITH A CANTILEVER OR EXTENDABLE ARM AS WE CANNOT GUARANTEE THE RELIABILITY.FOR USE ON RADIATORS WITH AN APPROPRIATE BRACKET.*SEE DATASHEET FOR MORE INFORMATION Kit Contains● 24 X FIXINGS● 24 X COLLARS● 24 X ∅5MM X 35MM SCREWS

Read more less

IF YOU’RE LOOKING FOR A FIXING WHICH REQUIRES THAT EXTRA BIT OF STRENGTH AND CONFIDENCE, THE BULLFIX EXTRA FIXINGS ARE GUARANTEED TO HOLD STRONG. HOLDING UP TO 133KG* IN WEIGHT, THE BULLFIX EXTRA IS THE PERFECT CHOICE FOR HANGING RADIATORS, BOILERS, FIXED AND TILTING TV BRACKETS, HEAVY MIRRORS AND PICTURES.BULLFIX HAS BEEN DESIGNED TO MAKE YOUR LIFE EASIER, WHILE GIVING YOU THE CONFIDENCE THAT THEY’LL DO EXACTLY WHAT YOU NEED THEM TO DO. ● FOR USE ON STUD WALLS WITH PLASTERBOARD OF STANDARD THICKNESS (12.5MM – 16MM)● WINGS OPEN BEHIND THE PLASTERBOARD FOR AMAZING STRENGTH AND RELIABILITY● ONLY 22MM CAVITY IS REQUIRED*● SUPPORTS UP TO 133KG OF WEIGHT WE DO NOT RECOMMEND USING BULLFIX FOR TV MOUNTS WITH A CANTILEVER OR EXTENDABLE ARM AS WE CANNOT GUARANTEE THE RELIABILITY.FOR USE ON RADIATORS WITH AN APPROPRIATE BRACKET.*SEE DATASHEET FOR MORE INFORMATION Kit Contains● A 20MM DRILL BIT● 8 X FIXINGS AND COLLARS● 8 X ∅5MM X 35MM SCREWS

Read more less

IF YOU’RE LOOKING FOR A FIXING WHICH REQUIRES THAT EXTRA BIT OF STRENGTH AND CONFIDENCE, THE BULLFIX EXTRA FIXINGS ARE GUARANTEED TO HOLD STRONG. HOLDING UP TO 133KG* IN WEIGHT, THE BULLFIX EXTRA IS THE PERFECT CHOICE FOR HANGING RADIATORS, BOILERS, FIXED AND TILTING TV BRACKETS, HEAVY MIRRORS AND PICTURES.BULLFIX HAS BEEN DESIGNED TO MAKE YOUR LIFE EASIER, WHILE GIVING YOU THE CONFIDENCE THAT THEY’LL DO EXACTLY WHAT YOU NEED THEM TO DO. ● FOR USE ON STUD WALLS WITH PLASTERBOARD OF STANDARD THICKNESS (12.5MM – 16MM)● WINGS OPEN BEHIND THE PLASTERBOARD FOR AMAZING STRENGTH AND RELIABILITY● ONLY 22MM CAVITY IS REQUIRED*● SUPPORTS UP TO 133KG OF WEIGHT WE DO NOT RECOMMEND USING BULLFIX FOR TV MOUNTS WITH A CANTILEVER OR EXTENDABLE ARM AS WE CANNOT GUARANTEE THE RELIABILITY.FOR USE ON RADIATORS WITH AN APPROPRIATE BRACKET.*SEE DATASHEET FOR MORE INFORMATION Kit Contains● 96 X FIXINGS● 96 X COLLARS● 96 X ∅5MM X 35MM SCREWS

Read more less

● FOR USE ON STUD WALLS, DOT & DAB AND INSULATION BACKED PLASTERBOARD OF STANDARD THICKNESS (12.5MM – 16MM)● PATENTED SMART WING DESIGN WHICH REMAINS TIGHT AND FIRM WITHOUT WORKING LOOSE● INSERTING A SCREW IS IMPOSSIBLE UNLESS WINGS HAVE FULLY DEPLOYED● ONLY 7MM CAVITY IS REQUIRED*● SUPPORTS UP TO 116KG OF WEIGHT WE DO NOT RECOMMEND USING BULLFIX FOR TV MOUNTS WITH A CANTILEVER OR EXTENDABLE ARM AS WE CANNOT GUARANTEE THE RELIABILITY.FOR USE ON RADIATORS WITH AN APPROPRIATE BRACKET. *SEE DATASHEET FOR MORE INFORMATION Kit Contains• A 20MM DRILL BIT• 10 X FIXINGS AND COLLARS• 10 X ∅5MM X 20MM SCREWS

Read more less

● FOR USE ON STUD WALLS, DOT & DAB AND INSULATION BACKED PLASTERBOARD OF STANDARD THICKNESS (12.5MM – 16MM)● PATENTED SMART WING DESIGN WHICH REMAINS TIGHT AND FIRM WITHOUT WORKING LOOSE● INSERTING A SCREW IS IMPOSSIBLE UNLESS WINGS HAVE FULLY DEPLOYED● ONLY 7MM CAVITY IS REQUIRED*● SUPPORTS UP TO 116KG OF WEIGHT WE DO NOT RECOMMEND USING BULLFIX FOR TV MOUNTS WITH A CANTILEVER OR EXTENDABLE ARM AS WE CANNOT GUARANTEE THE RELIABILITY.FOR USE ON RADIATORS WITH AN APPROPRIATE BRACKET. *SEE DATASHEET FOR MORE INFORMATION Kit Contains• 24 X COLLARS• 24 X FIXINGS• 24 X ∅5MM X 20MM SCREWS

Read more less

● FOR USE ON STUD WALLS, DOT & DAB AND INSULATION BACKED PLASTERBOARD OF STANDARD THICKNESS (12.5MM – 16MM)● PATENTED SMART WING DESIGN WHICH REMAINS TIGHT AND FIRM WITHOUT WORKING LOOSE● INSERTING A SCREW IS IMPOSSIBLE UNLESS WINGS HAVE FULLY DEPLOYED● ONLY 7MM CAVITY IS REQUIRED*● SUPPORTS UP TO 116KG OF WEIGHT WE DO NOT RECOMMEND USING BULLFIX FOR TV MOUNTS WITH A CANTILEVER OR EXTENDABLE ARM AS WE CANNOT GUARANTEE THE RELIABILITY.FOR USE ON RADIATORS WITH AN APPROPRIATE BRACKET. *SEE DATASHEET FOR MORE INFORMATION Kit Contains• 96 X COLLARS• 96 X FIXINGS• 96 X ∅5MM X 20MM SCREWS

Read more less

The silver organic coated C2 Exterior Strong-Fix provides exceptional corrosion resistance for use in harsh environments. ?C2 is a revolutionary high-performance screw designed using modern manufacturing methods and an innovative twin-cut point, ensuring consistent and rapid pick-up while reducing timber splitting. Its superior holding strength in a wide variety of materials provides ultimate performance. • Patented twin cut technology for rapid "pick-up" and reduces timber splitting• Multi-layer coating consisting of organic top coat barrier and a zinc base layer• Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw • Patented twin cut technology for rapid "pick-up" and reduces timber splitting• Multi-layer coating consisting of organic top coat barrier and a zinc base layer• Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw Application Decking, Landscaping, Outdoor Structures (i.e. Pergolas, Fences, Sheds), General External Applications, External Ironmongery CE Standard BS EN 14592:2008 Contents 4.0 x 30mm (Qty 140) 4.0 x 40mm (Qty 100) 4.0 x 50mm (Qty 70) 4.0 x 60mm (Qty 60) 5.0 x 40mm (Qty 80) 5.0 x 50mm (Qty 55) 5.0 x 60mm (Qty 45) 5.0 x 70mm (Qty 30) 5.0 x 80mm (Qty 20) PZ2 38mm Power Bit (Qty 1) Corrosion Rating (1-5) 3 - Urban & industrial areas with a low salt atmosphere Driver Bit Size PZ2 Finish Exterior (Silver Organic) Head Type Double Countersunk with Ribs Included Items PZ2 38mm Impact Power Bit (Qty 1) Indoor/Outdoor Usage Outdoor Material Hardened Steel Pack Qty 600 Point Type Twin-Cut Recess Type Pozi Resistant Type Corrosion-Resistant Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal

Read more less

C2 is a revolutionary high-performance screw designed using modern manufacturing methods and an innovative twin-cut point, ensuring consistent and rapid pick-up while reducing timber splitting. Its superior holding strength in a wide variety of materials provides ultimate performance. This convenient grab pack includes 9 popular sizes for easy selection and organization, plus an impact power bit. • Patented twin cut technology for rapid "pick-up" and reduces timber splitting• Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating• Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw Application Joinery, Carpentry, Timber Construction, Furniture Manufacturing Brand TIMCO CE Standard BS EN 14592:2008 Contents 4.0 x 30mm (Qty 140) 4.0 x 40mm (Qty 100) 4.0 x 50mm (Qty 70) 4.0x 60mm (Qty 60) 5.0 x 40mm (Qty 80) 5.0 x 50mm (Qty 55) 5.0 x 60mm (Qty 45) 5.0 x 70mm (Qty 30) 5.0 x 80mm (Qty 20) PZ2 38mm Power Bit (Qty 1) Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ2 Finish Zinc & Yellow Head Type Double Countersunk Included Items PZ2 38mm Impact Power Bit (Qty 1) Indoor/Outdoor Usage Indoor, Covered Outdoor Lubrication Gleitmo Material Hardened Steel Pack Qty 600 Pack Type Tray Point Type Twin-Cut Recess Type Pozi Resistant Type Corrosion-Resistant Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal

Read more less

C2 is a revolutionary high-performance screw designed using modern manufacturing methods and an innovative twin-cut point, ensuring consistent and rapid pick-up while reducing timber splitting. Its superior holding strength in a wide variety of materials provides ultimate performance. Available in a convenient trade case for easy storage and organization. Containing a variety of popular screw sizes and impact driver bits. • Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw• Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage• Dual angle thread for ultimate performance and exceptionally high pull-out resistance• Patented twin cut technology for rapid "pick-up" and reduces timber splitting• Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length • Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw• Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage• Dual angle thread for ultimate performance and exceptionally high pull-out resistance• Patented twin cut technology for rapid "pick-up" and reduces timber splitting• Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length 3.5 x 16 - 480 quantity3.5 x 25 - 4350quantity4.0 x 30 - 250 quantity4.0 x 40 - 350 quantity4.0 x 50 - 100 quantity5.0 x 60 - 65 quantity5.0 x 70 - 55 quantity5.0 x 80 - 100 quantity5.0 x 100 - 45 quantity38mm Power Bits - 3 quantity Driver Bit Size PZ2 Finish Zinc & Yellow Head Type Double Countersunk Material Hardened Steel Recess Type Pozi Tray Quantity 1798

Read more less

CHUMPFix is the first-of-its-kind fixing solution engineered for fast, secure, and professional installations. Designed to accept two screws for quicker mounting, it's the ideal choice for fitting light fixtures, sockets, switches, and more.Each pack contains 5 CHUMPFix brackets and 10 screws.

Read more less

An ergonomic, durable curved claw hammer manufactured from robust tubular steel with textured rubberised handle. Ideal for a majority of DIY and general purpose applications. • Solid forged head for strength and durability• 1.4mm hardened tubular shaft• Textured grip for increased comfort and shock absorption Brand TIMCO Handle Material Textured Rubber Head Type Curved Head Weight 16oz Head Weight (kg) 0.45 Head Weight (oz) 16 Neck Material Tubular Size (inch) 12 1⁄2  Size (mm) 326 Total L (inch) 12 1⁄2  Total L (mm) 326

Read more less

As well as crimping red, blue and yellow pre-insulated terminals, it also strips & cuts wire between 0.75mm² & 6mm²

Read more less

A high quality cross pein hammer. The two piece design features a shock and break proof fibreglass neck for comfort and control during any task. Ideal for woodworking and metalworking tasks. • Tempered striking faces to prevent chipping• Precision engineered for maximum control and accuracy• Ergonomic anti-slip grip for safety, increased user comfort and long lasting performance• Shock absorbing handle• Reduced and polished head for accurate faster driving to prevent surface marking Brand TIMCO Handle Material Thermoplastic Rubber (TPR) Head Type Cross Pein Head Weight 4oz Head Weight (kg) 0.1 Head Weight (oz) 4 Neck Material Fibreglass Core Size (inch) 12 Size (mm) 299 Total L (inch) 12 Total L (mm) 299

Read more less

A high quality cross pein hammer. The two piece design features a shock and break proof fibreglass neck for comfort and control during any task. Ideal for woodworking and metalworking tasks. • Tempered striking faces to prevent chipping• Precision engineered for maximum control and accuracy• Ergonomic anti-slip grip for safety, increased user comfort and long lasting performance• Shock absorbing handle• Reduced and polished head for accurate faster driving to prevent surface marking Brand TIMCO Handle Material Thermoplastic Rubber (TPR) Head Type Cross Pein Head Weight 8oz Head Weight (kg) 0.2 Head Weight (oz) 8 Neck Material Fibreglass Core Size (inch) 12 Size (mm) 304 Total L (inch) 12 Total L (mm) 304

Read more less

Deck-Tite®’s unique ‘thread pitch to core size ratio’ gives the perfect balance between ease of insertion and pull-out retention whilst increasing the core sheer strength.  Its’ Tri-Lock thread, forms, not cuts, a thread in the material expanding the wood which then relaxes back around the screw ensuring a tight and locked fix. Once driven in the screw will not move, it is secure for good. This Box contains 12 Brackets and 48 Screws.  BENEFITS AND FEATURES ·         Ideal for pressure treated timbers such as decking, fencing and sheds ·         Minimum timber damage on insertion ·         Treated for high corrosion protection ·         Will not unscrew over time ·         Clamps boards fast and easy ·         Awarded the TDCA’s DeckMark®+ accreditation

Read more less

A high quality curved claw hammer, ideal for the toughest jobs and fast nail driving. Made from a two piece design including a fibreglass neck for vibration reduction and breakage resistance. • Drop forged and heat treated for strength and durability• Ergonomic anti-slip grip for safety, increased user comfort and long lasting performance• High strength fibreglass core for vibration resistance and increased user comfort.• Curved claw head for effortless nail and pin removal whilst increasing leverage whilst prying• Shock absorbing handle• Lightweight and balanced Brand TIMCO Handle Material Thermoplastic Rubber (TPR) Head Type Curved Head Weight 16oz Head Weight (kg) 0.45 Head Weight (oz) 16 Neck Material Fibreglass Core Size (inch) 13 1⁄4  Size (mm) 336 Total L (inch) 13 1⁄4  Total L (mm) 336

Read more less

A high quality curved claw hammer, ideal for the toughest jobs and fast nail driving. Made from a two piece design including a fibreglass neck for vibration reduction and breakage resistance. • Drop forged and heat treated for strength and durability• Ergonomic anti-slip grip for safety, increased user comfort and long lasting performance• High strength fibreglass core for vibration resistance and increased user comfort.• Curved claw head for effortless nail and pin removal whilst increasing leverage whilst prying• Shock absorbing handle• Lightweight and balanced Brand TIMCO Handle Material Thermoplastic Rubber (TPR) Head Type Curved Head Weight 20oz Head Weight (kg) 0.56 Head Weight (oz) 20 Neck Material Fibreglass Core Size (inch) 13 1⁄4  Size (mm) 336 Total L (inch) 13 1⁄4  Total L (mm) 336

Read more less

Fire & Acoustic Seals 'Fire Door Foam' is a revolutionary Polyurethane Foam designed to seal the gaps between walls and fire door frames. The product has been extensively tested to achieve 30 and 60 minutes fire resistance in a wide range of construction and building fire stopping applications. • BS 476:Part 22:1987 & BS EN 1634-1• Sound reduction capabilities of up to 60 dB Rw.• Cavity gap filling and perimeter pointing around fire doors• Timber frames, softwood, hardwood and MDF• Compatible with TIMco plastic packers• Certifire Approved CF5839 Certifire Number CF5839 Colour Orange

Read more less

For use with the second fix brad nailer. The cleaned propane and butane gas with a synthetic oil gives a clean combustion and reduces tool wear. Manufactured to European standards and CE approved for consistent quality. • Manufactured to European standards• Cleaned propane and butane gas for cleaner combustion and to improve the working environment• Fully synthetic oil for reduced carbon deposition• High quality propellant to prevent leakage and increase shelf life• Gas filled in accordance with European Regulations (75/324/EWG) Brand TIMCO Pack Qty 2 Pack Type Blister Pack Proper Shipping Name Aerosols, flammable (each not exceeding 1 L capacity)

Read more less

For use with the clipped head first fix nailer. The cleaned propane and butane gas with a synthetic oil gives a clean combustion and reduces tool wear. Manufactured to European standards and CE approved for consistent quality. • Manufactured to European standards• Cleaned propane and butane gas for cleaner combustion and to improve the working environment• Fully synthetic oil for reduced carbon deposition• High quality propellant to prevent leakage and increase shelf life• Gas filled in accordance with European Regulations (75/324/EWG) Brand TIMCO Pack Qty 2 Pack Type Blister Pack Proper Shipping Name Aerosols, flammable (each not exceeding 1 L capacity)

Read more less

Pack contents; M4 Hexagon Nuts - 100 Quantity M4 Flat Washer - 200 Quantity M5 Hexagon Nuts - 100 Quantity M5 Flat Washer - 200 Quantity M6 Hexagon Nuts - 100 Quantity M6 Flat Washer - 200 Quantity M8 Hexagon Nuts - 50 Quantity M8 Flat Washer - 200 Quantity

Read more less

Gorilla Wipes Antibacterial Cleaning Wipes are trusted across various industries, including the MOD and local authorities in the UK, for their superior cleaning performance. Designed to tackle tough messes, these wipes feature a powerful antibacterial formula that kills 99.9% of harmful bacteria, making them ideal for both home and workplace use. Perfect for carpenters, mechanics, medics, plumbers, decorators, and more, these heavy-duty cleaning wipes effectively remove grease, oil, silicone, expanding foam, paint, and other stubborn residues. Each wipe measures 200 x 300mm, ensuring maximum coverage for fast and efficient cleaning.

Read more less

PVC Insulation Tape is a durable, flexible adhesive tape made from Polyvinyl Chloride (PVC). It's widely used for electrical insulation, bundling, and protecting wiring in various industries. Its heat resistance, flexibility, and strong adhesion make it ideal for securing and insulating electrical connections, preventing short circuits, and ensuring safety in both residential and industrial applications. PVC insulation tape is available in a range of colours, making it useful for colour-coding wires and components. Green PVC Insulation Tape - 20m (length) x 19mm (width)  • Material: PVC• Working Temperature: -18℃ to 105℃• Tensile Strength: 22N/10mm• Adhesion to steel – 2.5 N/10mm• Elongation: 125%• Dielectric Strength: 40kV/mm

Read more less

PVC Insulation Tape is a durable, flexible adhesive tape made from Polyvinyl Chloride (PVC). It's widely used for electrical insulation, bundling, and protecting wiring in various industries. Its heat resistance, flexibility, and strong adhesion make it ideal for securing and insulating electrical connections, preventing short circuits, and ensuring safety in both residential and industrial applications. PVC insulation tape is available in a range of colours, making it useful for colour-coding wires and components. Green/Yellow (Earth) PVC Insulation Tape - 20m (length) x 19mm (width)  • Material: PVC• Working Temperature: -18℃ to 105℃• Tensile Strength: 22N/10mm• Adhesion to steel – 2.5 N/10mm• Elongation: 125%• Dielectric Strength: 40kV/mm

Read more less

PVC Insulation Tape is a durable, flexible adhesive tape made from Polyvinyl Chloride (PVC). It's widely used for electrical insulation, bundling, and protecting wiring in various industries. Its heat resistance, flexibility, and strong adhesion make it ideal for securing and insulating electrical connections, preventing short circuits, and ensuring safety in both residential and industrial applications. PVC insulation tape is available in a range of colours, making it useful for colour-coding wires and components. Grey PVC Insulation Tape - 20m (length) x 19mm (width)  • Material: PVC• Working Temperature: -18℃ to 105℃• Tensile Strength: 22N/10mm• Adhesion to steel – 2.5 N/10mm• Elongation: 125%• Dielectric Strength: 40kV/mm

Read more less

A robust steel hand riveter, with a soft grip handle for user comfort. Ideal for DIY and professional use such as engineering, mechanics, roofing construction and more. Powder coated for a long lasting and durable finish. Supplied with 4 nose pieces (to suit 3.0, 3.2, 4.0 & 4.8mm rivets) and a nose piece spanner. • Soft grip handle for user comfort• 4 interchangeable nose pieces and spanner included Brand TIMCO Material Carbon Steel Nose Piece Size 3.0, 3.2, 4.0, 4.8 To Suit Rivets 3.0, 3.2, 4.0 & 4.8

Read more less

Pack contents; M5 Hexagon Nylon Locking Nuts - 150 Quantity M6 Hexagon Nylon Locking Nuts - 100 Quantity M8 Hexagon Nylon Locking Nuts - 100 Quantity M10 Hexagon Nylon Locking Nuts - 50 Quantity

Read more less

A premium grade high strength rubber based contact adhesive suitable for internal and external applications. The easily spreadable liquid formulation allows for an even and uniform bond on large surfaces such as flat roofs, laminate sheets and flooring applications. Ideal for humid and damp environments such as kitchens and bathrooms. • Superior strength fast curing formula• Internal and external• Rapid setting• Low odour• Water resistant• Easy application• Approx. coverage: 0.7m2 Colour Dries Translucent Cure Time 24 hours for full cure Environments Interior & Exterior Open/Working Time 30 Minutes Setting Time 5 Minutes Size 250ml Temperature Resistant (°C) 80 UFI Number DV13-QQ2A-K00V-4Q2K Viscosity High

Read more less

A premium grade high strength rubber based contact adhesive suitable for internal and external applications. The easily spreadable liquid formulation allows for an even and uniform bond on large surfaces such as flat roofs, laminate sheets and flooring applications. Ideal for humid and damp environments such as kitchens and bathrooms. • Superior strength fast curing formula• Internal and external• Rapid setting• Low odour• Water resistant• Easy application• Approx. coverage: 0.7m2 Colour Dries Translucent Cure Time 24 hours for full cure Environments Interior & Exterior Open/Working Time 30 Minutes Setting Time 5 Minutes Size 250ml Temperature Resistant (°C) 80 UFI Number DV13-QQ2A-K00V-4Q2K Viscosity High

Read more less

A premium grade high strength, instant adhesive for internal and external applications. Ideal for : Humid and damp environments such as kitchens and bathrooms. • The low odour formula has been developed to bond with a wide variety of substrates• Suitable for plastic, PVCu, rubber, ceramic, metal, glass, wood, MDF, paper, card, fabric, formica, stone, concrete, cork, linoleum, leather & porcelain• Forms an extremely strong instant bond once the two surfaces have been joined• Heat resistant to +90°C Brand TIMCO Colour Clear Cure Time 24 hours for full cure Environments Interior & Exterior Open/Working Time 5 Minutes Setting Time 2 Minutes Size 500ml Temperature Resistant (°C) 90 UFI Number NS74-VQU1-800Q-WWKV

Read more less

A solvent free wood adhesive based upon the latest hybrid resin technology. Can be used internally or externally giving a high strength, 100% waterproof, impact and temperature resistant bond. Ideal for woodworking, joinery and timber construction. Suitable for water immersed applications. • Fast cure, initial set in just 10 minutes• Conforms to WATT 91 Application General Woodworking, Furniture Assembly Approval WATT 91 BS EN Classification BS EN 204 (D4) Colour White Environments Interior & Exterior Setting Time 10 Minutes Size 1L Strength D4 UFI Number YGC3-XQAS-V00C-JC9C Viscosity Medium

Read more less

A high quality, resin based wood adhesive for all wood bonding. It can be used internally and provides a high strength, impact resistant bond. Ideal for all general woodworking and joinery uses, furniture assembly and household DIY use. Can also be used in short term wet, damp and humid environments such as kitchens, bathrooms, washrooms and covered external applications. Fast cure, initial set in just 10 minutes. Suitable for load bearing work • Fast cure, initial set in just 10 minutes• Suitable for load bearing work as it conforms fully to the BS 14256 BS EN Classification BS EN 204 (D3) & BS EN 14256 Environments Interior Size 1L Strength D3 Viscosity Medium

Read more less