Other

A Vernier caliper is a precision measuring tool used to measure the dimensions of an object with high accuracy. It consists of a main scale and a sliding Vernier scale, which allows users to take very precise measurements. The caliper has several parts: Outside Jaws for measuring the external diameter or width. Inside Jaws for measuring the internal diameter. Depth Gauge for measuring depth. Scale marked in both millimeters and inches. Vernier calipers are widely used in various fields, like engineering, metalworking, and woodworking, where precise measurements are essential. They typically allow measurements accurate to 0.02 mm, making them ideal for detailed work.

Read more less

Enhance your home's energy efficiency with our Pack of 6 Reusable Magnetic Radiator Reflector Sheets. Designed for steel, water-filled, non-electrical radiators up to 1200 x 600mm, these sheets effectively reduce heat loss through walls and lower carbon emissions. Installation is quick and easy—no need to remove the radiator. Simply cut to the desired size using household scissors and attach. Start conserving energy today with this simple yet effective solution.

Read more less

Boresite heavy duty plasterboard wall fixings are designed to provide a secure mounting solution for heavy items without the need for additional support. Each fixing is engineered to hold up to 35 kgs of weight, ensuring reliable performance. • Hold up to 35kgs per wall fixing• Designed for 12.5mm plasterboards• For stud walls with 15mm cavity• Simple drill free installation• Patented design to maximise load to cost• Made with engineering PA6 polymer Instructions 1️⃣ Mark a screw hole and cutting slot on the wall using the included marking template2️⃣ Cut a 3mm thick slot with a drywall saw or utility knife where marked3️⃣ Straighten Section B until at 90° to Section A and the band is under tension4️ Insert into the drywall slot until Section A makes contact with the wall5️ Mount your hook or bracket to the wall using the included screws Please Note:Boresite works by spreading the load over a large surface area of Plasterboard and relies on the screw engaging through the hole in Section B. It is the user’s responsibility to ensure proper engagement by following good installation practice. The manufacturer or Frank's Fasteners is not responsible for damage, destruction or loss of property or belongings due to incorrect installation.

Read more less

Boresite heavy duty plasterboard wall fixings are designed to provide a secure mounting solution for heavy items without the need for additional support. Each fixing is engineered to hold up to 35 kgs of weight, ensuring reliable performance. • Hold up to 35kgs per wall fixing• Designed for 12.5mm plasterboards• For stud walls with 15mm cavity• Simple drill free installation• Patented design to maximise load to cost• Made with engineering PA6 polymer Instructions 1️⃣ Mark a screw hole and cutting slot on the wall using the included marking template2️⃣ Cut a 3mm thick slot with a drywall saw or utility knife where marked3️⃣ Straighten Section B until at 90° to Section A and the band is under tension4️ Insert into the drywall slot until Section A makes contact with the wall5️ Mount your hook or bracket to the wall using the included screws Please Note:Boresite works by spreading the load over a large surface area of Plasterboard and relies on the screw engaging through the hole in Section B. It is the user’s responsibility to ensure proper engagement by following good installation practice. The manufacturer or Frank's Fasteners is not responsible for damage, destruction or loss of property or belongings due to incorrect installation.

Read more less

Boresite heavy duty plasterboard wall fixings are designed to provide a secure mounting solution for heavy items without the need for additional support. Each fixing is engineered to hold up to 35 kgs of weight, ensuring reliable performance. • Hold up to 35kgs per wall fixing• Designed for 12.5mm plasterboards• For stud walls with 15mm cavity• Simple drill free installation• Patented design to maximise load to cost• Made with engineering PA6 polymer Instructions 1️⃣ Mark a screw hole and cutting slot on the wall using the included marking template2️⃣ Cut a 3mm thick slot with a drywall saw or utility knife where marked3️⃣ Straighten Section B until at 90° to Section A and the band is under tension4️ Insert into the drywall slot until Section A makes contact with the wall5️ Mount your hook or bracket to the wall using the included screws Please Note:Boresite works by spreading the load over a large surface area of Plasterboard and relies on the screw engaging through the hole in Section B. It is the user’s responsibility to ensure proper engagement by following good installation practice. The manufacturer or Frank's Fasteners is not responsible for damage, destruction or loss of property or belongings due to incorrect installation.

Read more less

As well as crimping red, blue and yellow pre-insulated terminals, it also strips & cuts wire between 0.75mm² & 6mm²

Read more less

Marks a fixing point through fittings or fixtures at depths up to 100mm. A unique patented tool designed so that one push quickly, easily and marks almost any surface. Push the Marxman pen into the fixture hole, and a burst of bright green chalk will mark the surface with the required drill hole point. • Bright green visible marker• Approx. 250 bursts• Fixture marking over 50mm up to a depth of 100mm• Easy to remove• UK designed & manufactured• As seen on TV from BBC's Dragon's Den

Read more less

Marks a fixing point through fittings or fixtures at depths up to 50mm. A unique patented tool designed so that one push quickly, easily and marks almost any surface. Push the Marxman pen into the fixture hole, and a burst of bright green chalk will mark the surface with the required drill hole point. • Bright green visible marker• Approx. 250 bursts• Fixture marking depth up to 50mm• Easy to remove• UK designed & manufactured• As seen on TV from BBC's Dragon's Den

Read more less

9 Compartments For small parts Transparent lid Metal flip up catch Lightweight yet tough Combination of plastic and metal on the handle give a comfortable, firm grip when carrying around

Read more less

Plastic Box (+ 8 dividers) Assorted boxes with movable dividers. Minimum compartment size: 25x65mm. 8 dividers included. Max. number of compartments: 16 Min. number of compartments: 2 Please note, that the vertical divider in the middle is fixed.

Read more less

A PZ2 25mm Hex Shank Screwdriver Bit is a commonly used tool designed to fit screws with a Pozidriv (PZ) head, specifically size PZ2. This type of bit is widely used in construction, DIY projects, and various mechanical applications.  PZ2: This refers to the Pozidriv screw size that the bit is designed to fit. PZ2 is one of the most commonly used sizes for medium screws. 25mm: This is the length of the bit, making it compact and suitable for tasks in confined spaces. Hex Shank: The hexagonal-shaped shank allows for a secure fit in drills, drivers, or bit holders, providing a stable grip during use. Pozidriv bits are an improvement on the classic Phillips bit, designed to offer better torque transfer and reduce the likelihood of cam-out (slipping).

Read more less

The Soudal Swipex wipes are designed for the quick and effective removal of adhesives, sealants, oils, paints and greases from hands, tools and non-porous surfaces. Key Features Removes many types of contaminants 100 wipes per tub Kind to skin Foil Seal Cleans hands, tools & surfaces

Read more less

Ultraloc® Super Glue Gel is a high performance cyanoacrylate-based adhesive that provides permanent, instant bonds on a wide variety of materials. It has a slightly thicker formula than Ultraloc® Super Glue Liquid and is better suited on slightly porous surfaces. Its thickness also provides a better join in applications where the broken joint is not a perfect fit. Ultraloc® Super Glue Gel can be used to bond ceramics, electronics, leather, metals, most plastics, rubber, wood and much more. Suitable for DIY, crafting and general repairs around the home, the versatile adhesive has a precision nozzle with drop control for accurate application that's ideal for small, intricate jobs. Arriving in a 3g reusable tube, the adhesive's safety cap incorporates an anti-clog pin for ease of use time after time. Features: Ultraloc Precision Instant Bond Super Glue Gel - 3g Bonds most non-porous materials together including ceramics, leather, metal, rubber, wood and most plastics Dries colourless Extra strong Instant bond, full bond strength after 12 hours Directions for Use: Ensure surfaces to be bonded are clean, dry and free from loose debris, dirt, dust and grease Apply one drop to ONLY one of the surfaces to be bonded Do not spread, simply align surfaces then press together applying light pressure Allow several minutes to set, for maximum bond strength leave to cure for 12 hours After use, clean nozzle with a dry cloth Replace cap. Store in a cool, dry place

Read more less

Ultraloc® Super Glue Liquid is a high performance cyanoacrylate-based adhesive that provides permanent, instant bonds on a wide variety of materials. It can be used to bond ceramics, electronics, leather, metals, most plastics, rubber, wood and much more. Suitable for DIY, crafting and general repairs around the home, the versatile adhesive has a precision nozzle with drop control for accurate application that's ideal for small, intricate jobs. Arriving in a 3g reusable tube, the adhesive's safety cap incorporates an anti-clog pin for ease of use time after time. For applications where the broken joint is not a perfect fit, use Ultraloc® Super Glue Gel that has a slightly thicker formula for enhanced results. Features: Ultraloc Precision Instant Bond Super Glue Liquid - 3g Bonds most non-porous materials together including ceramics, leather, metal, rubber, wood and most plastics Dries colourless Extra strong Instant bond, full bond strength after 12 hours Directions for Use: Ensure surfaces to be bonded are clean, dry and free from loose debris, dirt, dust and grease Apply one drop to ONLY one of the surfaces to be bonded Do not spread, simply align surfaces then press together applying light pressure Allow several minutes to set, for maximum bond strength leave to cure for 12 hours After use, clean nozzle with a dry cloth Replace cap. Store in a cool, dry place

Read more less