Products

Works in almost anything, without the need to pilot. Screw-Tite® is our multi-purpose screw, designed for load bearing, structural applications.   It works in the majority of materials and without the need to pilot and is proven to outperform competitors’ brands thanks to its unique Tri-Lock threadform, offering the user a screw that is 30% faster and 25% stronger than other market leading names.   SCREW-TITE® BENEFITS: §  CLEAN, FLUSH FINISH – SELF-COUNTERSINKING Underhead ribs self-countersink, whilst a double collar provides extra strength. §  NO MORE JACKING APART OF THE MATERIALS Partial thread prevents jacking & provides exceptional clamping. §  30% FASTER - TRI-LOCK™️ THREAD. Unique trilobular thread provides fast insertion, reduced friction drive & a locked fix. §  25% STRONGER – NO MORE PILOT HOLES. As strong as a HT bolt, the screw should not snap & there’s no need to pilot in most materials. §  2 THREADS, 1 SCREW – TS THREAD SYSTEM §  TWIN THREAD TIP offers an immediate start with a balanced drive. §  SINGLE COARSE THREAD drives easily without reaming for a fast, solid fix with high pull out retention.

Read more less

SHS 60° COUNTERSUNK SCREW● SMALL HEAD AND 3 THORNS TIPThe 60° head and 3 THORNS tip allow easy insertion of the screw into small thickness without creating openings in the timber.● ENLARGED IMPRESSIONCompared to common carpentry screws, it has a larger Torx cavity: TX 25 for Ø4 and 4.5, TX 30 for Ø5. It is the right screw for users requiring strength and precision.● FASTENING ON TONGUE AND GROOVE BOARDSFor fixing beads or small elements, the 3.5 mm diameter version is perfectly suited for application in joints. FIELDS OF USE• tongue-and-groove boards• timber based panels• fibreboard, MDF, HDF and LDF• plated and melamine faced panels• solid timber• glulam (Glued Laminated Timber)• CLT and LVL  d1 3.5mm TX10 L 30mm b 20mm A 10mm Nominal Diameter (d1) 3.5mm Head Diameter 5.75mm Thread Diameter 2.30mm Shank Diameter 2.65mm Pre-Drilling Hole Diameter 2.0mm For more detailed information, visit the Rothoblaas Datasheet page. 

Read more less

Used to secure plasterboard to timber stud work. • Phillips No.2 recess for a positive drive• Bugle head to reduce likelihood of damaging the board surface• 25° super sharp point for ease of penetration• Coarse thread for extreme hold• Fire Classification - A1 Brand TIMCO CE Standard BS EN 14566:2008 Colour Dark Grey Corrosion Rating (1-5) 1 - Clean, dry & low humidity environments Driver Bit Size PH2 Finish Dark Grey Phosphate Head Type Bugle L (mm) 32 Material Carbon Steel Pack Qty 1000 Point Type 25° Sharp Recess Type Phillips Size (mm) 3.5 x 32 Thread Coverage Fully Threaded Thread L (mm) 27 Thread Ø (mm) 3.5 Thread Type Coarse

Read more less

Used to secure plasterboard to drywall and ceiling track systems with a max. of 0.6mm thickness. • Phillips No.2 recess for a positive drive• Bugle head to reduce likelihood of damaging the board surface• 25° super sharp point for ease of penetration• 60° twin-thread offers excellent pull-out values and insertion speed• Fire Classification - A1 Brand TIMCO CE Standard BS EN 14566:2008 Corrosion Rating (1-5) 1 - Clean, dry & low humidity environments Driver Bit Size PH2 Finish Black Phosphate Head Type Bugle Material Carbon Steel MDT (mm) 0.6 Pack Qty 2000 Point Type 25° Sharp Recess Type Phillips Size (mm) 3.5 x 32 Thread Coverage Fully Threaded Thread L (mm) 27 Thread Ø (mm) 3.5 Thread Type Fine

Read more less

Lost-Tite® has been designed to offer a discreet finish in joinery applications such as architrave, skirting and panelling.  Unlike nails and glue, Lost-Tite® provides a mess free, solid fix on decorative timbers even on uneven surfaces.  LOST-TITE® BENEFITS:● THE HIDDEN GEM FOR JOINERYA discreet fix in architrave, skirting and panelling. ● ALMOST HIDDEN FINISH – SMALL, DISCREET HEADPerfect for applications requiring a semi-hidden fix such as architrave, skirting boards and panelling. ● UNDERHEAD THREAD ALLOWS ADJUSTMENT & ELIMINATES EXTRUSIONExtra thread allows minor adjustments of the material against the substrate and prevents the screw becoming visible with shrinkage. ● TRI-LOCK THREAD FOR A SOLID FIX.Unique trilobular thread provides fast insertion, reduced friction drive & a locked fix, ensuring boards stay in place. ● 2 THREADS, 1 SCREW – TS THREAD SYSTEM1. TWIN THREAD TIP breaks the dense surface of the board without damage & with an immediate start.2. SINGLE COARSE THREAD eliminates reaming of the boards and offers a high pull out retention.

Read more less

A specialist screw designed for use in the installation of softwood, hardwood and fibre tongue & groove floorboards. With the Tri-Lock TS thread, the screw will drive straight through the board and into the substrate without the need for a pilot, even in hardwood, whilst the single coarse thread is designed to eliminate ream out of the floorboard, giving a high pull out retention.  In other words, no more squeaky screws. The small head provides a neat, hidden fix and unlike messy glues and nails, the screws can easily be removed when needed. Tongue-Tite® Plus is our 305 stainless-steel version with all the benefits of Tongue-Tite® but with the advantage of protection against corrosion making it suitable for exterior use or in damp environments. Tongue-Tite® Plus is awarded the TDCA CladMark®+ accreditation. TONGUE-TITE® BENEFITS: • THE ORIGINAL AND STILL THE BEST.The easy and removable fix for tongue and groove boards. • ALMOST HIDDEN FINISH – SMALL DISCREEET HEAD.Fixes flush allowing the next board into place with tongue & groove applications or for an almost hidden, face fixed finish. • NO NAILS, NO GLUE, NO MORE MESS.A simple, clean installation that unlike messy glues and nails, can be unscrewed for access or repair. • TRI-LOCK THREAD FOR A SOLID FIX.Unique, trilobular thread provides fast insertion, reduced friction and a locked fix, ensuring the boards stay in place. • HIGH CORE STRENGTH HELPS PREVENT SNAPPING.Specifically developed so the screw will not break as the boards flex under use. • 2 THREADS, 1 SCREW – TS THREAD SYSTEM.1. TWIN THREAD TIP breaks the dense surface of the board without damage & with an immediate start.2. SINGLE COARSE THREAD eliminates reaming of the boards and offers a high pull out retention.

Read more less

Used to secure plasterboard to timber stud work. • Phillips No.2 recess for a positive drive• Bugle head to reduce likelihood of damaging the board surface• 25° super sharp point for ease of penetration• Coarse thread for extreme hold• Fire Classification - A1 Brand TIMCO CE Standard BS EN 14566:2008 Colour Dark Grey Corrosion Rating (1-5) 1 - Clean, dry & low humidity environments Driver Bit Size PH2 Finish Dark Grey Phosphate Head Type Bugle L (mm) 35 Material Carbon Steel Pack Qty 1000 Point Type 25° Sharp Recess Type Phillips Size (mm) 3.5 x 35 Thread Coverage Fully Threaded Thread L (mm) 30 Thread Ø (mm) 3.5 Thread Type Coarse

Read more less

Works in almost anything, without the need to pilot. Screw-Tite® is our multi-purpose screw, designed for load bearing, structural applications.   It works in the majority of materials and without the need to pilot and is proven to outperform competitors’ brands thanks to its unique Tri-Lock threadform, offering the user a screw that is 30% faster and 25% stronger than other market leading names.   SCREW-TITE® BENEFITS: §  CLEAN, FLUSH FINISH – SELF-COUNTERSINKING Underhead ribs self-countersink, whilst a double collar provides extra strength. §  NO MORE JACKING APART OF THE MATERIALS Partial thread prevents jacking & provides exceptional clamping. §  30% FASTER - TRI-LOCK™️ THREAD. Unique trilobular thread provides fast insertion, reduced friction drive & a locked fix. §  25% STRONGER – NO MORE PILOT HOLES. As strong as a HT bolt, the screw should not snap & there’s no need to pilot in most materials. §  2 THREADS, 1 SCREW – TS THREAD SYSTEM §  TWIN THREAD TIP offers an immediate start with a balanced drive. §  SINGLE COARSE THREAD drives easily without reaming for a fast, solid fix with high pull out retention.

Read more less

Used to secure plasterboard to timber stud work. • Phillips No.2 recess for a positive drive• Bugle head to reduce likelihood of damaging the board surface• 25° super sharp point for ease of penetration• Coarse thread for extreme hold• Fire Classification - A1 Brand TIMCO CE Standard BS EN 14566:2008 Colour Dark Grey Corrosion Rating (1-5) 1 - Clean, dry & low humidity environments Driver Bit Size PH2 Finish Dark Grey Phosphate Head Type Bugle L (mm) 38 Material Carbon Steel Pack Qty 1000 Point Type 25° Sharp Recess Type Phillips Size (mm) 3.5 x 38 Thread Coverage Fully Threaded Thread L (mm) 33 Thread Ø (mm) 3.5 Thread Type Coarse

Read more less

Used to secure plasterboard to drywall and ceiling track systems with a max. of 0.6mm thickness. • Phillips No.2 recess for a positive drive• Bugle head to reduce likelihood of damaging the board surface• 25° super sharp point for ease of penetration• 60° twin-thread offers excellent pull-out values and insertion speed• Fire Classification - A1 Brand TIMCO CE Standard BS EN 14566:2008 Corrosion Rating (1-5) 1 - Clean, dry & low humidity environments Driver Bit Size PH2 Finish Black Phosphate Head Type Bugle Material Carbon Steel MDT (mm) 0.6 Pack Qty 1500 Point Type 25° Sharp Recess Type Phillips Size (mm) 3.5 x 32 Thread Coverage Fully Threaded Thread L (mm) 27 Thread Ø (mm) 3.5 Thread Type Fine

Read more less

C2 is a revolutionary high-performance screw designed using modern manufacturing methods. Its superior holding strength in a wide variety of materials provides ultimate performance. • Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw• Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage• Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating• Dual angle thread for ultimate performance and exceptionally high pull-out resistance• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length Application Joinery, Carpentry, Timber Construction, Furniture Manufacturing Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 6 Head Ø (mm) 6.6 Head Type Double Countersunk Indoor/Outdoor Usage Indoor, Covered Outdoor L (inch) 1 1⁄2 L (mm) 40 Lubrication Gleitmo Material Hardened Steel Pack Qty 200 Pack Type Box Point Type Sharp Recess Type Pozi Resistant Type Corrosion-Resistant Size 3.5 x 40 Size (imp.) 6 x 1 1⁄2 Size (mm) 3.5 x 40 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread L (mm) 40 Thread Ø (mm) 3.5 Thread Type 40° Single

Read more less

Works in almost anything, without the need to pilot. Screw-Tite® is our multi-purpose screw, designed for load bearing, structural applications.   It works in the majority of materials and without the need to pilot and is proven to outperform competitors’ brands thanks to its unique Tri-Lock threadform, offering the user a screw that is 30% faster and 25% stronger than other market leading names.   SCREW-TITE® BENEFITS: §  CLEAN, FLUSH FINISH – SELF-COUNTERSINKING Underhead ribs self-countersink, whilst a double collar provides extra strength. §  NO MORE JACKING APART OF THE MATERIALS Partial thread prevents jacking & provides exceptional clamping. §  30% FASTER - TRI-LOCK™️ THREAD. Unique trilobular thread provides fast insertion, reduced friction drive & a locked fix. §  25% STRONGER – NO MORE PILOT HOLES. As strong as a HT bolt, the screw should not snap & there’s no need to pilot in most materials. §  2 THREADS, 1 SCREW – TS THREAD SYSTEM §  TWIN THREAD TIP offers an immediate start with a balanced drive. §  SINGLE COARSE THREAD drives easily without reaming for a fast, solid fix with high pull out retention.

Read more less

SHS 60° COUNTERSUNK SCREW● SMALL HEAD AND 3 THORNS TIPThe 60° head and 3 THORNS tip allow easy insertion of the screw into small thickness without creating openings in the timber.● OUTDOOR ON ACID WOODMartensitic stainless steel. This stainless steels offers the highest mechanical performance compared to the other available stainless steels. Suitable for outdoor applications and on acid wood, but away from corrosive agents (chlorides, sulphides, etc.).● SMALL ELEMENTS FASTENINGThe smaller diameter versions are ideal for fixing beads or small elements, the 3.5 mm diameter version is perfectly suited for fastening tongue-and-groove boards. FIELDS OF USE• timber based panels• solid timber• glulam (Glued Laminated Timber)• CLT, LVL• high-density woods and acid woods  d1 3.5mm TX10 L 40mm b 26mm A 14mm Nominal Diameter (d1) 3.5mm Head Diameter 5.75mm Thread Diameter 2.15mm Shank Diameter 2.50mm Pre-Drilling Hole Diameter 2.0mm For more detailed information, visit the Rothoblaas Datasheet page. 

Read more less

SHS 60° COUNTERSUNK SCREW● SMALL HEAD AND 3 THORNS TIPThe 60° head and 3 THORNS tip allow easy insertion of the screw into small thickness without creating openings in the timber.● ENLARGED IMPRESSIONCompared to common carpentry screws, it has a larger Torx cavity: TX 25 for Ø4 and 4.5, TX 30 for Ø5. It is the right screw for users requiring strength and precision.● FASTENING ON TONGUE AND GROOVE BOARDSFor fixing beads or small elements, the 3.5 mm diameter version is perfectly suited for application in joints. FIELDS OF USE• tongue-and-groove boards• timber based panels• fibreboard, MDF, HDF and LDF• plated and melamine faced panels• solid timber• glulam (Glued Laminated Timber)• CLT and LVL  d1 3.5mm TX10 L 40mm b 26mm A 14mm Nominal Diameter (d1) 3.5mm Head Diameter 5.75mm Thread Diameter 2.30mm Shank Diameter 2.65mm Pre-Drilling Hole Diameter 2.0mm For more detailed information, visit the Rothoblaas Datasheet page. 

Read more less

Used to secure plasterboard to timber stud work. • Phillips No.2 recess for a positive drive• Bugle head to reduce likelihood of damaging the board surface• 25° super sharp point for ease of penetration• Coarse thread for extreme hold• Fire Classification - A1 Brand TIMCO CE Standard BS EN 14566:2008 Colour Dark Grey Corrosion Rating (1-5) 1 - Clean, dry & low humidity environments Driver Bit Size PH2 Finish Dark Grey Phosphate Head Type Bugle L (mm) 42 Material Carbon Steel Pack Qty 1000 Point Type 25° Sharp Recess Type Phillips Size (mm) 3.5 x 42 Thread Coverage Fully Threaded Thread L (mm) 37 Thread Ø (mm) 3.5 Thread Type Coarse

Read more less

A specialised fastener for fixing tongue and groove floorboards and panelling. It creates a secure and hidden fixture, allowing for a flush fit with the next board. C2 is a revolutionary high-performance screw designed using modern manufacturing methods and an innovative twin-cut point, ensuring consistent and rapid pick-up while reducing timber splitting. • Reduced head for concealed countersinking• Plain shank for pulling the two substrates together without manual clamping• Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating• Dual angle thread for ultimate performance and exceptionally high pull-out resistance• Patented twin cut technology for rapid "pick-up" and reduces timber splitting Application Tongue and Groove Boards and Panelling Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size TX10 Finish Zinc & Yellow Head Type Reduced Countersunk Included Items TX10 25mm Bit (Qty 1) Indoor/Outdoor Usage Indoor, Covered Outdoor L (inch) 1 3⁄4  L (mm) 45 Material Hardened Steel Pack Qty 200 Pack Type Box Point Type Twin-Cut Recess Type TX Drive Resistant Type Corrosion-Resistant Size (imp.) 6 x 1 3⁄4  Size (mm) 3.5 x 45 Substrates Hardwood, Softwood, Chipboard Thread L (mm) 30 Thread Ø (mm) 3.5 Thread Type 40° Single

Read more less

A specialised fastener for fixing tongue and groove floorboards and panelling. It creates a secure and hidden fixture, allowing for a flush fit with the next board. C2 is a revolutionary high-performance screw designed using modern manufacturing methods and an innovative twin-cut point, ensuring consistent and rapid pick-up while reducing timber splitting. • Reduced head for concealed countersinking• Plain shank for pulling the two substrates together without manual clamping• Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating• Dual angle thread for ultimate performance and exceptionally high pull-out resistance• Patented twin cut technology for rapid "pick-up" and reduces timber splitting Application Tongue and Groove Boards and Panelling Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size TX10 Finish Zinc & Yellow Head Type Reduced Countersunk Included Items TX10 25mm Bit (Qty 1) Indoor/Outdoor Usage Indoor, Covered Outdoor L (inch) 1 3⁄4  L (mm) 45 Material Hardened Steel Pack Qty 350 Pack Type Tub Point Type Twin-Cut Recess Type TX Drive Resistant Type Corrosion-Resistant Size (imp.) 6 x 1 3⁄4  Size (mm) 3.5 x 45 Substrates Hardwood, Softwood, Chipboard Thread L (mm) 30 Thread Ø (mm) 3.5 Thread Type 40° Single

Read more less

Used to secure plasterboard to timber stud work. • Phillips No.2 recess for a positive drive• Bugle head to reduce likelihood of damaging the board surface• 25° super sharp point for ease of penetration• Coarse thread for extreme hold• Fire Classification - A1 Brand TIMCO CE Standard BS EN 14566:2008 Colour Dark Grey Corrosion Rating (1-5) 1 - Clean, dry & low humidity environments Driver Bit Size PH2 Finish Dark Grey Phosphate Head Type Bugle L (mm) 45 Material Carbon Steel Pack Qty 1000 Point Type 25° Sharp Recess Type Phillips Size (mm) 3.5 x 45 Thread Coverage Fully Threaded Thread L (mm) 40 Thread Ø (mm) 3.5 Thread Type Coarse

Read more less

Lost-Tite® has been designed to offer a discreet finish in joinery applications such as architrave, skirting and panelling.  Unlike nails and glue, Lost-Tite® provides a mess free, solid fix on decorative timbers even on uneven surfaces.  LOST-TITE® BENEFITS:● THE HIDDEN GEM FOR JOINERYA discreet fix in architrave, skirting and panelling. ● ALMOST HIDDEN FINISH – SMALL, DISCREET HEADPerfect for applications requiring a semi-hidden fix such as architrave, skirting boards and panelling. ● UNDERHEAD THREAD ALLOWS ADJUSTMENT & ELIMINATES EXTRUSIONExtra thread allows minor adjustments of the material against the substrate and prevents the screw becoming visible with shrinkage. ● TRI-LOCK THREAD FOR A SOLID FIX.Unique trilobular thread provides fast insertion, reduced friction drive & a locked fix, ensuring boards stay in place. ● 2 THREADS, 1 SCREW – TS THREAD SYSTEM1. TWIN THREAD TIP breaks the dense surface of the board without damage & with an immediate start.2. SINGLE COARSE THREAD eliminates reaming of the boards and offers a high pull out retention.

Read more less

A specialist screw designed for use in the installation of softwood, hardwood and fibre tongue & groove floorboards. With the Tri-Lock TS thread, the screw will drive straight through the board and into the substrate without the need for a pilot, even in hardwood, whilst the single coarse thread is designed to eliminate ream out of the floorboard, giving a high pull out retention.  In other words, no more squeaky screws. The small head provides a neat, hidden fix and unlike messy glues and nails, the screws can easily be removed when needed. Tongue-Tite® Plus is our 305 stainless-steel version with all the benefits of Tongue-Tite® but with the advantage of protection against corrosion making it suitable for exterior use or in damp environments. Tongue-Tite® Plus is awarded the TDCA CladMark®+ accreditation. TONGUE-TITE® BENEFITS: • THE ORIGINAL AND STILL THE BEST.The easy and removable fix for tongue and groove boards. • ALMOST HIDDEN FINISH – SMALL DISCREEET HEAD.Fixes flush allowing the next board into place with tongue & groove applications or for an almost hidden, face fixed finish. • NO NAILS, NO GLUE, NO MORE MESS.A simple, clean installation that unlike messy glues and nails, can be unscrewed for access or repair. • TRI-LOCK THREAD FOR A SOLID FIX.Unique, trilobular thread provides fast insertion, reduced friction and a locked fix, ensuring the boards stay in place. • HIGH CORE STRENGTH HELPS PREVENT SNAPPING.Specifically developed so the screw will not break as the boards flex under use. • 2 THREADS, 1 SCREW – TS THREAD SYSTEM.1. TWIN THREAD TIP breaks the dense surface of the board without damage with an immediate start.2. SINGLE COARSE THREAD eliminates reaming of the boards and offers a high pull out retention.

Read more less

A specialist screw designed for use in the installation of softwood, hardwood and fibre tongue & groove floorboards. With the Tri-Lock TS thread, the screw will drive straight through the board and into the substrate without the need for a pilot, even in hardwood, whilst the single coarse thread is designed to eliminate ream out of the floorboard, giving a high pull out retention.  In other words, no more squeaky screws. The small head provides a neat, hidden fix and unlike messy glues and nails, the screws can easily be removed when needed. TONGUE-TITE® BENEFITS: • THE ORIGINAL AND STILL THE BEST.The easy and removable fix for tongue and groove boards. • ALMOST HIDDEN FINISH – SMALL DISCREEET HEAD.Fixes flush allowing the next board into place with tongue & groove applications or for an almost hidden, face fixed finish. • NO NAILS, NO GLUE, NO MORE MESS.A simple, clean installation that unlike messy glues and nails, can be unscrewed for access or repair. • TRI-LOCK THREAD FOR A SOLID FIX.Unique, trilobular thread provides fast insertion, reduced friction and a locked fix, ensuring the boards stay in place. • HIGH CORE STRENGTH HELPS PREVENT SNAPPING.Specifically developed so the screw will not break as the boards flex under use. • 2 THREADS, 1 SCREW – TS THREAD SYSTEM.1. TWIN THREAD TIP breaks the dense surface of the board without damage & with an immediate start.2. SINGLE COARSE THREAD eliminates reaming of the boards and offers a high pull out retention.

Read more less

Lost-Tite® has been designed to offer a discreet finish in joinery applications such as architrave, skirting and panelling.  Unlike nails and glue, Lost-Tite® provides a mess free, solid fix on decorative timbers even on uneven surfaces.  LOST-TITE® BENEFITS:● THE HIDDEN GEM FOR JOINERYA discreet fix in architrave, skirting and panelling. ● ALMOST HIDDEN FINISH – SMALL, DISCREET HEADPerfect for applications requiring a semi-hidden fix such as architrave, skirting boards and panelling. ● UNDERHEAD THREAD ALLOWS ADJUSTMENT & ELIMINATES EXTRUSIONExtra thread allows minor adjustments of the material against the substrate and prevents the screw becoming visible with shrinkage. ● TRI-LOCK THREAD FOR A SOLID FIX.Unique trilobular thread provides fast insertion, reduced friction drive & a locked fix, ensuring boards stay in place. ● 2 THREADS, 1 SCREW – TS THREAD SYSTEM1. TWIN THREAD TIP breaks the dense surface of the board without damage & with an immediate start.2. SINGLE COARSE THREAD eliminates reaming of the boards and offers a high pull out retention.

Read more less

A specialist screw designed for use in the installation of softwood, hardwood and fibre tongue & groove floorboards. With the Tri-Lock TS thread, the screw will drive straight through the board and into the substrate without the need for a pilot, even in hardwood, whilst the single coarse thread is designed to eliminate ream out of the floorboard, giving a high pull out retention.  In other words, no more squeaky screws. The small head provides a neat, hidden fix and unlike messy glues and nails, the screws can easily be removed when needed. Tongue-Tite® Plus is our 305 stainless-steel version with all the benefits of Tongue-Tite® but with the advantage of protection against corrosion making it suitable for exterior use or in damp environments. Tongue-Tite® Plus is awarded the TDCA CladMark®+ accreditation. TONGUE-TITE® BENEFITS: • THE ORIGINAL AND STILL THE BEST.The easy and removable fix for tongue and groove boards. • ALMOST HIDDEN FINISH – SMALL DISCREEET HEAD.Fixes flush allowing the next board into place with tongue & groove applications or for an almost hidden, face fixed finish. • NO NAILS, NO GLUE, NO MORE MESS.A simple, clean installation that unlike messy glues and nails, can be unscrewed for access or repair. • TRI-LOCK THREAD FOR A SOLID FIX.Unique, trilobular thread provides fast insertion, reduced friction and a locked fix, ensuring the boards stay in place. • HIGH CORE STRENGTH HELPS PREVENT SNAPPING.Specifically developed so the screw will not break as the boards flex under use. • 2 THREADS, 1 SCREW – TS THREAD SYSTEM.1. TWIN THREAD TIP breaks the dense surface of the board without damage with an immediate start.2. SINGLE COARSE THREAD eliminates reaming of the boards and offers a high pull out retention.

Read more less

C2 is a revolutionary high-performance screw designed using modern manufacturing methods. Its superior holding strength in a wide variety of materials provides ultimate performance. • Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw• Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage• Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating• Dual angle thread for ultimate performance and exceptionally high pull-out resistance• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length Application Joinery, Carpentry, Timber Construction, Furniture Manufacturing Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 6 Head Ø (mm) 6.6 Head Type Double Countersunk Indoor/Outdoor Usage Indoor, Covered Outdoor L (inch) 1 1⁄2 L (mm) 40 Lubrication Gleitmo Material Hardened Steel Pack Qty 200 Pack Type Box Point Type Sharp Recess Type Pozi Resistant Type Corrosion-Resistant Size 3.5 x 50 Size (imp.) 6 x 2 Size (mm) 3.5 x 50 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread L (mm) 45 Thread Ø (mm) 3.5 Thread Type 40° Single

Read more less

Used to secure plasterboard to timber stud work. • Phillips No.2 recess for a positive drive• Bugle head to reduce likelihood of damaging the board surface• 25° super sharp point for ease of penetration• Coarse thread for extreme hold• Fire Classification - A1 Brand TIMCO CE Standard BS EN 14566:2008 Colour Dark Grey Corrosion Rating (1-5) 1 - Clean, dry & low humidity environments Driver Bit Size PH2 Finish Dark Grey Phosphate Head Type Bugle L (mm) 50 Material Carbon Steel Pack Qty 1000 Point Type 25° Sharp Recess Type Phillips Size (mm) 3.5 x 50 Thread Coverage Fully Threaded Thread L (mm) 45 Thread Ø (mm) 3.5 Thread Type Coarse

Read more less

Works in almost anything, without the need to pilot. Screw-Tite® is our multi-purpose screw, designed for load bearing, structural applications.   It works in the majority of materials and without the need to pilot and is proven to outperform competitors’ brands thanks to its unique Tri-Lock threadform, offering the user a screw that is 30% faster and 25% stronger than other market leading names.   SCREW-TITE® BENEFITS: §  CLEAN, FLUSH FINISH – SELF-COUNTERSINKING Underhead ribs self-countersink, whilst a double collar provides extra strength. §  NO MORE JACKING APART OF THE MATERIALS Partial thread prevents jacking & provides exceptional clamping. §  30% FASTER - TRI-LOCK™️ THREAD. Unique trilobular thread provides fast insertion, reduced friction drive & a locked fix. §  25% STRONGER – NO MORE PILOT HOLES. As strong as a HT bolt, the screw should not snap & there’s no need to pilot in most materials. §  2 THREADS, 1 SCREW – TS THREAD SYSTEM §  TWIN THREAD TIP offers an immediate start with a balanced drive. §  SINGLE COARSE THREAD drives easily without reaming for a fast, solid fix with high pull out retention.

Read more less

SHS 60° COUNTERSUNK SCREW● SMALL HEAD AND 3 THORNS TIPThe 60° head and 3 THORNS tip allow easy insertion of the screw into small thickness without creating openings in the timber.● OUTDOOR ON ACID WOODMartensitic stainless steel. This stainless steels offers the highest mechanical performance compared to the other available stainless steels. Suitable for outdoor applications and on acid wood, but away from corrosive agents (chlorides, sulphides, etc.).● SMALL ELEMENTS FASTENINGThe smaller diameter versions are ideal for fixing beads or small elements, the 3.5 mm diameter version is perfectly suited for fastening tongue-and-groove boards. FIELDS OF USE• timber based panels• solid timber• glulam (Glued Laminated Timber)• CLT, LVL• high-density woods and acid woods  d1 3.5mm TX10 L 50mm b 34mm A 16mm Nominal Diameter (d1) 3.5mm Head Diameter 5.75mm Thread Diameter 2.15mm Shank Diameter 2.50mm Pre-Drilling Hole Diameter 2.0mm   For more detailed information, visit the Rothoblaas Datasheet page. 

Read more less

SHS 60° COUNTERSUNK SCREW● SMALL HEAD AND 3 THORNS TIPThe 60° head and 3 THORNS tip allow easy insertion of the screw into small thickness without creating openings in the timber.● ENLARGED IMPRESSIONCompared to common carpentry screws, it has a larger Torx cavity: TX 25 for Ø4 and 4.5, TX 30 for Ø5. It is the right screw for users requiring strength and precision.● FASTENING ON TONGUE AND GROOVE BOARDSFor fixing beads or small elements, the 3.5 mm diameter version is perfectly suited for application in joints. FIELDS OF USE• tongue-and-groove boards• timber based panels• fibreboard, MDF, HDF and LDF• plated and melamine faced panels• solid timber• glulam (Glued Laminated Timber)• CLT and LVL  d1 3.5mm TX10 L 50mm b 34mm A 16mm Nominal Diameter (d1) 3.5mm Head Diameter 5.75mm Thread Diameter 2.30mm Shank Diameter 2.65mm Pre-Drilling Hole Diameter 2.0mm For more detailed information, visit the Rothoblaas Datasheet page. 

Read more less

Used to secure plasterboard to timber stud work. • Phillips No.2 recess for a positive drive• Bugle head to reduce likelihood of damaging the board surface• 25° super sharp point for ease of penetration• Coarse thread for extreme hold• Fire Classification - A1 Brand TIMCO CE Standard BS EN 14566:2008 Colour Dark Grey Corrosion Rating (1-5) 1 - Clean, dry & low humidity environments Driver Bit Size PH2 Finish Dark Grey Phosphate Head Type Bugle L (mm) 55 Material Carbon Steel Pack Qty 500 Point Type 25° Sharp Recess Type Phillips Size (mm) 3.5 x 55 Thread Coverage Fully Threaded Thread L (mm) 50 Thread Ø (mm) 3.5 Thread Type Coarse

Read more less

Used to secure plasterboard to timber stud work. • Phillips No.2 recess for a positive drive• Bugle head to reduce likelihood of damaging the board surface• 25° super sharp point for ease of penetration• Coarse thread for extreme hold• Fire Classification - A1 Brand TIMCO CE Standard BS EN 14566:2008 Colour Dark Grey Corrosion Rating (1-5) 1 - Clean, dry & low humidity environments Driver Bit Size PH2 Finish Dark Grey Phosphate Head Type Bugle L (mm) 60 Material Carbon Steel Pack Qty 500 Point Type 25° Sharp Recess Type Phillips Size (mm) 3.5 x 60 Thread Coverage Fully Threaded Thread L (mm) 50 Thread Ø (mm) 3.5 Thread Type Coarse

Read more less

SHS 60° COUNTERSUNK SCREW● SMALL HEAD AND 3 THORNS TIPThe 60° head and 3 THORNS tip allow easy insertion of the screw into small thickness without creating openings in the timber.● OUTDOOR ON ACID WOODMartensitic stainless steel. This stainless steels offers the highest mechanical performance compared to the other available stainless steels. Suitable for outdoor applications and on acid wood, but away from corrosive agents (chlorides, sulphides, etc.).● SMALL ELEMENTS FASTENINGThe smaller diameter versions are ideal for fixing beads or small elements, the 3.5 mm diameter version is perfectly suited for fastening tongue-and-groove boards. FIELDS OF USE• timber based panels• solid timber• glulam (Glued Laminated Timber)• CLT, LVL• high-density woods and acid woods  d1 3.5mm TX10 L 60mm b 40mm A 20mm Nominal Diameter (d1) 3.5mm Head Diameter 5.75mm Thread Diameter 2.15mm Shank Diameter 2.50mm Pre-Drilling Hole Diameter 2.0mm   For more detailed information, visit the Rothoblaas Datasheet page. 

Read more less

SHS 60° COUNTERSUNK SCREW● SMALL HEAD AND 3 THORNS TIPThe 60° head and 3 THORNS tip allow easy insertion of the screw into small thickness without creating openings in the timber.● ENLARGED IMPRESSIONCompared to common carpentry screws, it has a larger Torx cavity: TX 25 for Ø4 and 4.5, TX 30 for Ø5. It is the right screw for users requiring strength and precision.● FASTENING ON TONGUE AND GROOVE BOARDSFor fixing beads or small elements, the 3.5 mm diameter version is perfectly suited for application in joints. FIELDS OF USE• tongue-and-groove boards• timber based panels• fibreboard, MDF, HDF and LDF• plated and melamine faced panels• solid timber• glulam (Glued Laminated Timber)• CLT and LVL  d1 3.5mm TX10 L 60mm b 40mm A 20mm Nominal Diameter (d1) 3.5mm Head Diameter 5.75mm Thread Diameter 2.30mm Shank Diameter 2.65mm Pre-Drilling Hole Diameter 2.0mm For more detailed information, visit the Rothoblaas Datasheet page. 

Read more less

A specialist screw designed for use in the installation of softwood, hardwood and fibre tongue & groove floorboards. With the Tri-Lock TS thread, the screw will drive straight through the board and into the substrate without the need for a pilot, even in hardwood, whilst the single coarse thread is designed to eliminate ream out of the floorboard, giving a high pull out retention.  In other words, no more squeaky screws. The small head provides a neat, hidden fix and unlike messy glues and nails, the screws can easily be removed when needed. Tongue-Tite® Plus is our 305 stainless-steel version with all the benefits of Tongue-Tite® but with the advantage of protection against corrosion making it suitable for exterior use or in damp environments. Tongue-Tite® Plus is awarded the TDCA CladMark®+ accreditation. TONGUE-TITE® BENEFITS: • THE ORIGINAL AND STILL THE BEST.The easy and removable fix for tongue and groove boards. • ALMOST HIDDEN FINISH – SMALL DISCREEET HEAD.Fixes flush allowing the next board into place with tongue & groove applications or for an almost hidden, face fixed finish. • NO NAILS, NO GLUE, NO MORE MESS.A simple, clean installation that unlike messy glues and nails, can be unscrewed for access or repair. • TRI-LOCK THREAD FOR A SOLID FIX.Unique, trilobular thread provides fast insertion, reduced friction and a locked fix, ensuring the boards stay in place. • HIGH CORE STRENGTH HELPS PREVENT SNAPPING.Specifically developed so the screw will not break as the boards flex under use. • 2 THREADS, 1 SCREW – TS THREAD SYSTEM.1. TWIN THREAD TIP breaks the dense surface of the board without damage with an immediate start.2. SINGLE COARSE THREAD eliminates reaming of the boards and offers a high pull out retention. Unique, trilobular thread provides fast insertion, reduced friction and a locked fix, ensuring the boards stay in place. §  HIGH CORE STRENGTH HELPS PREVENT SNAPPING. Specifically developed so the screw will not break as the boards flex under use. §  2 THREADS, 1 SCREW – TS THREAD SYSTEM. 1.       TWIN THREAD TIP breaks the dense surface of the board without damage & with an immediate start.  2.       SINGLE COARSE THREAD eliminates reaming of the boards and offers a high pull out retention.

Read more less

Engineered for performance and reliability, this 3.5mm x 52mm HSS Stub Drill Bit is crafted from high-speed steel and manufactured to DIN 1897 standards. The stub length design offers greater rigidity and reduced deflection, making it perfect for accurate hole drilling in metal, wood, and plastic. Key Features:✅ 3.5mm diameter, approx. 52mm overall length✅ Stub length for greater control and precision✅ Made from high-quality High-Speed Steel (HSS)✅ 118° split point for easy centering and fast starts✅ Steam tempered blue finish for enhanced durability and heat resistance✅ Precision ground flutes for smooth chip removal✅ Conforms to DIN 1897 standard Ideal for use in hand drills, drill presses, and CNC machines, this stub drill bit is a dependable choice for engineers, tradespeople, and DIY users who demand precision and long tool life.

Read more less

Engineered for performance and reliability, this 3.6mm x 52mm HSS Stub Drill Bit is crafted from high-speed steel and manufactured to DIN 1897 standards. The stub length design offers greater rigidity and reduced deflection, making it perfect for accurate hole drilling in metal, wood, and plastic. Key Features:✅ 3.6mm diameter, approx. 52mm overall length✅ Stub length for greater control and precision✅ Made from high-quality High-Speed Steel (HSS)✅ 118° split point for easy centering and fast starts✅ Steam tempered blue finish for enhanced durability and heat resistance✅ Precision ground flutes for smooth chip removal✅ Conforms to DIN 1897 standard Ideal for use in hand drills, drill presses, and CNC machines, this stub drill bit is a dependable choice for engineers, tradespeople, and DIY users who demand precision and long tool life.

Read more less

Insulation Colour Blue Wire Size mm² 1.5 - 2.5 Stud Size 3.7mm Material (Insulation) PVC Material (Terminal) Copper Material (Plating) Tin Maximum Temperature +75oC ROHS Compliant Yes   High-quality pre-insulated fork crimp terminals with electro-tin plating for excellent conductivity. Ideal for various applications including electrical manufacturing and automotive wire harnesses.

Read more less

Insulation Colour Blue Wire Size mm² 1.5 - 2.5 Stud Size 3.7mm Material (Insulation) PVC Material (Terminal) Copper Material (Plating) Tin Maximum Temperature 75oC ROHS Compliant Yes   Pre-insulated ring terminals are electrical connectors for various wiring and electrical applications. These terminals are typically used to terminate or connect wires to electrical components such as switches, circuit breakers, relays, or other devices, and they provide electrical insulation to prevent short circuits or electrical hazards. 

Read more less

Insulation Colour Red Wire Size mm² 0.5 - 1.5 Stud Size 3.7mm Material (Insulation) PVC Material (Terminal) Copper Material (Plating) Tin Maximum Temperature +75oC ROHS Compliant Yes   High-quality pre-insulated fork crimp terminals with electro-tin plating for excellent conductivity. Ideal for various applications including electrical manufacturing and automotive wire harnesses.

Read more less

Insulation Colour Red Wire Size mm² 0.5 - 1.5 Stud Size 3.7mm Material (Insulation) PVC Material (Terminal) Copper Material (Plating) Tin Maximum Temperature 75oC ROHS Compliant Yes   Pre-insulated ring terminals are electrical connectors for various wiring and electrical applications. These terminals are typically used to terminate or connect wires to electrical components such as switches, circuit breakers, relays, or other devices, and they provide electrical insulation to prevent short circuits or electrical hazards. 

Read more less

Insulation Colour Yellow Wire Size mm² 4 - 6 Stud Size 3.7mm Material (Insulation) PVC Material (Terminal) Copper Material (Plating) Tin Maximum Temperature +75oC ROHS Compliant Yes   High-quality pre-insulated fork crimp terminals with electro-tin plating for excellent conductivity. Ideal for various applications including electrical manufacturing and automotive wire harnesses.

Read more less

Insulation Colour Yellow Wire Size mm² 4 - 6 Stud Size 3.7mm Material (Insulation) PVC Material (Terminal) Copper Material (Plating) Tin Maximum Temperature 75oC ROHS Compliant Yes   Pre-insulated ring terminals are electrical connectors for various wiring and electrical applications. These terminals are typically used to terminate or connect wires to electrical components such as switches, circuit breakers, relays, or other devices, and they provide electrical insulation to prevent short circuits or electrical hazards. 

Read more less

A light duty metal to metal screw with a phillips recess used for interior applications. • Fire Classification - A1 CE Standard BS EN 14566:2008, BS EN 10666:2008 Corrosion Rating (1-5) 1 - Clean, dry & low humidity environments Driver Bit Size PH2 Finish Zinc Head Type Pan Material Carbon Steel MDT (mm) 2.5 Pack Qty 1000 Pack Type Box Point Type Self-Drilling Recess Type Phillips Size (mm) 3.9 x 11 Substrates Steel Thread Type Self-Tapping

Read more less

MDF-Tite® is designed to eliminate blistering when installing MDF boards. The unique Tri-Lock TS thread offers both a single and a twin thread on one screw providing an easy, balanced start which teamed with additional wax coating offers fast insertion with reduced friction. The coarse single thread ensures boards are clamped quickly and firmly and will not pull apart under load to suit the most common boards and can be used on other fibre boards, such as Chipboard, Hardboard, Plywood, P5 Boards, Strand Board, Loft Panels and OSB2/OSB3. ● CLAMPS FAST WITHOUT REAMING.Ideal for use in MDF, all fibreboards and chipboard ● PREVENTS JACKING APART OF MATERIALS.Partial thread prevents jacking of the materials on installation. ● NO SNAPPING & NO PILOT, ULYTRA STRONG CORE.Ultra-strong, the screws will not break as materials flex or expand under use and there’s no need to pilot. ● SOLID CLAMPING WITHOUT REAMING.Unique threadform clamps boards fast without reaming and ensures they will not pull apart under load. ● FAST, EASY INSERTION WITH REDUCED TORQUE.Additional wax coating reduces torque for faster insertion with a quick pick up. ● ELIMINATES BLISTERING & DAMAGE TO MATERIAL.Specialist thread core eliminates blistering and damage to the material on insertion.

Read more less

Designed for attaching dense board to timber stud work. The super sharp point and high low thread is specially designed for an excellent fixing into timber. • Phillips No.2 recess for a positive drive• Reduced countersunk head for improved countersinking into the dense board• High-Low thread for increased pull-out value into both timber and thin sheet metal• Coarse thread for extreme hold• 25° super sharp point for ease of penetration• Fire Classification - A1 CE Standard BS EN 14566:2008 Corrosion Rating (1-5) 1 - Clean, dry & low humidity environments Driver Bit Size PH2 Finish Black Phosphate Head Type Reduced Countersunk Material Carbon Steel Pack Qty 1000 Point Type 25° Sharp Recess Type Phillips Size (mm) 3.9 x 30 Thread L (mm) 25 Thread Type High-Low

Read more less

MDF-Tite® is designed to eliminate blistering when installing MDF boards. The unique Tri-Lock TS thread offers both a single and a twin thread on one screw providing an easy, balanced start which teamed with additional wax coating offers fast insertion with reduced friction. The coarse single thread ensures boards are clamped quickly and firmly and will not pull apart under load to suit the most common boards and can be used on other fibre boards, such as Chipboard, Hardboard, Plywood, P5 Boards, Strand Board, Loft Panels and OSB2/OSB3. ● CLAMPS FAST WITHOUT REAMING.Ideal for use in MDF, all fibreboards and chipboard ● PREVENTS JACKING APART OF MATERIALS.Partial thread prevents jacking of the materials on installation. ● NO SNAPPING & NO PILOT, ULYTRA STRONG CORE.Ultra-strong, the screws will not break as materials flex or expand under use and there’s no need to pilot. ● SOLID CLAMPING WITHOUT REAMING.Unique threadform clamps boards fast without reaming and ensures they will not pull apart under load. ● FAST, EASY INSERTION WITH REDUCED TORQUE.Additional wax coating reduces torque for faster insertion with a quick pick up. ● ELIMINATES BLISTERING & DAMAGE TO MATERIAL.Specialist thread core eliminates blistering and damage to the material on insertion.

Read more less

MDF-Tite® is designed to eliminate blistering when installing MDF boards. The unique Tri-Lock TS thread offers both a single and a twin thread on one screw providing an easy, balanced start which teamed with additional wax coating offers fast insertion with reduced friction. The coarse single thread ensures boards are clamped quickly and firmly and will not pull apart under load to suit the most common boards and can be used on other fibre boards, such as Chipboard, Hardboard, Plywood, P5 Boards, Strand Board, Loft Panels and OSB2/OSB3. ● CLAMPS FAST WITHOUT REAMING.Ideal for use in MDF, all fibreboards and chipboard ● PREVENTS JACKING APART OF MATERIALS.Partial thread prevents jacking of the materials on installation. ● NO SNAPPING & NO PILOT, ULYTRA STRONG CORE.Ultra-strong, the screws will not break as materials flex or expand under use and there’s no need to pilot. ● SOLID CLAMPING WITHOUT REAMING.Unique threadform clamps boards fast without reaming and ensures they will not pull apart under load. ● FAST, EASY INSERTION WITH REDUCED TORQUE.Additional wax coating reduces torque for faster insertion with a quick pick up. ● ELIMINATES BLISTERING & DAMAGE TO MATERIAL.Specialist thread core eliminates blistering and damage to the material on insertion.

Read more less

Designed for attaching dense board to timber stud work. The super sharp point and high low thread is specially designed for an excellent fixing into timber. • Phillips No.2 recess for a positive drive• Reduced countersunk head for improved countersinking into the dense board• High-Low thread for increased pull-out value into both timber and thin sheet metal• Coarse thread for extreme hold• 25° super sharp point for ease of penetration• Fire Classification - A1 CE Standard BS EN 14566:2008 Corrosion Rating (1-5) 1 - Clean, dry & low humidity environments Driver Bit Size PH2 Finish Black Phosphate Head Type Reduced Countersunk Material Carbon Steel Pack Qty 1000 Point Type 25° Sharp Recess Type Phillips Size (mm) 3.9 x 45 Thread L (mm) 40 Thread Type High-Low

Read more less

MDF-Tite® is designed to eliminate blistering when installing MDF boards. The unique Tri-Lock TS thread offers both a single and a twin thread on one screw providing an easy, balanced start which teamed with additional wax coating offers fast insertion with reduced friction. The coarse single thread ensures boards are clamped quickly and firmly and will not pull apart under load to suit the most common boards and can be used on other fibre boards, such as Chipboard, Hardboard, Plywood, P5 Boards, Strand Board, Loft Panels and OSB2/OSB3. ● CLAMPS FAST WITHOUT REAMING.Ideal for use in MDF, all fibreboards and chipboard ● PREVENTS JACKING APART OF MATERIALS.Partial thread prevents jacking of the materials on installation. ● NO SNAPPING & NO PILOT, ULYTRA STRONG CORE.Ultra-strong, the screws will not break as materials flex or expand under use and there’s no need to pilot. ● SOLID CLAMPING WITHOUT REAMING.Unique threadform clamps boards fast without reaming and ensures they will not pull apart under load. ● FAST, EASY INSERTION WITH REDUCED TORQUE.Additional wax coating reduces torque for faster insertion with a quick pick up. ● ELIMINATES BLISTERING & DAMAGE TO MATERIAL.Specialist thread core eliminates blistering and damage to the material on insertion.

Read more less