TIMCO

A single thread woodscrew mainly used in various types of timber and man-made boards or into masonry with the use of a plastic plug. • Double countersunk reduces the likelihood of head shear and assists completion of countersinking• Wax lubricated to enhance screw insertion time, extra driving torque and resistance to corrosion• 40° deep single thread to provide a secure fixing with high pull-out resistance• 25° sharp point and single lead for a fast start and improved thread acceptance• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length Brand TIMCO Corrosion Rating (1-5) 1 - Clean, dry & low humidity environments Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 10 Head Ø (mm) 9.74 Head Type Double Countersunk Inner Thread Ø d1 (mm) 3.1 L (inch) 4 L (mm) 100 Lubrication Wax Material Carbon Steel Pack Qty 250 Point Type 25° Sharp Recess Type Pozi Size (imp.) 10 x 4 Size (mm) 5.0 x 100 Substrates Softwood, Chipboard, MDF, Masonry (with plug) Thread Coverage Partially Threaded Thread L (mm) 70 Thread Ø (mm) 5 Thread Type 40° Single Deep

Read more less

The unique patented Velocity screw has been specifically designed to give rapid installation into many different materials, whilst achieving exceptional pull-out resistance. It has been designed to give the user a consistent and reliable product that can be used in a variety of applications. • Dual angle thread designed for superior hold• Partially threaded stops the timber jacking. NOTE: Partially threaded from 40mm• Rapid drive twist cut enhances drive performance• Slash point tip helps prevent the timber splitting when screwing close to the edge, whilst also helping to reduce torque. NOTE: Slash point from 25mm and above Brand TIMCO CE Standard BS EN 14592:2008 Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 10 Head Ø (mm) 9.68 Head Type Double Countersunk with Ribs Inner Thread Ø d1 (mm) 3.12 L (inch) 4 L (mm) 100 Lubrication Wax Material Carbon Steel Ø (mm) 5 Pack Qty 1000 Point Type Single Slash Recess Type Pozi Shank Type Rapid Drive Twist Size (imp.) 10 x 4 Size (mm) 5.0 x 100 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread Coverage Partially Threaded Thread L (mm) 70 Thread Ø (mm) 5 Thread Type Serrated Dual Angle

Read more less

C2 is a revolutionary high-performance screw designed using modern manufacturing methods. Its superior holding strength in a wide variety of materials provides ultimate performance. • Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw• Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage• Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating• Dual angle thread for ultimate performance and exceptionally high pull-out resistance• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length Application Joinery, Carpentry, Timber Construction, Furniture Manufacturing Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 10 Head Ø (mm) 9.7 Head Type Double Countersunk Indoor/Outdoor Usage Indoor, Covered Outdoor L (inch) 4 3⁄4 L (mm) 120 Lubrication Gleitmo Material Hardened Steel Pack Qty 100 Pack Type Box Point Type Sharp Recess Type Pozi Resistant Type Corrosion-Resistant Size 5.0 x 120 Size (imp.) 10 x 4 3⁄4 Size (mm) 5.0 x 120 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread L (mm) 70 Thread Ø (mm) 5 Thread Type 40° Single

Read more less

C2 is a revolutionary high-performance screw designed using modern manufacturing methods. Its superior holding strength in a wide variety of materials provides ultimate performance. • Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw• Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage• Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating• Dual angle thread for ultimate performance and exceptionally high pull-out resistance• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length Application Joinery, Carpentry, Timber Construction, Furniture Manufacturing Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 10 Head Ø (mm) 9.7 Head Type Double Countersunk Indoor/Outdoor Usage Indoor, Covered Outdoor L (inch) 1 1⁄4 L (mm) 30 Lubrication Gleitmo Material Hardened Steel Pack Qty 200 Pack Type Box Point Type Sharp Recess Type Pozi Resistant Type Corrosion-Resistant Size 5.0 x 30 Size (imp.) 10 x 1 1⁄4 Size (mm) 5.0 x 30 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread L (mm) 25 Thread Ø (mm) 5 Thread Type 40° Single

Read more less

Specifically designed as a multi-purpose product, the 25° sharp point, special thread design, lubrication and corrosion resistant plating ensures the screw will consistently perform efficiently in hardwood, chipboard, MDF, plastic and thin sheet metal, whilst offering exceptional holding power. NOTE: Sharp point only. • Pan head for improved clamping• Fully threaded up to 75mm, thereafter partially threaded• 40° deep single thread to provide a secure fixing with high pull-out resistance• Surface hardened to prevent torque shearing under load and core hardened for improved ductility• Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ2 Finish Zinc & Yellow Head Type Pan L (mm) 30 Lubrication Gleitmo Material Carbon Steel Pack Qty 200 Pack Type Box Point Type 25° Sharp Recess Type Pozi Size (mm) 5.0 x 30 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread L (mm) 30 Thread Ø (mm) 5 Thread Type Single Coarse 40°

Read more less

C2 is a revolutionary high-performance screw designed using modern manufacturing methods. Its superior holding strength in a wide variety of materials provides ultimate performance. • Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw• Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage• Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating• Dual angle thread for ultimate performance and exceptionally high pull-out resistance• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length Application Joinery, Carpentry, Timber Construction, Furniture Manufacturing Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 10 Head Ø (mm) 9.7 Head Type Double Countersunk Indoor/Outdoor Usage Indoor, Covered Outdoor L (inch) 1 1⁄2 L (mm) 40 Lubrication Gleitmo Material Hardened Steel Pack Qty 200 Pack Type Box Point Type Sharp Recess Type Pozi Resistant Type Corrosion-Resistant Size 5.0 x 40 Size (imp.) 10 x 1 1⁄2 Size (mm) 5.0 x 40 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread L (mm) 35 Thread Ø (mm) 5 Thread Type 40° Single

Read more less

The unique patented Velocity screw has been specifically designed to give rapid installation into many different materials, whilst achieving exceptional pull-out resistance. It has been designed to give the user a consistent and reliable product that can be used in a variety of applications. • Dual angle thread designed for superior hold• Partially threaded stops the timber jacking. NOTE: Partially threaded from 40mm• Rapid drive twist cut enhances drive performance• Slash point tip helps prevent the timber splitting when screwing close to the edge, whilst also helping to reduce torque. NOTE: Slash point from 25mm and above Brand TIMCO CE Standard BS EN 14592:2008 Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 10 Head Ø (mm) 9.68 Head Type Double Countersunk with Ribs Inner Thread Ø d1 (mm) 3.12 L (inch) 1 1⁄2 L (mm) 40 Lubrication Wax Material Carbon Steel Ø (mm) 5 Pack Qty 1000 Point Type Single Slash Recess Type Pozi Shank Type Rapid Drive Twist Size (imp.) 10 x 1 1⁄2 Size (mm) 5.0 x 40 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread Coverage Partially Threaded Thread L (mm) 30 Thread Ø (mm) 5 Thread Type Serrated Dual Angle

Read more less

C2 is a revolutionary high-performance screw designed using modern manufacturing methods. Its superior holding strength in a wide variety of materials provides ultimate performance. • Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw• Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage• Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating• Dual angle thread for ultimate performance and exceptionally high pull-out resistance• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length Application Joinery, Carpentry, Timber Construction, Furniture Manufacturing Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 10 Head Ø (mm) 9.7 Head Type Double Countersunk Indoor/Outdoor Usage Indoor, Covered Outdoor L (inch) 1 3⁄4 L (mm) 45 Lubrication Gleitmo Material Hardened Steel Pack Qty 200 Pack Type Box Point Type Sharp Recess Type Pozi Resistant Type Corrosion-Resistant Size 5.0 x 45 Size (imp.) 10 x 1 3⁄4 Size (mm) 5.0 x 45 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread L (mm) 40 Thread Ø (mm) 5 Thread Type 40° Single

Read more less

C2 is a revolutionary high-performance screw designed using modern manufacturing methods and an innovative twin-cut point, ensuring consistent and rapid pick-up while reducing timber splitting. Its superior holding strength in a wide variety of materials provides ultimate performance. • Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw• Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage• Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating• Dual angle thread for ultimate performance and exceptionally high pull-out resistance• Patented twin cut technology for rapid "pick-up" and reduces timber splitting• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length Application Joinery, Carpentry, Timber Construction, Furniture Manufacturing Brand TIMCO CE Standard BS EN 14592:2008 Colour Yellow Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 10 Head Ø (mm) 9.7 Head Type Double Countersunk Indoor/Outdoor Usage Indoor, Covered Outdoor Inner Thread Ø d1 (mm) 2.95 L (inch) 2 L (mm) 50 Lubrication Gleitmo Material Hardened Steel Ø (mm) 5 Pack Qty 1000 Point Type Twin-Cut Recess Type Pozi Resistant Type Corrosion-Resistant Size 5.0 x 50 Size (imp.) 10 x 2 Size (mm) 5.0 x 50 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread Coverage Fully Threaded Thread L (mm) 45 Thread Ø (mm) 5 Thread Type 40° Single Deep  

Read more less

C2 is a revolutionary high-performance screw designed using modern manufacturing methods. Its superior holding strength in a wide variety of materials provides ultimate performance. • Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw• Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage• Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating• Dual angle thread for ultimate performance and exceptionally high pull-out resistance• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length Application Joinery, Carpentry, Timber Construction, Furniture Manufacturing Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 10 Head Ø (mm) 9.7 Head Type Double Countersunk Indoor/Outdoor Usage Indoor, Covered Outdoor L (inch) 2 L (mm) 50 Lubrication Gleitmo Material Hardened Steel Pack Qty 200 Pack Type Box Point Type Sharp Recess Type Pozi Resistant Type Corrosion-Resistant Size 5.0 x 50 Size (imp.) 10 x 2 Size (mm) 5.0 x 50 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread L (mm) 45 Thread Ø (mm) 5 Thread Type 40° Single

Read more less

Specifically designed as a multi-purpose product, the 25° sharp point, special thread design, lubrication and corrosion resistant plating ensures the screw will consistently perform efficiently in hardwood, chipboard, MDF, plastic and thin sheet metal, whilst offering exceptional holding power. NOTE: Sharp point only. • Pan head for improved clamping• Fully threaded up to 75mm, thereafter partially threaded• 40° deep single thread to provide a secure fixing with high pull-out resistance• Surface hardened to prevent torque shearing under load and core hardened for improved ductility• Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ2 Finish Zinc & Yellow Head Type Pan L (mm) 50 Lubrication Gleitmo Material Carbon Steel Pack Qty 200 Pack Type Box Point Type 25° Sharp Recess Type Pozi Size (mm) 5.0 x 50 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread L (mm) 50 Thread Ø (mm) 5 Thread Type Single Coarse 40°

Read more less

A single thread woodscrew mainly used in various types of timber and man-made boards or into masonry with the use of a plastic plug. • Double countersunk reduces the likelihood of head shear and assists completion of countersinking• Wax lubricated to enhance screw insertion time, extra driving torque and resistance to corrosion• 40° deep single thread to provide a secure fixing with high pull-out resistance• 25° sharp point and single lead for a fast start and improved thread acceptance• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length Brand TIMCO CE Standard BS EN 14592:2008 Corrosion Rating (1-5) 1 - Clean, dry & low humidity environments Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 10 Head Ø (mm) 9.74 Head Type Double Countersunk Inner Thread Ø d1 (mm) 3.1 L (inch) 2 L (mm) 50 Lubrication Wax Material Carbon Steel Ø (mm) 5 Pack Qty 1000 Point Type 25° Sharp Recess Type Pozi Size (imp.) 10 x 2 Size (mm) 5.0 x 50 Substrates Softwood, Chipboard, MDF, Masonry (with plug) Thread Coverage Fully Threaded Thread L (mm) 45 Thread Ø (mm) 5 Thread Type 40° Single Deep

Read more less

A single thread woodscrew mainly used in various types of timber and man-made boards or into masonry with the use of a plastic plug. • Double countersunk reduces the likelihood of head shear and assists completion of countersinking• Wax lubricated to enhance screw insertion time, extra driving torque and resistance to corrosion• 40° deep single thread to provide a secure fixing with high pull-out resistance• 25° sharp point and single lead for a fast start and improved thread acceptance• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length Brand TIMCO Corrosion Rating (1-5) 1 - Clean, dry & low humidity environments Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 10 Head Ø (mm) 9.74 Head Type Double Countersunk Inner Thread Ø d1 (mm) 3.1 L (inch) 2 L (mm) 50 Lubrication Wax Material Carbon Steel Pack Qty 525 Point Type 25° Sharp Recess Type Pozi Size (imp.) 10 x 2 Size (mm) 5.0 x 50 Substrates Softwood, Chipboard, MDF, Masonry (with plug) Thread Coverage Fully Threaded Thread L (mm) 45 Thread Ø (mm) 5 Thread Type 40° Single Deep

Read more less

The unique patented Velocity screw has been specifically designed to give rapid installation into many different materials, whilst achieving exceptional pull-out resistance. It has been designed to give the user a consistent and reliable product that can be used in a variety of applications. • Dual angle thread designed for superior hold• Partially threaded stops the timber jacking. NOTE: Partially threaded from 40mm• Rapid drive twist cut enhances drive performance• Slash point tip helps prevent the timber splitting when screwing close to the edge, whilst also helping to reduce torque. NOTE: Slash point from 25mm and above Brand TIMCO CE Standard BS EN 14592:2008 Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 10 Head Ø (mm) 9.68 Head Type Double Countersunk with Ribs Inner Thread Ø d1 (mm) 3.12 L (inch) 2 L (mm) 50 Lubrication Wax Material Carbon Steel Ø (mm) 5 Pack Qty 1000 Point Type Single Slash Recess Type Pozi Shank Type Rapid Drive Twist Size (imp.) 10 x 2 Size (mm) 5.0 x 50 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread Coverage Partially Threaded Thread L (mm) 30 Thread Ø (mm) 5 Thread Type Serrated Dual Angle

Read more less

C2 is a revolutionary high-performance screw designed using modern manufacturing methods and an innovative twin-cut point, ensuring consistent and rapid pick-up while reducing timber splitting. Its superior holding strength in a wide variety of materials provides ultimate performance. • Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw• Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage• Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating• Dual angle thread for ultimate performance and exceptionally high pull-out resistance• Patented twin cut technology for rapid "pick-up" and reduces timber splitting• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length Application Joinery, Carpentry, Timber Construction, Furniture Manufacturing Brand TIMCO CE Standard BS EN 14592:2008 Colour Yellow Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 10 Head Ø (mm) 9.7 Head Type Double Countersunk Indoor/Outdoor Usage Indoor, Covered Outdoor Inner Thread Ø d1 (mm) 2.95 L (inch) 2 1⁄2 L (mm) 60 Lubrication Gleitmo Material Hardened Steel Ø (mm) 5 Pack Qty 1000 Point Type Twin-Cut Recess Type Pozi Resistant Type Corrosion-Resistant Size 5.0 x 60 Size (imp.) 10 x 2 1⁄2 Size (mm) 5.0 x 60 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread Coverage Fully Threaded Thread L (mm) 55 Thread Ø (mm) 5 Thread Type 40° Single Deep  

Read more less

C2 is a revolutionary high-performance screw designed using modern manufacturing methods. Its superior holding strength in a wide variety of materials provides ultimate performance. • Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw• Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage• Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating• Dual angle thread for ultimate performance and exceptionally high pull-out resistance• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length Application Joinery, Carpentry, Timber Construction, Furniture Manufacturing Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 10 Head Ø (mm) 9.7 Head Type Double Countersunk Indoor/Outdoor Usage Indoor, Covered Outdoor L (inch) 2 1⁄2 L (mm) 60 Lubrication Gleitmo Material Hardened Steel Pack Qty 200 Pack Type Box Point Type Sharp Recess Type Pozi Resistant Type Corrosion-Resistant Size 5.0 x 60 Size (imp.) 10 x 2 1⁄2 Size (mm) 5.0 x 60 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread L (mm) 55 Thread Ø (mm) 5 Thread Type 40° Single

Read more less

A single thread woodscrew mainly used in various types of timber and man-made boards or into masonry with the use of a plastic plug. • Double countersunk reduces the likelihood of head shear and assists completion of countersinking• Wax lubricated to enhance screw insertion time, extra driving torque and resistance to corrosion• 40° deep single thread to provide a secure fixing with high pull-out resistance• 25° sharp point and single lead for a fast start and improved thread acceptance• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length Brand TIMCO Corrosion Rating (1-5) 1 - Clean, dry & low humidity environments Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 10 Head Ø (mm) 9.74 Head Type Double Countersunk Inner Thread Ø d1 (mm) 3.1 L (inch) 2 1/2 L (mm) 60 Lubrication Wax Material Carbon Steel Pack Qty 400 Point Type 25° Sharp Recess Type Pozi Size (imp.) 10 x 2 1/2 Size (mm) 5.0 x 60 Substrates Softwood, Chipboard, MDF, Masonry (with plug) Thread Coverage Fully Threaded Thread L (mm) 55 Thread Ø (mm) 5 Thread Type 40° Single Deep

Read more less

The unique patented Velocity screw has been specifically designed to give rapid installation into many different materials, whilst achieving exceptional pull-out resistance. It has been designed to give the user a consistent and reliable product that can be used in a variety of applications. • Dual angle thread designed for superior hold• Partially threaded stops the timber jacking. NOTE: Partially threaded from 40mm• Rapid drive twist cut enhances drive performance• Slash point tip helps prevent the timber splitting when screwing close to the edge, whilst also helping to reduce torque. NOTE: Slash point from 25mm and above Brand TIMCO CE Standard BS EN 14592:2008 Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 10 Head Ø (mm) 9.68 Head Type Double Countersunk with Ribs Inner Thread Ø d1 (mm) 3.12 L (inch) 2 1⁄2  L (mm) 60 Lubrication Wax Material Carbon Steel Ø (mm) 5 Pack Qty 1000 Point Type Single Slash Recess Type Pozi Shank Type Rapid Drive Twist Size (imp.) 10 x 2 1⁄2  Size (mm) 5.0 x 60 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread Coverage Partially Threaded Thread L (mm) 40 Thread Ø (mm) 5 Thread Type Serrated Dual Angle

Read more less

C2 is a revolutionary high-performance screw designed using modern manufacturing methods and an innovative twin-cut point, ensuring consistent and rapid pick-up while reducing timber splitting. Its superior holding strength in a wide variety of materials provides ultimate performance. • Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw• Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage• Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating• Dual angle thread for ultimate performance and exceptionally high pull-out resistance• Patented twin cut technology for rapid "pick-up" and reduces timber splitting• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length Application Joinery, Carpentry, Timber Construction, Furniture Manufacturing Brand TIMCO CE Standard BS EN 14592:2008 Colour Yellow Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 10 Head Ø (mm) 9.7 Head Type Double Countersunk Indoor/Outdoor Usage Indoor, Covered Outdoor Inner Thread Ø d1 (mm) 2.95 L (inch) 2 3⁄4 L (mm) 70 Lubrication Gleitmo Material Hardened Steel Ø (mm) 5 Pack Qty 1000 Point Type Twin-Cut Recess Type Pozi Resistant Type Corrosion-Resistant Size 5.0 x 70 Size (imp.) 10 x 2 3⁄4 Size (mm) 5.0 x 70 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread Coverage Fully Threaded Thread L (mm) 65 Thread Ø (mm) 5 Thread Type 40° Single Deep  

Read more less

C2 is a revolutionary high-performance screw designed using modern manufacturing methods. Its superior holding strength in a wide variety of materials provides ultimate performance. • Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw• Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage• Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating• Dual angle thread for ultimate performance and exceptionally high pull-out resistance• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length Application Joinery, Carpentry, Timber Construction, Furniture Manufacturing Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 10 Head Ø (mm) 9.7 Head Type Double Countersunk Indoor/Outdoor Usage Indoor, Covered Outdoor L (inch) 2 3⁄4 L (mm) 70 Lubrication Gleitmo Material Hardened Steel Pack Qty 200 Pack Type Box Point Type Sharp Recess Type Pozi Resistant Type Corrosion-Resistant Size 5.0 x 70 Size (imp.) 10 x 2 3⁄4 Size (mm) 5.0 x 70 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread L (mm) 65 Thread Ø (mm) 5 Thread Type 40° Single

Read more less

A single thread woodscrew mainly used in various types of timber and man-made boards or into masonry with the use of a plastic plug. • Double countersunk reduces the likelihood of head shear and assists completion of countersinking• Wax lubricated to enhance screw insertion time, extra driving torque and resistance to corrosion• 40° deep single thread to provide a secure fixing with high pull-out resistance• 25° sharp point and single lead for a fast start and improved thread acceptance• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length Brand TIMCO Corrosion Rating (1-5) 1 - Clean, dry & low humidity environments Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 10 Head Ø (mm) 9.74 Head Type Double Countersunk Inner Thread Ø d1 (mm) 3.1 L (inch) 2 3/4 L (mm) 70 Lubrication Wax Material Carbon Steel Pack Qty 375 Point Type 25° Sharp Recess Type Pozi Size (imp.) 10 x 2 3/4 Size (mm) 5.0 x 70 Substrates Softwood, Chipboard, MDF, Masonry (with plug) Thread Coverage Fully Threaded Thread L (mm) 65 Thread Ø (mm) 5 Thread Type 40° Single Deep

Read more less

The unique patented Velocity screw has been specifically designed to give rapid installation into many different materials, whilst achieving exceptional pull-out resistance. It has been designed to give the user a consistent and reliable product that can be used in a variety of applications. • Dual angle thread designed for superior hold• Partially threaded stops the timber jacking. NOTE: Partially threaded from 40mm• Rapid drive twist cut enhances drive performance• Slash point tip helps prevent the timber splitting when screwing close to the edge, whilst also helping to reduce torque. NOTE: Slash point from 25mm and above Brand TIMCO CE Standard BS EN 14592:2008 Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 10 Head Ø (mm) 9.68 Head Type Double Countersunk with Ribs Inner Thread Ø d1 (mm) 3.12 L (inch) 2 3⁄4 L (mm) 70 Lubrication Wax Material Carbon Steel Ø (mm) 5 Pack Qty 1000 Point Type Single Slash Recess Type Pozi Shank Type Rapid Drive Twist Size (imp.) 10 x 2 3⁄4  Size (mm) 5.0 x 70 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread Coverage Partially Threaded Thread L (mm) 40 Thread Ø (mm) 5 Thread Type Serrated Dual Angle

Read more less

C2 is a revolutionary high-performance screw designed using modern manufacturing methods. Its superior holding strength in a wide variety of materials provides ultimate performance. • Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw• Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage• Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating• Dual angle thread for ultimate performance and exceptionally high pull-out resistance• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length Application Joinery, Carpentry, Timber Construction, Furniture Manufacturing Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 10 Head Ø (mm) 9.7 Head Type Double Countersunk Indoor/Outdoor Usage Indoor, Covered Outdoor L (inch) 2 7⁄8 L (mm) 75 Lubrication Gleitmo Material Hardened Steel Pack Qty 200 Pack Type Box Point Type Sharp Recess Type Pozi Resistant Type Corrosion-Resistant Size 5.0 x 75 Size (imp.) 10 x 2 7⁄8 Size (mm) 5.0 x 75 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread L (mm) 70 Thread Ø (mm) 5 Thread Type 40° Single

Read more less

C2 is a revolutionary high-performance screw designed using modern manufacturing methods and an innovative twin-cut point, ensuring consistent and rapid pick-up while reducing timber splitting. Its superior holding strength in a wide variety of materials provides ultimate performance. • Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw• Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage• Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating• Dual angle thread for ultimate performance and exceptionally high pull-out resistance• Patented twin cut technology for rapid "pick-up" and reduces timber splitting• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length Application Joinery, Carpentry, Timber Construction, Furniture Manufacturing Brand TIMCO CE Standard BS EN 14592:2008 Colour Yellow Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 10 Head Ø (mm) 9.7 Head Type Double Countersunk Indoor/Outdoor Usage Indoor, Covered Outdoor Inner Thread Ø d1 (mm) 2.95 L (inch) 3 L (mm) 80 Lubrication Gleitmo Material Hardened Steel Ø (mm) 5 Pack Qty 1000 Point Type Twin-Cut Recess Type Pozi Resistant Type Corrosion-Resistant Size 5.0 x 80 Size (imp.) 10 x 3 Size (mm) 5.0 x 80 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread Coverage Fully Threaded Thread L (mm) 70 Thread Ø (mm) 5 Thread Type 40° Single Deep  

Read more less

C2 is a revolutionary high-performance screw designed using modern manufacturing methods. Its superior holding strength in a wide variety of materials provides ultimate performance. • Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw• Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage• Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating• Dual angle thread for ultimate performance and exceptionally high pull-out resistance• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length Application Joinery, Carpentry, Timber Construction, Furniture Manufacturing Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 10 Head Ø (mm) 9.7 Head Type Double Countersunk Indoor/Outdoor Usage Indoor, Covered Outdoor L (inch) 3 L (mm) 80 Lubrication Gleitmo Material Hardened Steel Pack Qty 200 Pack Type Box Point Type Sharp Recess Type Pozi Resistant Type Corrosion-Resistant Size 5.0 x 80 Size (imp.) 10 x 3 Size (mm) 5.0 x 80 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread L (mm) 70 Thread Ø (mm) 5 Thread Type 40° Single

Read more less

A single thread woodscrew mainly used in various types of timber and man-made boards or into masonry with the use of a plastic plug. • Double countersunk reduces the likelihood of head shear and assists completion of countersinking• Wax lubricated to enhance screw insertion time, extra driving torque and resistance to corrosion• 40° deep single thread to provide a secure fixing with high pull-out resistance• 25° sharp point and single lead for a fast start and improved thread acceptance• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length Brand TIMCO CE Standard BS EN 14592:2008 Corrosion Rating (1-5) 1 - Clean, dry & low humidity environments Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 10 Head Ø (mm) 9.74 Head Type Double Countersunk Inner Thread Ø d1 (mm) 3.1 L (inch) 3 L (mm) 80 Lubrication Wax Material Carbon Steel Ø (mm) 5 Pack Qty 1000 Point Type 25° Sharp Recess Type Pozi Size (imp.) 10 x 3 Size (mm) 5.0 x 80 Substrates Softwood, Chipboard, MDF, Masonry (with plug) Thread Coverage Fully Threaded Thread L (mm) 70 Thread Ø (mm) 5 Thread Type 40° Single Deep

Read more less

A single thread woodscrew mainly used in various types of timber and man-made boards or into masonry with the use of a plastic plug. • Double countersunk reduces the likelihood of head shear and assists completion of countersinking• Wax lubricated to enhance screw insertion time, extra driving torque and resistance to corrosion• 40° deep single thread to provide a secure fixing with high pull-out resistance• 25° sharp point and single lead for a fast start and improved thread acceptance• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length Brand TIMCO Corrosion Rating (1-5) 1 - Clean, dry & low humidity environments Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 10 Head Ø (mm) 9.74 Head Type Double Countersunk Inner Thread Ø d1 (mm) 3.1 L (inch) 2 3/4 L (mm) 70 Lubrication Wax Material Carbon Steel Pack Qty 325 Point Type 25° Sharp Recess Type Pozi Size (imp.) 10 x 3 Size (mm) 5.0 x 80 Substrates Softwood, Chipboard, MDF, Masonry (with plug) Thread Coverage Fully Threaded Thread L (mm) 70 Thread Ø (mm) 5 Thread Type 40° Single Deep

Read more less

The unique patented Velocity screw has been specifically designed to give rapid installation into many different materials, whilst achieving exceptional pull-out resistance. It has been designed to give the user a consistent and reliable product that can be used in a variety of applications. • Dual angle thread designed for superior hold• Partially threaded stops the timber jacking. NOTE: Partially threaded from 40mm• Rapid drive twist cut enhances drive performance• Slash point tip helps prevent the timber splitting when screwing close to the edge, whilst also helping to reduce torque. NOTE: Slash point from 25mm and above Brand TIMCO CE Standard BS EN 14592:2008 Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 10 Head Ø (mm) 9.68 Head Type Double Countersunk with Ribs Inner Thread Ø d1 (mm) 3.12 L (inch) 3 L (mm) 80 Lubrication Wax Material Carbon Steel Ø (mm) 5 Pack Qty 1000 Point Type Single Slash Recess Type Pozi Shank Type Rapid Drive Twist Size (imp.) 10 x 3  Size (mm) 5.0 x 80 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread Coverage Partially Threaded Thread L (mm) 50 Thread Ø (mm) 5 Thread Type Serrated Dual Angle

Read more less

C2 is a revolutionary high-performance screw designed using modern manufacturing methods. Its superior holding strength in a wide variety of materials provides ultimate performance. • Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw• Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage• Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating• Dual angle thread for ultimate performance and exceptionally high pull-out resistance• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length Application Joinery, Carpentry, Timber Construction, Furniture Manufacturing Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 10 Head Ø (mm) 9.7 Head Type Double Countersunk Indoor/Outdoor Usage Indoor, Covered Outdoor L (inch) 3 1⁄2 L (mm) 90 Lubrication Gleitmo Material Hardened Steel Pack Qty 100 Pack Type Box Point Type Sharp Recess Type Pozi Resistant Type Corrosion-Resistant Size 5.0 x 90 Size (imp.) 10 x 3 1⁄2 Size (mm) 5.0 x 90 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread L (mm) 70 Thread Ø (mm) 5 Thread Type 40° Single

Read more less

The unique patented Velocity screw has been specifically designed to give rapid installation into many different materials, whilst achieving exceptional pull-out resistance. It has been designed to give the user a consistent and reliable product that can be used in a variety of applications. • Dual angle thread designed for superior hold• Partially threaded stops the timber jacking. NOTE: Partially threaded from 40mm• Rapid drive twist cut enhances drive performance• Slash point tip helps prevent the timber splitting when screwing close to the edge, whilst also helping to reduce torque. NOTE: Slash point from 25mm and above Brand TIMCO CE Standard BS EN 14592:2008 Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 10 Head Ø (mm) 9.68 Head Type Double Countersunk with Ribs Inner Thread Ø d1 (mm) 3.12 L (inch) 3 1⁄2 L (mm) 90 Lubrication Wax Material Carbon Steel Ø (mm) 5 Pack Qty 1000 Point Type Single Slash Recess Type Pozi Shank Type Rapid Drive Twist Size (imp.) 10 x 3 1⁄2  Size (mm) 5.0 x 90 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread Coverage Partially Threaded Thread L (mm) 60 Thread Ø (mm) 5 Thread Type Serrated Dual Angle

Read more less

A medium duty metal to metal screw with a large flat surface under the head, making it ideal for fixing thinner sheet material when a flush finish is required. Silver organic plated to withstand over 500 hours salt spray test. • Metsec Tested• Large head diameter for increased clamping• Coarse 60° self-tapping thread for extreme grip & excellent pull-out• Phillips No.2 recess for a positive drive• Fire Classification - A1 CE Standard BS EN 14566:2008, BS EN 10666:2008 Corrosion Rating (1-5) 3 - Urban & industrial areas with a low salt atmosphere Driver Bit Size PH2 Finish Exterior (Silver Organic) Head Type Low Profile Pancake Material Carbon Steel MDT (mm) 5 Pack Qty 500 Point Type Self-Drilling Recess Type Phillips Size (mm) 5.5 x 19 Substrates Steel Thread Type 60° Self-Tapping

Read more less

A medium duty metal to metal screw with a large flat surface under the head, making it ideal for fixing thinner sheet material when a flush finish is required. Silver organic plated to withstand over 500 hours salt spray test. • Metsec Tested• Large head diameter for increased clamping• Coarse 60° self-tapping thread for extreme grip & excellent pull-out• Phillips No.2 recess for a positive drive• Fire Classification - A1 CE Standard BS EN 14566:2008, BS EN 10666:2008 Corrosion Rating (1-5) 3 - Urban & industrial areas with a low salt atmosphere Driver Bit Size PH2 Finish Exterior (Silver Organic) Head Type Low Profile Pancake Material Carbon Steel MDT (mm) 5 Pack Qty 500 Point Type Self-Drilling Recess Type Phillips Size (mm) 5.5 x 26 Substrates Steel Thread Type 60° Self-Tapping

Read more less

A medium quality cloth tape used to repair, fasten, bundle, strengthen, mark, plus much more. • Adheres to multiple surfaces• Weather resistant• Tough & strong• Easy tear Brand TIMCO Colour Black Finish Gloss L (m) 50 Material Cloth W (mm) 48

Read more less

A medium quality cloth tape used to repair, fasten, bundle, strengthen, mark, plus much more. • Adheres to multiple surfaces• Weather resistant• Tough & strong• Easy tear Brand TIMCO Colour Silver Finish Gloss L (m) 50 Material Cloth W (mm) 48

Read more less

A medium quality cloth tape used to repair, fasten, bundle, strengthen, mark, plus much more. • Adheres to multiple surfaces• Weather resistant• Tough & strong• Easy tear Brand TIMCO Colour White Finish Gloss L (m) 50 Material Cloth W (mm) 48

Read more less

C2 is a revolutionary high-performance screw designed using modern manufacturing methods. Its superior holding strength in a wide variety of materials provides ultimate performance. • Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw• Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage• Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating• Dual angle thread for ultimate performance and exceptionally high pull-out resistance• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length Application Joinery, Carpentry, Timber Construction, Furniture Manufacturing Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ3 Finish Zinc & Yellow Gauge 12 Head Ø (mm) 11.65 Head Type Double Countersunk Indoor/Outdoor Usage Indoor, Covered Outdoor L (inch) 4 L (mm) 100 Lubrication Gleitmo Material Hardened Steel Pack Qty 100 Pack Type Box Point Type Sharp Recess Type Pozi Resistant Type Corrosion-Resistant Size 6.0 x 100 Size (imp.) 12 x 4 Size (mm) 6.0 x 100 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread L (mm) 70 Thread Ø (mm) 6 Thread Type 40° Single

Read more less

C2 is a revolutionary high-performance screw designed using modern manufacturing methods. Its superior holding strength in a wide variety of materials provides ultimate performance. • Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw• Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage• Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating• Dual angle thread for ultimate performance and exceptionally high pull-out resistance• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length Application Joinery, Carpentry, Timber Construction, Furniture Manufacturing Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ3 Finish Zinc & Yellow Gauge 12 Head Ø (mm) 11.65 Head Type Double Countersunk Indoor/Outdoor Usage Indoor, Covered Outdoor L (inch) 5 1⁄8 L (mm) 130 Lubrication Gleitmo Material Hardened Steel Pack Qty 100 Pack Type Box Point Type Sharp Recess Type Pozi Resistant Type Corrosion-Resistant Size 6.0 x 130 Size (imp.) 12 x 5 1⁄8 Size (mm) 6.0 x 130 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread L (mm) 70 Thread Ø (mm) 6 Thread Type 40° Single

Read more less

C2 is a revolutionary high-performance screw designed using modern manufacturing methods. Its superior holding strength in a wide variety of materials provides ultimate performance. • Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw• Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage• Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating• Dual angle thread for ultimate performance and exceptionally high pull-out resistance• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length Application Joinery, Carpentry, Timber Construction, Furniture Manufacturing Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ3 Finish Zinc & Yellow Gauge 12 Head Ø (mm) 11.65 Head Type Double Countersunk Indoor/Outdoor Usage Indoor, Covered Outdoor L (inch) 6 L (mm) 150 Lubrication Gleitmo Material Hardened Steel Pack Qty 100 Pack Type Box Point Type Sharp Recess Type Pozi Resistant Type Corrosion-Resistant Size 6.0 x 150 Size (imp.) 12 x 6 Size (mm) 6.0 x 150 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread L (mm) 70 Thread Ø (mm) 6 Thread Type 40° Single

Read more less

C2 is a revolutionary high-performance screw designed using modern manufacturing methods. Its superior holding strength in a wide variety of materials provides ultimate performance. • Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw• Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage• Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating• Dual angle thread for ultimate performance and exceptionally high pull-out resistance• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length Application Joinery, Carpentry, Timber Construction, Furniture Manufacturing Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ3 Finish Zinc & Yellow Gauge 12 Head Ø (mm) 11.65 Head Type Double Countersunk Indoor/Outdoor Usage Indoor, Covered Outdoor L (inch) 7 1⁄4 L (mm) 180 Lubrication Gleitmo Material Hardened Steel Pack Qty 100 Pack Type Box Point Type Sharp Recess Type Pozi Resistant Type Corrosion-Resistant Size 6.0 x 180 Size (imp.) 12 x 7 1⁄4 Size (mm) 6.0 x 180 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread L (mm) 70 Thread Ø (mm) 6 Thread Type 40° Single

Read more less

C2 is a revolutionary high-performance screw designed using modern manufacturing methods. Its superior holding strength in a wide variety of materials provides ultimate performance. • Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw• Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage• Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating• Dual angle thread for ultimate performance and exceptionally high pull-out resistance• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length Application Joinery, Carpentry, Timber Construction, Furniture Manufacturing Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ3 Finish Zinc & Yellow Gauge 12 Head Ø (mm) 11.65 Head Type Double Countersunk Indoor/Outdoor Usage Indoor, Covered Outdoor L (inch) 8 L (mm) 200 Lubrication Gleitmo Material Hardened Steel Pack Qty 100 Pack Type Box Point Type Sharp Recess Type Pozi Resistant Type Corrosion-Resistant Size 6.0 x 200 Size (imp.) 12 x 8 Size (mm) 6.0 x 200 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread L (mm) 70 Thread Ø (mm) 6 Thread Type 40° Single

Read more less

C2 is a revolutionary high-performance screw designed using modern manufacturing methods. Its superior holding strength in a wide variety of materials provides ultimate performance. • Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw• Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage• Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating• Dual angle thread for ultimate performance and exceptionally high pull-out resistance• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length Application Joinery, Carpentry, Timber Construction, Furniture Manufacturing Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ3 Finish Zinc & Yellow Gauge 12 Head Ø (mm) 11.65 Head Type Double Countersunk Indoor/Outdoor Usage Indoor, Covered Outdoor L (inch) 2 L (mm) 50 Lubrication Gleitmo Material Hardened Steel Pack Qty 200 Pack Type Box Point Type Sharp Recess Type Pozi Resistant Type Corrosion-Resistant Size 6.0 x 50 Size (imp.) 12 x 2 Size (mm) 6.0 x 50 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread L (mm) 45 Thread Ø (mm) 6 Thread Type 40° Single

Read more less

C2 is a revolutionary high-performance screw designed using modern manufacturing methods. Its superior holding strength in a wide variety of materials provides ultimate performance. • Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw• Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage• Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating• Dual angle thread for ultimate performance and exceptionally high pull-out resistance• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length Application Joinery, Carpentry, Timber Construction, Furniture Manufacturing Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ3 Finish Zinc & Yellow Gauge 12 Head Ø (mm) 11.65 Head Type Double Countersunk Indoor/Outdoor Usage Indoor, Covered Outdoor L (inch) 2 1⁄2 L (mm) 60 Lubrication Gleitmo Material Hardened Steel Pack Qty 200 Pack Type Box Point Type Sharp Recess Type Pozi Resistant Type Corrosion-Resistant Size 6.0 x 60 Size (imp.) 12 x 2 1⁄2 Size (mm) 6.0 x 60 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread L (mm) 55 Thread Ø (mm) 6 Thread Type 40° Single

Read more less

C2 is a revolutionary high-performance screw designed using modern manufacturing methods. Its superior holding strength in a wide variety of materials provides ultimate performance. • Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw• Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage• Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating• Dual angle thread for ultimate performance and exceptionally high pull-out resistance• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length Application Joinery, Carpentry, Timber Construction, Furniture Manufacturing Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ3 Finish Zinc & Yellow Gauge 12 Head Ø (mm) 11.65 Head Type Double Countersunk Indoor/Outdoor Usage Indoor, Covered Outdoor L (inch) 2 3⁄4 L (mm) 70 Lubrication Gleitmo Material Hardened Steel Pack Qty 200 Pack Type Box Point Type Sharp Recess Type Pozi Resistant Type Corrosion-Resistant Size 6.0 x 70 Size (imp.) 12 x 2 3⁄4 Size (mm) 6.0 x 70 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread L (mm) 65 Thread Ø (mm) 6 Thread Type 40° Single

Read more less

C2 is a revolutionary high-performance screw designed using modern manufacturing methods. Its superior holding strength in a wide variety of materials provides ultimate performance. • Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw• Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage• Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating• Dual angle thread for ultimate performance and exceptionally high pull-out resistance• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length Application Joinery, Carpentry, Timber Construction, Furniture Manufacturing Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ3 Finish Zinc & Yellow Gauge 12 Head Ø (mm) 11.65 Head Type Double Countersunk Indoor/Outdoor Usage Indoor, Covered Outdoor L (inch) 3 L (mm) 80 Lubrication Gleitmo Material Hardened Steel Pack Qty 200 Pack Type Box Point Type Sharp Recess Type Pozi Resistant Type Corrosion-Resistant Size 6.0 x 80 Size (imp.) 12 x 3 Size (mm) 6.0 x 80 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread L (mm) 70 Thread Ø (mm) 6 Thread Type 40° Single

Read more less

C2 is a revolutionary high-performance screw designed using modern manufacturing methods. Its superior holding strength in a wide variety of materials provides ultimate performance. • Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw• Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage• Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating• Dual angle thread for ultimate performance and exceptionally high pull-out resistance• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length Application Joinery, Carpentry, Timber Construction, Furniture Manufacturing Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ3 Finish Zinc & Yellow Gauge 12 Head Ø (mm) 11.65 Head Type Double Countersunk Indoor/Outdoor Usage Indoor, Covered Outdoor L (inch) 3 1⁄2 L (mm) 90 Lubrication Gleitmo Material Hardened Steel Pack Qty 100 Pack Type Box Point Type Sharp Recess Type Pozi Resistant Type Corrosion-Resistant Size 6.0 x 90 Size (imp.) 12 x 3 1⁄2 Size (mm) 6.0 x 90 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread L (mm) 70 Thread Ø (mm) 6 Thread Type 40° Single

Read more less

A set of premium precision screwdrivers, manufactured with hardened and tempered S2 tool steel blades for extra strength and durability. Featuring soft grip handles for user comfort with a rotating end for ease of use and magnetised tips for gripping small screws making them ideal for removing and installing electrical components and similar intricate applications. • Hard wearing ground tips for optimal fastener driving• Magnetised tips & rotating handle ends• Ergonomic handle for controlled & comfortable grip• Rotating handle ends• 25% longer lasting than Cr-V, when comparing torsional strength to Chrome Vanadium with hardness of 55HRC Contents Slotted: 1.5 x 50mm (Qty 1), 2.0 x 50mm (Qty 1), 2.5 x 50mm (Qty 1), 3.0 x 50mm (Qty 1) Phillips: PH00 x 50mm (Qty 1), PH0 x 50mm (Qty 1) Driver Bit Size Assorted Driver Bit Type Assorted L (inch) Assorted L (mm) Assorted Material S2 Hardened Carbon Steel Pack Qty 6 Size Assorted Size (inch) Assorted Size (mm) Assorted Type Precision

Read more less

A set of premium screwdrivers, manufactured with hardened and tempered S2 tool steel blades for extra strength and long tool life. Featuring precision ground tips to prevent camming out and rounding off, with magnetised tips for gripping screws and an ergonomic handle for slip resistance, user comfort and increased driving torque. • Hard wearing ground tips for optimal fastener driving• Ergonomic handle for controlled & comfortable grip• Magnetic tips to assist with installation• High fastener driving torque• 25% longer lasting than Cr-V, when comparing torsional strength to Chrome Vanadium with hardness of 55HRC Contents Slotted: 3 x 75mm (Qty 1), 5 x 100mm (Qty 1), 6.5 x 125mm (Qty 1) Phillips: PH0 x 75mm (Qty 1), PH1 x 100mm (Qty 1), PH2 x 125mm (Qty 1) Driver Bit Size Assorted Driver Bit Type Assorted L (inch) Assorted L (mm) Assorted Material S2 Hardened Carbon Steel Pack Qty 6 Size (inch) Assorted Size (mm) Assorted

Read more less

A set of premium stubby screwdrivers, manufactured with hardened and tempered S2 tool steel blades for extra strength and durability with reduced blades and handles making them ideal for working in tight areas. Featuring precision ground tips for exceptional fastener driving and a magnetised surface for gripping screws. Featuring an anti-slip soft-grip handle for user comfort, higher driving torque and reduced hand fatigue. • Hard wearing ground tips for optimal fastener driving• Ergonomic handle for controlled & comfortable grip• Magnetic tips to assist with installation• High fastener driving torque• 25% longer lasting than Cr-V, when comparing torsional strength to Chrome Vanadium with hardness of 55HRC Contents Slotted: 4 x 38mm (Qty 1), 5.5 x 38mm (Qty 1) Phillips: PH1 x 38mm (Qty 1), PH2 x 38mm (Qty 1) Pozi: PZ1 x 38mm (Qty 1), PZ2 x 38mm (Qty 1) Driver Bit Size Assorted Driver Bit Type Assorted L (inch) Assorted L (mm) Assorted Material S2 Hardened Carbon Steel Pack Qty 6 Size (inch) Assorted Size (mm) Assorted

Read more less