TIMCO

A 48mm heavy duty sealant and caulking gun. • Swivel action barrel for easy application into tight corners• A convenient hook end for hanging• Patented non-drip mechanism• 12:1 trigger ratio• 820g approximate gun weight Brand TIMCO Max. Cartridge Ø (mm) 48 Max. Chamber L (inch) 10 1⁄2  Max. Chamber L mm 265 To Fit Cartridge Size (ml) 310

Read more less

A 48mm gun for dispensing sealants, caulk and adhesives. • 2.3mm strengthened side plates and a 6mm gripper plate• Riveted front cap for reinforcement and integrated cleaning pin• Convenient hook end for hanging• 7:1 trigger ratio• 534g approximate gun weight• Suitable for cartridges up to 380ml Brand TIMCO Max. Cartridge Ø (mm) 48 Max. Chamber L (inch) 10 1⁄2  Max. Chamber L mm 265 To Fit Cartridge Size (ml) 380

Read more less

Thread sealing tape used for a variety of plumbing applications including those involving potable water. Approval WRAS Approved Brand TIMCO Colour White L (m) 12 Thickness (mm) 0.075 W (mm) 12

Read more less

A precision screwdriver with interchangeable driver bits, manufactured from hardened and tempered chrome vanadium for extra strength and durability. Ideal for removing and installing electrical components and similar intricate applications. • Ergonomic anti-slip grip handle• Hardened driver bits for strength & durability• Rotating handle ends Contents Slotted: 2mm (Qty 1), 2.5mm (Qty 1), 3mm (Qty 1) Phillips: PH000 (Qty 1), PH00 (Qty 1), PH0 (Qty 1), PH1 (Qty 1) TX Drive: TX4 (Qty 1), TX5 (Qty 1), TX6 (Qty 1), TX7 (Qty 1) Hex: H0.7 (Qty 1), H0.9 (Qty 1), H1.3 (Qty 1), H1.5 (Qty 1), H2 (Qty 1) Driver Bit Size Assorted Driver Bit Type Assorted L (inch) Assorted L (mm) Assorted Material Cr-V Pack Qty 18 Size Assorted Size (inch) Assorted Size (mm) Assorted Type Precision

Read more less

A strong double sided cloth tape designed to stick two surfaces together where an invisible joint is required. Ideal for fixing carpets, signs and protective sheeting to multiple surfaces. (Backing tape is yellow). • Tough & strong• Backing paper for easy application• Adheres to multiple surfaces Brand TIMCO Colour White Finish Gloss L (m) 25 Material Cloth W (mm) 50

Read more less

A versatile lubricant that helps reduce friction, prevent rust, and ensure smooth operation. Ideal for precision tasks, it provides long-lasting protection and performance. • Fill Level Indicator Strip• Precise Application• Lubricates• Protects 

Read more less

C2 is a revolutionary high-performance screw designed using modern manufacturing methods. Its superior holding strength in a wide variety of materials provides ultimate performance. • Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw• Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage• Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating• Dual angle thread for ultimate performance and exceptionally high pull-out resistance• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length Application Joinery, Carpentry, Timber Construction, Furniture Manufacturing Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 6 Head Ø (mm) 6.6 Head Type Double Countersunk Indoor/Outdoor Usage Indoor, Covered Outdoor L (inch) 1⁄2  L (mm) 12 Lubrication Gleitmo Material Hardened Steel Pack Qty 200 Pack Type Box Point Type Sharp Recess Type Pozi Resistant Type Corrosion-Resistant Size 3.5 x 12 Size (imp.) 6 x 1⁄2  Size (mm) 3.5 x 12 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread L (mm) 7 Thread Ø (mm) 3.5 Thread Type 40° Single

Read more less

C2 is a revolutionary high-performance screw designed using modern manufacturing methods. Its superior holding strength in a wide variety of materials provides ultimate performance. • Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw• Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage• Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating• Dual angle thread for ultimate performance and exceptionally high pull-out resistance• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length Application Joinery, Carpentry, Timber Construction, Furniture Manufacturing Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 6 Head Ø (mm) 6.6 Head Type Double Countersunk Indoor/Outdoor Usage Indoor, Covered Outdoor L (inch) 5⁄8  L (mm) 16 Lubrication Gleitmo Material Hardened Steel Pack Qty 200 Pack Type Box Point Type Sharp Recess Type Pozi Resistant Type Corrosion-Resistant Size 3.5 x 16 Size (imp.) 6 x 5⁄8 Size (mm) 3.5 x 16 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread L (mm) 11 Thread Ø (mm) 3.5 Thread Type 40° Single

Read more less

A light duty metal to metal screw with a phillips recess used for interior applications. • Fire Classification - A1 CE Standard BS EN 14566:2008, BS EN 10666:2008 Corrosion Rating (1-5) 1 - Clean, dry & low humidity environments Driver Bit Size PH2 Finish Zinc Head Type Pan Material Carbon Steel MDT (mm) 2.5 Pack Qty 1000 Pack Type Box Point Type Self-Drilling Recess Type Phillips Size (mm) 3.5 x 16 Substrates Steel Thread Type Self-Tapping

Read more less

C2 is a revolutionary high-performance screw designed using modern manufacturing methods. Its superior holding strength in a wide variety of materials provides ultimate performance. • Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw• Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage• Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating• Dual angle thread for ultimate performance and exceptionally high pull-out resistance• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length Application Joinery, Carpentry, Timber Construction, Furniture Manufacturing Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 6 Head Ø (mm) 6.6 Head Type Double Countersunk Indoor/Outdoor Usage Indoor, Covered Outdoor L (inch) 3⁄4 L (mm) 20 Lubrication Gleitmo Material Hardened Steel Pack Qty 200 Pack Type Box Point Type Sharp Recess Type Pozi Resistant Type Corrosion-Resistant Size 3.5 x 20 Size (imp.) 6 x 3⁄4 Size (mm) 3.5 x 20 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread L (mm) 15 Thread Ø (mm) 3.5 Thread Type 40° Single

Read more less

C2 is a revolutionary high-performance screw designed using modern manufacturing methods. Its superior holding strength in a wide variety of materials provides ultimate performance. • Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw• Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage• Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating• Dual angle thread for ultimate performance and exceptionally high pull-out resistance• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length Application Joinery, Carpentry, Timber Construction, Furniture Manufacturing Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 6 Head Ø (mm) 6.6 Head Type Double Countersunk Indoor/Outdoor Usage Indoor, Covered Outdoor L (inch) 1 L (mm) 20 Lubrication Gleitmo Material Hardened Steel Pack Qty 200 Pack Type Box Point Type Sharp Recess Type Pozi Resistant Type Corrosion-Resistant Size 3.5 x 25 Size (imp.) 6 x 1 Size (mm) 3.5 x 25 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread L (mm) 20 Thread Ø (mm) 3.5 Thread Type 40° Single

Read more less

Used to secure plasterboard to timber stud work. • Phillips No.2 recess for a positive drive• Bugle head to reduce likelihood of damaging the board surface• 25° super sharp point for ease of penetration• Coarse thread for extreme hold• Fire Classification - A1 Brand TIMCO CE Standard BS EN 14566:2008 Colour Dark Grey Corrosion Rating (1-5) 1 - Clean, dry & low humidity environments Driver Bit Size PH2 Finish Dark Grey Phosphate Head Type Bugle L (mm) 25 Material Carbon Steel Pack Qty 1000 Point Type 25° Sharp Recess Type Phillips Size (mm) 3.5 x 25 Thread Coverage Fully Threaded Thread L (mm) 20 Thread Ø (mm) 3.5 Thread Type Coarse

Read more less

A light duty metal to metal screw with a phillips recess used for interior applications. • Fire Classification - A1 CE Standard BS EN 14566:2008, BS EN 10666:2008 Corrosion Rating (1-5) 1 - Clean, dry & low humidity environments Driver Bit Size PH2 Finish Zinc Head Type Pan Material Carbon Steel MDT (mm) 2.5 Pack Qty 1000 Pack Type Box Point Type Self-Drilling Recess Type Phillips Size (mm) 3.5 x 25 Substrates Steel Thread Type Self-Tapping

Read more less

C2 is a revolutionary high-performance screw designed using modern manufacturing methods. Its superior holding strength in a wide variety of materials provides ultimate performance. • Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw• Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage• Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating• Dual angle thread for ultimate performance and exceptionally high pull-out resistance• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length Application Joinery, Carpentry, Timber Construction, Furniture Manufacturing Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 6 Head Ø (mm) 6.6 Head Type Double Countersunk Indoor/Outdoor Usage Indoor, Covered Outdoor L (inch) 1 1⁄4 L (mm) 30 Lubrication Gleitmo Material Hardened Steel Pack Qty 200 Pack Type Box Point Type Sharp Recess Type Pozi Resistant Type Corrosion-Resistant Size 3.5 x 30 Size (imp.) 6 x 1 1⁄4 Size (mm) 3.5 x 30 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread L (mm) 25 Thread Ø (mm) 3.5 Thread Type 40° Single

Read more less

Used to secure plasterboard to timber stud work. • Phillips No.2 recess for a positive drive• Bugle head to reduce likelihood of damaging the board surface• 25° super sharp point for ease of penetration• Coarse thread for extreme hold• Fire Classification - A1 Brand TIMCO CE Standard BS EN 14566:2008 Colour Dark Grey Corrosion Rating (1-5) 1 - Clean, dry & low humidity environments Driver Bit Size PH2 Finish Dark Grey Phosphate Head Type Bugle L (mm) 32 Material Carbon Steel Pack Qty 1000 Point Type 25° Sharp Recess Type Phillips Size (mm) 3.5 x 32 Thread Coverage Fully Threaded Thread L (mm) 27 Thread Ø (mm) 3.5 Thread Type Coarse

Read more less

Used to secure plasterboard to drywall and ceiling track systems with a max. of 0.6mm thickness. • Phillips No.2 recess for a positive drive• Bugle head to reduce likelihood of damaging the board surface• 25° super sharp point for ease of penetration• 60° twin-thread offers excellent pull-out values and insertion speed• Fire Classification - A1 Brand TIMCO CE Standard BS EN 14566:2008 Corrosion Rating (1-5) 1 - Clean, dry & low humidity environments Driver Bit Size PH2 Finish Black Phosphate Head Type Bugle Material Carbon Steel MDT (mm) 0.6 Pack Qty 2000 Point Type 25° Sharp Recess Type Phillips Size (mm) 3.5 x 32 Thread Coverage Fully Threaded Thread L (mm) 27 Thread Ø (mm) 3.5 Thread Type Fine

Read more less

Used to secure plasterboard to timber stud work. • Phillips No.2 recess for a positive drive• Bugle head to reduce likelihood of damaging the board surface• 25° super sharp point for ease of penetration• Coarse thread for extreme hold• Fire Classification - A1 Brand TIMCO CE Standard BS EN 14566:2008 Colour Dark Grey Corrosion Rating (1-5) 1 - Clean, dry & low humidity environments Driver Bit Size PH2 Finish Dark Grey Phosphate Head Type Bugle L (mm) 35 Material Carbon Steel Pack Qty 1000 Point Type 25° Sharp Recess Type Phillips Size (mm) 3.5 x 35 Thread Coverage Fully Threaded Thread L (mm) 30 Thread Ø (mm) 3.5 Thread Type Coarse

Read more less

Used to secure plasterboard to timber stud work. • Phillips No.2 recess for a positive drive• Bugle head to reduce likelihood of damaging the board surface• 25° super sharp point for ease of penetration• Coarse thread for extreme hold• Fire Classification - A1 Brand TIMCO CE Standard BS EN 14566:2008 Colour Dark Grey Corrosion Rating (1-5) 1 - Clean, dry & low humidity environments Driver Bit Size PH2 Finish Dark Grey Phosphate Head Type Bugle L (mm) 38 Material Carbon Steel Pack Qty 1000 Point Type 25° Sharp Recess Type Phillips Size (mm) 3.5 x 38 Thread Coverage Fully Threaded Thread L (mm) 33 Thread Ø (mm) 3.5 Thread Type Coarse

Read more less

Used to secure plasterboard to drywall and ceiling track systems with a max. of 0.6mm thickness. • Phillips No.2 recess for a positive drive• Bugle head to reduce likelihood of damaging the board surface• 25° super sharp point for ease of penetration• 60° twin-thread offers excellent pull-out values and insertion speed• Fire Classification - A1 Brand TIMCO CE Standard BS EN 14566:2008 Corrosion Rating (1-5) 1 - Clean, dry & low humidity environments Driver Bit Size PH2 Finish Black Phosphate Head Type Bugle Material Carbon Steel MDT (mm) 0.6 Pack Qty 1500 Point Type 25° Sharp Recess Type Phillips Size (mm) 3.5 x 32 Thread Coverage Fully Threaded Thread L (mm) 27 Thread Ø (mm) 3.5 Thread Type Fine

Read more less

C2 is a revolutionary high-performance screw designed using modern manufacturing methods. Its superior holding strength in a wide variety of materials provides ultimate performance. • Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw• Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage• Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating• Dual angle thread for ultimate performance and exceptionally high pull-out resistance• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length Application Joinery, Carpentry, Timber Construction, Furniture Manufacturing Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 6 Head Ø (mm) 6.6 Head Type Double Countersunk Indoor/Outdoor Usage Indoor, Covered Outdoor L (inch) 1 1⁄2 L (mm) 40 Lubrication Gleitmo Material Hardened Steel Pack Qty 200 Pack Type Box Point Type Sharp Recess Type Pozi Resistant Type Corrosion-Resistant Size 3.5 x 40 Size (imp.) 6 x 1 1⁄2 Size (mm) 3.5 x 40 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread L (mm) 40 Thread Ø (mm) 3.5 Thread Type 40° Single

Read more less

Used to secure plasterboard to timber stud work. • Phillips No.2 recess for a positive drive• Bugle head to reduce likelihood of damaging the board surface• 25° super sharp point for ease of penetration• Coarse thread for extreme hold• Fire Classification - A1 Brand TIMCO CE Standard BS EN 14566:2008 Colour Dark Grey Corrosion Rating (1-5) 1 - Clean, dry & low humidity environments Driver Bit Size PH2 Finish Dark Grey Phosphate Head Type Bugle L (mm) 42 Material Carbon Steel Pack Qty 1000 Point Type 25° Sharp Recess Type Phillips Size (mm) 3.5 x 42 Thread Coverage Fully Threaded Thread L (mm) 37 Thread Ø (mm) 3.5 Thread Type Coarse

Read more less

A specialised fastener for fixing tongue and groove floorboards and panelling. It creates a secure and hidden fixture, allowing for a flush fit with the next board. C2 is a revolutionary high-performance screw designed using modern manufacturing methods and an innovative twin-cut point, ensuring consistent and rapid pick-up while reducing timber splitting. • Reduced head for concealed countersinking• Plain shank for pulling the two substrates together without manual clamping• Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating• Dual angle thread for ultimate performance and exceptionally high pull-out resistance• Patented twin cut technology for rapid "pick-up" and reduces timber splitting Application Tongue and Groove Boards and Panelling Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size TX10 Finish Zinc & Yellow Head Type Reduced Countersunk Included Items TX10 25mm Bit (Qty 1) Indoor/Outdoor Usage Indoor, Covered Outdoor L (inch) 1 3⁄4  L (mm) 45 Material Hardened Steel Pack Qty 200 Pack Type Box Point Type Twin-Cut Recess Type TX Drive Resistant Type Corrosion-Resistant Size (imp.) 6 x 1 3⁄4  Size (mm) 3.5 x 45 Substrates Hardwood, Softwood, Chipboard Thread L (mm) 30 Thread Ø (mm) 3.5 Thread Type 40° Single

Read more less

A specialised fastener for fixing tongue and groove floorboards and panelling. It creates a secure and hidden fixture, allowing for a flush fit with the next board. C2 is a revolutionary high-performance screw designed using modern manufacturing methods and an innovative twin-cut point, ensuring consistent and rapid pick-up while reducing timber splitting. • Reduced head for concealed countersinking• Plain shank for pulling the two substrates together without manual clamping• Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating• Dual angle thread for ultimate performance and exceptionally high pull-out resistance• Patented twin cut technology for rapid "pick-up" and reduces timber splitting Application Tongue and Groove Boards and Panelling Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size TX10 Finish Zinc & Yellow Head Type Reduced Countersunk Included Items TX10 25mm Bit (Qty 1) Indoor/Outdoor Usage Indoor, Covered Outdoor L (inch) 1 3⁄4  L (mm) 45 Material Hardened Steel Pack Qty 350 Pack Type Tub Point Type Twin-Cut Recess Type TX Drive Resistant Type Corrosion-Resistant Size (imp.) 6 x 1 3⁄4  Size (mm) 3.5 x 45 Substrates Hardwood, Softwood, Chipboard Thread L (mm) 30 Thread Ø (mm) 3.5 Thread Type 40° Single

Read more less

Used to secure plasterboard to timber stud work. • Phillips No.2 recess for a positive drive• Bugle head to reduce likelihood of damaging the board surface• 25° super sharp point for ease of penetration• Coarse thread for extreme hold• Fire Classification - A1 Brand TIMCO CE Standard BS EN 14566:2008 Colour Dark Grey Corrosion Rating (1-5) 1 - Clean, dry & low humidity environments Driver Bit Size PH2 Finish Dark Grey Phosphate Head Type Bugle L (mm) 45 Material Carbon Steel Pack Qty 1000 Point Type 25° Sharp Recess Type Phillips Size (mm) 3.5 x 45 Thread Coverage Fully Threaded Thread L (mm) 40 Thread Ø (mm) 3.5 Thread Type Coarse

Read more less

C2 is a revolutionary high-performance screw designed using modern manufacturing methods. Its superior holding strength in a wide variety of materials provides ultimate performance. • Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw• Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage• Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating• Dual angle thread for ultimate performance and exceptionally high pull-out resistance• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length Application Joinery, Carpentry, Timber Construction, Furniture Manufacturing Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 6 Head Ø (mm) 6.6 Head Type Double Countersunk Indoor/Outdoor Usage Indoor, Covered Outdoor L (inch) 1 1⁄2 L (mm) 40 Lubrication Gleitmo Material Hardened Steel Pack Qty 200 Pack Type Box Point Type Sharp Recess Type Pozi Resistant Type Corrosion-Resistant Size 3.5 x 50 Size (imp.) 6 x 2 Size (mm) 3.5 x 50 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread L (mm) 45 Thread Ø (mm) 3.5 Thread Type 40° Single

Read more less

Used to secure plasterboard to timber stud work. • Phillips No.2 recess for a positive drive• Bugle head to reduce likelihood of damaging the board surface• 25° super sharp point for ease of penetration• Coarse thread for extreme hold• Fire Classification - A1 Brand TIMCO CE Standard BS EN 14566:2008 Colour Dark Grey Corrosion Rating (1-5) 1 - Clean, dry & low humidity environments Driver Bit Size PH2 Finish Dark Grey Phosphate Head Type Bugle L (mm) 50 Material Carbon Steel Pack Qty 1000 Point Type 25° Sharp Recess Type Phillips Size (mm) 3.5 x 50 Thread Coverage Fully Threaded Thread L (mm) 45 Thread Ø (mm) 3.5 Thread Type Coarse

Read more less

Used to secure plasterboard to timber stud work. • Phillips No.2 recess for a positive drive• Bugle head to reduce likelihood of damaging the board surface• 25° super sharp point for ease of penetration• Coarse thread for extreme hold• Fire Classification - A1 Brand TIMCO CE Standard BS EN 14566:2008 Colour Dark Grey Corrosion Rating (1-5) 1 - Clean, dry & low humidity environments Driver Bit Size PH2 Finish Dark Grey Phosphate Head Type Bugle L (mm) 55 Material Carbon Steel Pack Qty 500 Point Type 25° Sharp Recess Type Phillips Size (mm) 3.5 x 55 Thread Coverage Fully Threaded Thread L (mm) 50 Thread Ø (mm) 3.5 Thread Type Coarse

Read more less

Used to secure plasterboard to timber stud work. • Phillips No.2 recess for a positive drive• Bugle head to reduce likelihood of damaging the board surface• 25° super sharp point for ease of penetration• Coarse thread for extreme hold• Fire Classification - A1 Brand TIMCO CE Standard BS EN 14566:2008 Colour Dark Grey Corrosion Rating (1-5) 1 - Clean, dry & low humidity environments Driver Bit Size PH2 Finish Dark Grey Phosphate Head Type Bugle L (mm) 60 Material Carbon Steel Pack Qty 500 Point Type 25° Sharp Recess Type Phillips Size (mm) 3.5 x 60 Thread Coverage Fully Threaded Thread L (mm) 50 Thread Ø (mm) 3.5 Thread Type Coarse

Read more less

A light duty metal to metal screw with a phillips recess used for interior applications. • Fire Classification - A1 CE Standard BS EN 14566:2008, BS EN 10666:2008 Corrosion Rating (1-5) 1 - Clean, dry & low humidity environments Driver Bit Size PH2 Finish Zinc Head Type Pan Material Carbon Steel MDT (mm) 2.5 Pack Qty 1000 Pack Type Box Point Type Self-Drilling Recess Type Phillips Size (mm) 3.9 x 11 Substrates Steel Thread Type Self-Tapping

Read more less

Designed for attaching dense board to timber stud work. The super sharp point and high low thread is specially designed for an excellent fixing into timber. • Phillips No.2 recess for a positive drive• Reduced countersunk head for improved countersinking into the dense board• High-Low thread for increased pull-out value into both timber and thin sheet metal• Coarse thread for extreme hold• 25° super sharp point for ease of penetration• Fire Classification - A1 CE Standard BS EN 14566:2008 Corrosion Rating (1-5) 1 - Clean, dry & low humidity environments Driver Bit Size PH2 Finish Black Phosphate Head Type Reduced Countersunk Material Carbon Steel Pack Qty 1000 Point Type 25° Sharp Recess Type Phillips Size (mm) 3.9 x 30 Thread L (mm) 25 Thread Type High-Low

Read more less

Designed for attaching dense board to timber stud work. The super sharp point and high low thread is specially designed for an excellent fixing into timber. • Phillips No.2 recess for a positive drive• Reduced countersunk head for improved countersinking into the dense board• High-Low thread for increased pull-out value into both timber and thin sheet metal• Coarse thread for extreme hold• 25° super sharp point for ease of penetration• Fire Classification - A1 CE Standard BS EN 14566:2008 Corrosion Rating (1-5) 1 - Clean, dry & low humidity environments Driver Bit Size PH2 Finish Black Phosphate Head Type Reduced Countersunk Material Carbon Steel Pack Qty 1000 Point Type 25° Sharp Recess Type Phillips Size (mm) 3.9 x 45 Thread L (mm) 40 Thread Type High-Low

Read more less

Designed for attaching dense board to timber stud work. The super sharp point and high low thread is specially designed for an excellent fixing into timber. • Phillips No.2 recess for a positive drive• Reduced countersunk head for improved countersinking into the dense board• High-Low thread for increased pull-out value into both timber and thin sheet metal• Coarse thread for extreme hold• 25° super sharp point for ease of penetration• Fire Classification - A1 CE Standard BS EN 14566:2008 Corrosion Rating (1-5) 1 - Clean, dry & low humidity environments Driver Bit Size PH2 Finish Black Phosphate Head Type Reduced Countersunk Material Carbon Steel Pack Qty 1000 Point Type 25° Sharp Recess Type Phillips Size (mm) 3.9 x 55 Thread L (mm) 50 Thread Type High-Low

Read more less

Strong versatile PVC tapes used for residue free masking and the jointing of PVC, polythene sheets and membranes. Frequently used for sealing contamination barriers, polythene dust sheets, silage covers and bales. • Flame retardant• Silage sheeting• Highly visible• Jointing• Patching• Masking• Residue free Colour Orange Finish Gloss L (m) 33 Material High Strength PVC W (mm) 50

Read more less

Strong versatile PVC tapes used for residue free masking and the jointing of PVC, polythene sheets and membranes. Frequently used for sealing contamination barriers, polythene dust sheets, silage covers and bales. • Flame retardant• Silage sheeting• Electrical• Jointing• Patching• Masking• Residue free Colour Black Finish Gloss L (m) 33 Material High Strength PVC W (mm) 75

Read more less

C2 is a revolutionary high-performance screw designed using modern manufacturing methods. Its superior holding strength in a wide variety of materials provides ultimate performance. • Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw• Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage• Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating• Dual angle thread for ultimate performance and exceptionally high pull-out resistance• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length Application Joinery, Carpentry, Timber Construction, Furniture Manufacturing Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 8 Head Ø (mm) 7.7 Head Type Double Countersunk Indoor/Outdoor Usage Indoor, Covered Outdoor L (inch) 1 L (mm) 25 Lubrication Gleitmo Material Hardened Steel Pack Qty 200 Pack Type Box Point Type Sharp Recess Type Pozi Resistant Type Corrosion-Resistant Size 4 x 25 Size (imp.) 8 x 1 Size (mm) 4.0 x 25 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread L (mm) 20 Thread Ø (mm) 4 Thread Type 40° Single

Read more less

C2 is a revolutionary high-performance screw designed using modern manufacturing methods and an innovative twin-cut point, ensuring consistent and rapid pick-up while reducing timber splitting. Its superior holding strength in a wide variety of materials provides ultimate performance. • Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw• Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage• Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating• Dual angle thread for ultimate performance and exceptionally high pull-out resistance• Patented twin cut technology for rapid "pick-up" and reduces timber splitting• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length Application Joinery, Carpentry, Timber Construction, Furniture Manufacturing Brand TIMCO CE Standard BS EN 14592:2008 Colour Yellow Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 8 Head Ø (mm) 7.7 Head Type Double Countersunk Indoor/Outdoor Usage Indoor, Covered Outdoor Inner Thread Ø d1 (mm) 2.35 L (inch) 1 1⁄4  L (mm) 30 Lubrication Gleitmo Material Hardened Steel Ø (mm) 4 Pack Qty 1000 Point Type Twin-Cut Recess Type Pozi Resistant Type Corrosion-Resistant Size 4.0 x 30 Size (imp.) 8 x 1 1⁄4  Size (mm) 4.0 x 30 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread Coverage Fully Threaded Thread L (mm) 25 Thread Ø (mm) 4 Thread Type 40° Single Deep  

Read more less

C2 is a revolutionary high-performance screw designed using modern manufacturing methods. Its superior holding strength in a wide variety of materials provides ultimate performance. • Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw• Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage• Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating• Dual angle thread for ultimate performance and exceptionally high pull-out resistance• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length Application Joinery, Carpentry, Timber Construction, Furniture Manufacturing Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 8 Head Ø (mm) 7.7 Head Type Double Countersunk Indoor/Outdoor Usage Indoor, Covered Outdoor L (inch) 1 1⁄4 L (mm) 30 Lubrication Gleitmo Material Hardened Steel Pack Qty 200 Pack Type Box Point Type Sharp Recess Type Pozi Resistant Type Corrosion-Resistant Size 4 x 30 Size (imp.) 8 x 1 1⁄4 Size (mm) 4.0 x 30 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread L (mm) 25 Thread Ø (mm) 4 Thread Type 40° Single

Read more less

A single thread woodscrew mainly used in various types of timber and man-made boards or into masonry with the use of a plastic plug. • Double countersunk reduces the likelihood of head shear and assists completion of countersinking• Wax lubricated to enhance screw insertion time, extra driving torque and resistance to corrosion• 40° deep single thread to provide a secure fixing with high pull-out resistance• 25° sharp point and single lead for a fast start and improved thread acceptance• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length Brand TIMCO CE Standard BS EN 14592:2008 Corrosion Rating (1-5) 1 - Clean, dry & low humidity environments Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 8 Head Ø (mm) 7.62 Head Type Double Countersunk Inner Thread Ø d1 (mm) 2.5 L (inch) 1 1⁄4  L (mm) 30 Lubrication Wax Material Carbon Steel Ø (mm) 4 Pack Qty 1000 Point Type 25° Sharp Recess Type Pozi Size (imp.) 8 x 1 1⁄4  Size (mm) 4.0 x 30 Substrates Softwood, Chipboard, MDF, Masonry (with plug) Thread Coverage Fully Threaded Thread L (mm) 25 Thread Ø (mm) 4 Thread Type 40° Single Deep

Read more less

C2 is a revolutionary high-performance screw designed using modern manufacturing methods. Its superior holding strength in a wide variety of materials provides ultimate performance. • Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw• Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage• Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating• Dual angle thread for ultimate performance and exceptionally high pull-out resistance• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length Application Joinery, Carpentry, Timber Construction, Furniture Manufacturing Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 8 Head Ø (mm) 7.7 Head Type Double Countersunk Indoor/Outdoor Usage Indoor, Covered Outdoor L (inch) 1 3⁄8 L (mm) 35 Lubrication Gleitmo Material Hardened Steel Pack Qty 200 Pack Type Box Point Type Sharp Recess Type Pozi Resistant Type Corrosion-Resistant Size 4 x 35 Size (imp.) 8 x 1 3⁄8 Size (mm) 4.0 x 35 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread L (mm) 30 Thread Ø (mm) 4 Thread Type 40° Single

Read more less

C2 is a revolutionary high-performance screw designed using modern manufacturing methods and an innovative twin-cut point, ensuring consistent and rapid pick-up while reducing timber splitting. Its superior holding strength in a wide variety of materials provides ultimate performance. • Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw• Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage• Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating• Dual angle thread for ultimate performance and exceptionally high pull-out resistance• Patented twin cut technology for rapid "pick-up" and reduces timber splitting• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length Application Joinery, Carpentry, Timber Construction, Furniture Manufacturing Brand TIMCO CE Standard BS EN 14592:2008 Colour Yellow Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 8 Head Ø (mm) 7.7 Head Type Double Countersunk Indoor/Outdoor Usage Indoor, Covered Outdoor Inner Thread Ø d1 (mm) 2.35 L (inch) 1 1⁄2  L (mm) 40 Lubrication Gleitmo Material Hardened Steel Ø (mm) 4 Pack Qty 1000 Point Type Twin-Cut Recess Type Pozi Resistant Type Corrosion-Resistant Size 4.0 x 40 Size (imp.) 8 x 1 1⁄2  Size (mm) 4.0 x 40 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread Coverage Fully Threaded Thread L (mm) 35 Thread Ø (mm) 4 Thread Type 40° Single Deep  

Read more less

C2 is a revolutionary high-performance screw designed using modern manufacturing methods. Its superior holding strength in a wide variety of materials provides ultimate performance. • Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw• Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage• Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating• Dual angle thread for ultimate performance and exceptionally high pull-out resistance• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length Application Joinery, Carpentry, Timber Construction, Furniture Manufacturing Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 8 Head Ø (mm) 7.7 Head Type Double Countersunk Indoor/Outdoor Usage Indoor, Covered Outdoor L (inch) 1 1⁄2 L (mm) 40 Lubrication Gleitmo Material Hardened Steel Pack Qty 200 Pack Type Box Point Type Sharp Recess Type Pozi Resistant Type Corrosion-Resistant Size 4 x 40 Size (imp.) 8 x 1 1⁄2 Size (mm) 4.0 x 40 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread L (mm) 35 Thread Ø (mm) 4 Thread Type 40° Single

Read more less

A single thread woodscrew mainly used in various types of timber and man-made boards or into masonry with the use of a plastic plug. • Double countersunk reduces the likelihood of head shear and assists completion of countersinking• Wax lubricated to enhance screw insertion time, extra driving torque and resistance to corrosion• 40° deep single thread to provide a secure fixing with high pull-out resistance• 25° sharp point and single lead for a fast start and improved thread acceptance• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length Brand TIMCO CE Standard BS EN 14592:2008 Corrosion Rating (1-5) 1 - Clean, dry & low humidity environments Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 8 Head Ø (mm) 7.62 Head Type Double Countersunk Inner Thread Ø d1 (mm) 2.5 L (inch) 1 1⁄2 L (mm) 40 Lubrication Wax Material Carbon Steel Ø (mm) 4 Pack Qty 1000 Point Type 25° Sharp Recess Type Pozi Size (imp.) 8 x 1 1⁄2 Size (mm) 4.0 x 40 Substrates Softwood, Chipboard, MDF, Masonry (with plug) Thread Coverage Fully Threaded Thread L (mm) 35 Thread Ø (mm) 4 Thread Type 40° Single Deep

Read more less

The unique patented Velocity screw has been specifically designed to give rapid installation into many different materials, whilst achieving exceptional pull-out resistance. It has been designed to give the user a consistent and reliable product that can be used in a variety of applications. • Dual angle thread designed for superior hold• Partially threaded stops the timber jacking. NOTE: Partially threaded from 40mm• Rapid drive twist cut enhances drive performance• Slash point tip helps prevent the timber splitting when screwing close to the edge, whilst also helping to reduce torque. NOTE: Slash point from 25mm and above Brand TIMCO CE Standard BS EN 14592:2008 Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 8 Head Ø (mm) 7.71 Head Type Double Countersunk with Ribs Inner Thread Ø d1 (mm) 2.52 L (inch) 1 1⁄2  L (mm) 40 Lubrication Wax Material Carbon Steel Ø (mm) 4 Pack Qty 1000 Point Type Single Slash Recess Type Pozi Shank Type Rapid Drive Twist Size (imp.) 8 x 1 1⁄2  Size (mm) 4.0 x 40 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread Coverage Partially Threaded Thread L (mm) 30 Thread Ø (mm) 4 Thread Type Serrated Dual Angle

Read more less

C2 is a revolutionary high-performance screw designed using modern manufacturing methods. Its superior holding strength in a wide variety of materials provides ultimate performance. • Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw• Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage• Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating• Dual angle thread for ultimate performance and exceptionally high pull-out resistance• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length Application Joinery, Carpentry, Timber Construction, Furniture Manufacturing Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 8 Head Ø (mm) 7.7 Head Type Double Countersunk Indoor/Outdoor Usage Indoor, Covered Outdoor L (inch) 1 3⁄4 L (mm) 40 Lubrication Gleitmo Material Hardened Steel Pack Qty 200 Pack Type Box Point Type Sharp Recess Type Pozi Resistant Type Corrosion-Resistant Size 4 x 45 Size (imp.) 8 x 1 3⁄4 Size (mm) 4.0 x 45 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread L (mm) 40 Thread Ø (mm) 4 Thread Type 40° Single

Read more less

C2 is a revolutionary high-performance screw designed using modern manufacturing methods and an innovative twin-cut point, ensuring consistent and rapid pick-up while reducing timber splitting. Its superior holding strength in a wide variety of materials provides ultimate performance. • Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw• Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage• Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating• Dual angle thread for ultimate performance and exceptionally high pull-out resistance• Patented twin cut technology for rapid "pick-up" and reduces timber splitting• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length Application Joinery, Carpentry, Timber Construction, Furniture Manufacturing Brand TIMCO CE Standard BS EN 14592:2008 Colour Yellow Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 8 Head Ø (mm) 7.7 Head Type Double Countersunk Indoor/Outdoor Usage Indoor, Covered Outdoor Inner Thread Ø d1 (mm) 2.35 L (inch) 2 L (mm) 50 Lubrication Gleitmo Material Hardened Steel Ø (mm) 4 Pack Qty 1000 Point Type Twin-Cut Recess Type Pozi Resistant Type Corrosion-Resistant Size 4.0 x 50 Size (imp.) 8 x 2 Size (mm) 4.0 x 50 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread Coverage Fully Threaded Thread L (mm) 45 Thread Ø (mm) 4 Thread Type 40° Single Deep  

Read more less

C2 is a revolutionary high-performance screw designed using modern manufacturing methods. Its superior holding strength in a wide variety of materials provides ultimate performance. • Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw• Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage• Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating• Dual angle thread for ultimate performance and exceptionally high pull-out resistance• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length Application Joinery, Carpentry, Timber Construction, Furniture Manufacturing Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 8 Head Ø (mm) 7.7 Head Type Double Countersunk Indoor/Outdoor Usage Indoor, Covered Outdoor L (inch) 2 L (mm) 50 Lubrication Gleitmo Material Hardened Steel Pack Qty 200 Pack Type Box Point Type Sharp Recess Type Pozi Resistant Type Corrosion-Resistant Size 4 x 50 Size (imp.) 8 x 2 Size (mm) 4.0 x 50 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread L (mm) 45 Thread Ø (mm) 4 Thread Type 40° Single

Read more less

A single thread woodscrew mainly used in various types of timber and man-made boards or into masonry with the use of a plastic plug. • Double countersunk reduces the likelihood of head shear and assists completion of countersinking• Wax lubricated to enhance screw insertion time, extra driving torque and resistance to corrosion• 40° deep single thread to provide a secure fixing with high pull-out resistance• 25° sharp point and single lead for a fast start and improved thread acceptance• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length Brand TIMCO CE Standard BS EN 14592:2008 Corrosion Rating (1-5) 1 - Clean, dry & low humidity environments Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 8 Head Ø (mm) 7.62 Head Type Double Countersunk Inner Thread Ø d1 (mm) 2.5 L (inch) 2 L (mm) 50 Lubrication Wax Material Carbon Steel Ø (mm) 4 Pack Qty 1000 Point Type 25° Sharp Recess Type Pozi Size (imp.) 8 x 2 Size (mm) 4.0 x 50 Substrates Softwood, Chipboard, MDF, Masonry (with plug) Thread Coverage Fully Threaded Thread L (mm) 45 Thread Ø (mm) 4 Thread Type 40° Single Deep

Read more less

The unique patented Velocity screw has been specifically designed to give rapid installation into many different materials, whilst achieving exceptional pull-out resistance. It has been designed to give the user a consistent and reliable product that can be used in a variety of applications. • Dual angle thread designed for superior hold• Partially threaded stops the timber jacking. NOTE: Partially threaded from 40mm• Rapid drive twist cut enhances drive performance• Slash point tip helps prevent the timber splitting when screwing close to the edge, whilst also helping to reduce torque. NOTE: Slash point from 25mm and above Brand TIMCO CE Standard BS EN 14592:2008 Corrosion Rating (1-5) 2 - Occasionally damp/wet, rural and sheltered areas Driver Bit Size PZ2 Finish Zinc & Yellow Gauge 8 Head Ø (mm) 7.71 Head Type Double Countersunk with Ribs Inner Thread Ø d1 (mm) 2.52 L (inch) 2 L (mm) 50 Lubrication Wax Material Carbon Steel Ø (mm) 4 Pack Qty 1000 Point Type Single Slash Recess Type Pozi Shank Type Rapid Drive Twist Size (imp.) 8 x 2 Size (mm) 4.0 x 50 Substrates Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal Thread Coverage Partially Threaded Thread L (mm) 30 Thread Ø (mm) 4 Thread Type Serrated Dual Angle

Read more less