Flat Washers

Material Steel Finish Zinc Plated Manufacturing Standard DIN 125 - Form A For Use With Thread Size M2.5 (2.5mm) Internal Diameter (ID) 2.7mm External Diameter (OD) 6mm External Diameter (OD) Tolerance +0/-0.3mm Thickness (T) 0.55mm Thickness (T) Tolerance +0/-0.1mm  

Read more less

Material Plastic Polyamide Nylon 6.6 Manufacturing Standard DIN 125 - Form A For Use With Thread Size M3 (3mm) Internal Diameter (ID) 3.2mm External Diameter (OD) 7mm External Diameter (OD) Tolerance +0/-0.36mm Thickness (T) 0.55mm Thickness (T) Tolerance +0/-0.1mm See a problem with this specification? Let us know.

Read more less

Material Stainless Steel (A2) Finish CB10 Manufacturing Standard DIN 125 - Form A For Use With Thread Size M3 (3mm) Internal Diameter (ID) 3.2mm External Diameter (OD) 7mm External Diameter (OD) Tolerance +0/-0.36mm Thickness (T) 0.55mm Thickness (T) Tolerance +0/-0.1mm   See a problem with this specification? Let us know.

Read more less

Material Brass Finish Natural Manufacturing Standard DIN 125 - Form A For Use With Thread Size M3 (3mm) Internal Diameter (ID) 3.2mm External Diameter (OD) 7mm External Diameter (OD) Tolerance +0/-0.36mm Thickness (T) 0.55mm Thickness (T) Tolerance +0/-0.1mm   See a problem with this specification? Let us know.

Read more less

Material Brass Finish Nickel Plated Manufacturing Standard DIN 125 - Form A For Use With Thread Size M3 (3mm) Internal Diameter (ID) 3.2mm External Diameter (OD) 7mm External Diameter (OD) Tolerance +0/-0.36mm Thickness (T) 0.55mm Thickness (T) Tolerance +0/-0.1mm   Nickel-plated brass and plain brass are two metals that have many similarities in composition. Both are composed of copper and zinc but differ in their uses and applications. Knowing the difference between these metals is important when selecting hardware for projects or products. Let’s take a look at what sets nickel-plated brass and plain brass apart from each other. What is Nickel Plated Brass? Nickel-plated brass is a metal that has been electroplated with a layer of nickel. This layer helps create a protective coating on the surface of the metal and can help resist corrosion and tarnishing. It also gives the metal a polished look that may vary depending on the thickness of the coating. This type of metal is often used in applications where it will be exposed to moisture, such as plumbing fixtures or outdoor furniture. What is Plain Brass? Plain brass is composed of copper and zinc without any additional coatings or treatments applied to the surface. It’s commonly used for decorative purposes due to its bright gold colour, but it can also be used for functional applications such as electrical components or machine parts. Unlike nickel-plated brass, plain brass does not have added protection from corrosion, so it does require more maintenance to keep it looking shiny. Difference Between Nickel Plated Brass and Brass Nickel plated brass is more resistant to corrosion than brass. Nickel plated brass is more wear resistant than brass. Nickel plated brass is more heat resistant than brass. Nickel plated brass is more electrically conductive than brass. Nickel plated brass is more aesthetically pleasing than brass. Nickel plated brass is more expensive than brass. Conclusion: When selecting hardware for your project or product, it’s important to understand the differences between nickel-plated brass and plain brass before making your decision. Nickel-plated brass has a protective layer on its surface that helps resist corrosion, while plain brass does not have this added protection but may be more appropriate if you are looking for decorative elements with its bright gold colour. Consider how your project will be used when deciding which type of metal you should use for maximum durability and longevity.

Read more less

Material Stainless Steel (A2) Finish Natural Manufacturing Standard DIN 125 - Form A For Use With Thread Size M3 (3mm) Internal Diameter (ID) 3.2mm External Diameter (OD) 7mm External Diameter (OD) Tolerance +0/-0.36mm Thickness (T) 0.55mm Thickness (T) Tolerance +0/-0.1mm   See a problem with this specification? Let us know.

Read more less

Material Stainless Steel (A4) Finish Natural Manufacturing Standard DIN 125 - Form A For Use With Thread Size M3 (3mm) Internal Diameter (ID) 3.2mm External Diameter (OD) 7mm External Diameter (OD) Tolerance +0/-0.36mm Thickness (T) 0.55mm Thickness (T) Tolerance +0/-0.1mm   See a problem with this specification? Let us know.

Read more less

Material Steel Finish Zinc Plated Manufacturing Standard DIN 125 - Form A For Use With Thread Size M3 (3mm) Internal Diameter (ID) 3.2mm External Diameter (OD) 7mm External Diameter (OD) Tolerance +0/-0.36mm Thickness (T) 0.55mm Thickness (T) Tolerance +0/-0.1mm   See a problem with this specification? Let us know.

Read more less

Material Aluminium Finish Natural Manufacturing Standard DIN 125 - Form A For Use With Thread Size M3 (3mm) Internal Diameter (ID) 3.2mm External Diameter (OD) 7mm External Diameter (OD) Tolerance +0/-0.36mm Thickness (T) 0.55mm Thickness (T) Tolerance +0/-0.1mm   Ensure a secure and corrosion-resistant fastening with our M3 Form A Flat Washers made from high-quality Aluminium. Designed to DIN 125 standards, these flat washers provide an even load distribution under the head of a bolt or screw, preventing surface damage and enhancing joint integrity. Ideal for lightweight applications, the aluminium construction offers excellent resistance to rust, making them perfect for use in damp or outdoor environments. These 3.2mm internal diameter washers are commonly used in electrical, automotive, marine, and general engineering industries where non-magnetic and lightweight properties are essential.

Read more less

Material Stainless Steel (A2) Finish Natural Manufacturing Standard DIN 125 - Form A For Use With Thread Size M3.5 (3.5mm) Internal Diameter (ID) 3.7mm External Diameter (OD) 8mm External Diameter (OD) Tolerance +0/-0.36mm Thickness (T) 0.55mm Thickness (T) Tolerance +0/-0.1mm   See a problem with this specification? Let us know.

Read more less

Material Plastic Polyamide Nylon 6.6 Manufacturing Standard DIN 125 - Form A For Use With Thread Size M4 (4mm) Internal Diameter (ID) 4.3mm External Diameter (OD) 9mm External Diameter (OD) Tolerance +0/-0.36mm Thickness (T) 0.9mm Thickness (T) Tolerance +0/-0.2mm See a problem with this specification? Let us know.

Read more less

Material Stainless Steel (A2) Finish CB10 Manufacturing Standard DIN 125 - Form A For Use With Thread Size M4 (4mm) Internal Diameter (ID) 4.3mm External Diameter (OD) 9mm External Diameter (OD) Tolerance +0/-0.36mm Thickness (T) 0.9mm Thickness (T) Tolerance +0/-0.2mm   See a problem with this specification? Let us know.

Read more less

Material Brass Finish Natural Manufacturing Standard DIN 125 - Form A For Use With Thread Size M4 (4mm) Internal Diameter (ID) 4.3mm External Diameter (OD) 9mm External Diameter (OD) Tolerance +0/-0.36mm Thickness (T) 0.9mm Thickness (T) Tolerance +0/-0.2mm   See a problem with this specification? Let us know.

Read more less

Material Stainless Steel (A2) Finish Natural Manufacturing Standard DIN 125 - Form A For Use With Thread Size M4 (4mm) Internal Diameter (ID) 4.3mm External Diameter (OD) 9mm External Diameter (OD) Tolerance +0/-0.36mm Thickness (T) 0.9mm Thickness (T) Tolerance +0/-0.2mm   See a problem with this specification? Let us know.

Read more less

Material Stainless Steel (A4) Finish Natural Manufacturing Standard DIN 125 - Form A For Use With Thread Size M4 (4mm) Internal Diameter (ID) 4.3mm External Diameter (OD) 9mm External Diameter (OD) Tolerance +0/-0.36mm Thickness (T) 0.9mm Thickness (T) Tolerance +0/-0.2mm   See a problem with this specification? Let us know.

Read more less

Material Steel Finish Zinc Plated Manufacturing Standard DIN 125 - Form A For Use With Thread Size M4 (4mm) Internal Diameter (ID) 4.3mm External Diameter (OD) 9mm External Diameter (OD) Tolerance +0/-0.36mm Thickness (T) 0.9mm Thickness (T) Tolerance +0/-0.2mm  

Read more less

Material Steel Finish Zinc Plated Yellow Passivated Manufacturing Standard DIN 125 - Form A For Use With Thread Size M4 (4mm) Internal Diameter (ID) 4.3mm External Diameter (OD) 9mm External Diameter (OD) Tolerance +0/-0.36mm Thickness (T) 0.9mm Thickness (T) Tolerance +0/-0.2mm   See a problem with this specification? Let us know.

Read more less

Material Aluminium Finish Natural Manufacturing Standard DIN 125 - Form A For Use With Thread Size M4 (4mm) Internal Diameter (ID) 4.3mm External Diameter (OD) 9mm External Diameter (OD) Tolerance +0/-0.36mm Thickness (T) 0.9mm Thickness (T) Tolerance +0/-0.2mm   Ensure a secure and corrosion-resistant fastening with our M4 Form A Flat Washers made from high-quality Aluminium. Designed to DIN 125 standards, these flat washers provide an even load distribution under the head of a bolt or screw, preventing surface damage and enhancing joint integrity. Ideal for lightweight applications, the aluminium construction offers excellent resistance to rust, making them perfect for use in damp or outdoor environments. These 4.3mm internal diameter washers are commonly used in electrical, automotive, marine, and general engineering industries where non-magnetic and lightweight properties are essential.

Read more less

Material Plastic Polyamide Nylon 6.6 Manufacturing Standard DIN 125 - Form A For Use With Thread Size M5 (5mm) Internal Diameter (ID) 5.3mm External Diameter (OD) 10mm External Diameter (OD) Tolerance +0/-0.36mm Thickness (T) 1.1mm Thickness (T) Tolerance +0/-0.2mm See a problem with this specification? Let us know.

Read more less

Material Stainless Steel (A2) Finish CB10 Manufacturing Standard DIN 125 - Form A For Use With Thread Size M5 (5mm) Internal Diameter (ID) 5.3mm External Diameter (OD) 10mm External Diameter (OD) Tolerance +0/-0.36mm Thickness (T) 1.1mm Thickness (T) Tolerance +0/-0.2mm   See a problem with this specification? Let us know.

Read more less

Material Brass Finish Natural Manufacturing Standard DIN 125 - Form A For Use With Thread Size M5 (5mm) Internal Diameter (ID) 5.3mm External Diameter (OD) 10mm External Diameter (OD) Tolerance +0/-0.36mm Thickness (T) 1.1mm Thickness (T) Tolerance +0/-0.2mm   See a problem with this specification? Let us know.

Read more less

Material Stainless Steel (A2) Finish Natural Manufacturing Standard DIN 125 - Form A For Use With Thread Size M5 (5mm) Internal Diameter (ID) 5.3mm External Diameter (OD) 10mm External Diameter (OD) Tolerance +0/-0.36mm Thickness (T) 1.1mm Thickness (T) Tolerance +0/-0.2mm   See a problem with this specification? Let us know.

Read more less

Material Stainless Steel (A4) Finish Natural Manufacturing Standard DIN 125 - Form A For Use With Thread Size M5 (5mm) Internal Diameter (ID) 5.3mm External Diameter (OD) 10mm External Diameter (OD) Tolerance +0/-0.36mm Thickness (T) 1.1mm Thickness (T) Tolerance +0/-0.2mm   See a problem with this specification? Let us know.

Read more less

Material Steel Finish Natural Manufacturing Standard DIN 125 - Form A For Use With Thread Size M5 (5mm) Internal Diameter (ID) 5.3mm External Diameter (OD) 10mm External Diameter (OD) Tolerance +0/-0.36mm Thickness (T) 1.1mm Thickness (T) Tolerance +0/-0.2mm   See a problem with this specification? Let us know.

Read more less

Material Steel Finish Zinc Plated Manufacturing Standard DIN 125 - Form A For Use With Thread Size M5 (5mm) Internal Diameter (ID) 5.3mm External Diameter (OD) 10mm External Diameter (OD) Tolerance +0/-0.36mm Thickness (T) 1.1mm Thickness (T) Tolerance +0/-0.2mm  

Read more less

Material Steel Finish Zinc Plated Yellow Passivated Manufacturing Standard DIN 125 - Form A For Use With Thread Size M5 (5mm) Internal Diameter (ID) 5.3mm External Diameter (OD) 10mm External Diameter (OD) Tolerance +0/-0.36mm Thickness (T) 1.1mm Thickness (T) Tolerance +0/-0.2mm   See a problem with this specification? Let us know.

Read more less

Material Aluminium Finish Natural Manufacturing Standard DIN 125 - Form A For Use With Thread Size M5 (5mm) Internal Diameter (ID) 5.3mm External Diameter (OD) 10mm External Diameter (OD) Tolerance +0/-0.36mm Thickness (T) 1.1mm Thickness (T) Tolerance +0/-0.2mm   Ensure a secure and corrosion-resistant fastening with our M5 Form A Flat Washers made from high-quality Aluminium. Designed to DIN 125 standards, these flat washers provide an even load distribution under the head of a bolt or screw, preventing surface damage and enhancing joint integrity. Ideal for lightweight applications, the aluminium construction offers excellent resistance to rust, making them perfect for use in damp or outdoor environments. These 5.3mm internal diameter washers are commonly used in electrical, automotive, marine, and general engineering industries where non-magnetic and lightweight properties are essential.

Read more less

Material Steel Finish Zinc Plated Yellow Passivated Manufacturing Standard NF E25-513 - Form M For Use With Thread Size M5 (5mm) Internal Diameter (ID) 5.3mm External Diameter (OD) 12mm Thickness (T) 21mm  

Read more less

Material Steel Finish Zinc Plated Yellow Passivated For Use With Thread Size M5 (5mm) Internal Diameter (ID) 5.3mm External Diameter (OD) 15mm Thickness (T) 1.2mm  

Read more less

Material Plastic Polyamide Nylon 6.6 Manufacturing Standard DIN 125 - Form A For Use With Thread Size M6 (6mm) Internal Diameter (ID) 6.4mm External Diameter (OD) 12mm External Diameter (OD) Tolerance +0/-0.43mm Thickness (T) 1.8mm Thickness (T) Tolerance +0/-0.4mm See a problem with this specification? Let us know.

Read more less

Material Stainless Steel (A2) Finish CB10 Manufacturing Standard DIN 125 - Form A For Use With Thread Size M6 (6mm) Internal Diameter (ID) 6.4mm External Diameter (OD) 12mm External Diameter (OD) Tolerance +0/-0.43mm Thickness (T) 1.8mm Thickness (T) Tolerance +0/-0.4mm   See a problem with this specification? Let us know.

Read more less

Material Brass Finish Natural Manufacturing Standard DIN 125 - Form A For Use With Thread Size M6 (6mm) Internal Diameter (ID) 6.4mm External Diameter (OD) 12mm External Diameter (OD) Tolerance +0/-0.43mm Thickness (T) 1.8mm Thickness (T) Tolerance +0/-0.4mm   See a problem with this specification? Let us know.

Read more less

Material Stainless Steel (A2) Finish Natural Manufacturing Standard DIN 125 - Form A For Use With Thread Size M6 (6mm) Internal Diameter (ID) 6.4mm External Diameter (OD) 12mm External Diameter (OD) Tolerance +0/-0.43mm Thickness (T) 1.8mm Thickness (T) Tolerance +0/-0.4mm   See a problem with this specification? Let us know.

Read more less

Material Stainless Steel (A4) Finish Natural Manufacturing Standard DIN 125 - Form A For Use With Thread Size M6 (6mm) Internal Diameter (ID) 6.4mm External Diameter (OD) 12mm External Diameter (OD) Tolerance +0/-0.43mm Thickness (T) 1.8mm Thickness (T) Tolerance +0/-0.4mm   See a problem with this specification? Let us know.

Read more less

Material Steel Finish Natural Manufacturing Standard DIN 125 - Form A For Use With Thread Size M6 (6mm) Internal Diameter (ID) 6.4mm External Diameter (OD) 12mm External Diameter (OD) Tolerance +0/-0.43mm Thickness (T) 1.8mm Thickness (T) Tolerance +0/-0.4mm   See a problem with this specification? Let us know.

Read more less

Material Steel Finish Zinc Plated Manufacturing Standard DIN 125 - Form A For Use With Thread Size M6 (6mm) Internal Diameter (ID) 6.4mm External Diameter (OD) 12mm External Diameter (OD) Tolerance +0/-0.43mm Thickness (T) 1.8mm Thickness (T) Tolerance +0/-0.4mm  

Read more less

Material Aluminium Finish Natural Manufacturing Standard DIN 125 - Form A For Use With Thread Size M6 (6mm) Internal Diameter (ID) 6.4mm External Diameter (OD) 12mm External Diameter (OD) Tolerance +0/-0.43mm Thickness (T) 1.8mm Thickness (T) Tolerance +0/-0.4mm   Ensure a secure and corrosion-resistant fastening with our M6 Form A Flat Washers made from high-quality Aluminium. Designed to DIN 125 standards, these flat washers provide an even load distribution under the head of a bolt or screw, preventing surface damage and enhancing joint integrity. Ideal for lightweight applications, the aluminium construction offers excellent resistance to rust, making them perfect for use in damp or outdoor environments. These 6.4mm internal diameter washers are commonly used in electrical, automotive, marine, and general engineering industries where non-magnetic and lightweight properties are essential.

Read more less

Material Steel Finish Zinc Plated Yellow Passivated Manufacturing Standard NF E25-513 - Form M For Use With Thread Size M6 (6mm) Internal Diameter (ID) 6.4mm External Diameter (OD) 14mm Thickness (T) 1.2mm   See a problem with this specification? Let us know.

Read more less

Material Steel Finish Zinc Plated Yellow Passivated For Use With Thread Size M6 (6mm) Internal Diameter (ID) 6.4mm External Diameter (OD) 25mm Thickness (T) 1.25mm  

Read more less

Material Steel Finish Zinc Plated Yellow Passivated For Use With Thread Size M6 (6mm) Internal Diameter (ID) 6.4mm External Diameter (OD) 30mm Thickness (T) 1.25mm  

Read more less

Material Brass Finish Natural Manufacturing Standard DIN 125 - Form A For Use With Thread Size M7 (7mm) Internal Diameter (ID) 7.4mm External Diameter (OD) 14mm External Diameter (OD) Tolerance +0/-0.43mm Thickness (T) 1.8mm Thickness (T) Tolerance +0/-0.4mm   See a problem with this specification? Let us know.

Read more less

Material Stainless Steel (A2) Finish Natural Manufacturing Standard DIN 125 - Form A For Use With Thread Size M7 (7mm) Internal Diameter (ID) 7.4mm External Diameter (OD) 14mm External Diameter (OD) Tolerance +0/-0.43mm Thickness (T) 1.8mm Thickness (T) Tolerance +0/-0.4mm   See a problem with this specification? Let us know.

Read more less

Material Stainless Steel (A4) Finish Natural Manufacturing Standard DIN 125 - Form A For Use With Thread Size M7 (7mm) Internal Diameter (ID) 7.4mm External Diameter (OD) 14mm External Diameter (OD) Tolerance +0/-0.43mm Thickness (T) 1.8mm Thickness (T) Tolerance +0/-0.4mm   See a problem with this specification? Let us know.

Read more less

Material Steel Finish Zinc Plated Manufacturing Standard DIN 125 - Form A For Use With Thread Size M7 (7mm) Internal Diameter (ID) 7.4mm External Diameter (OD) 14mm External Diameter (OD) Tolerance +0/-0.43mm Thickness (T) 1.8mm Thickness (T) Tolerance +0/-0.4mm  

Read more less

Material Plastic Polyamide Nylon 6.6 Manufacturing Standard DIN 125 - Form A For Use With Thread Size M8 (8mm) Internal Diameter (ID) 8.4mm External Diameter (OD) 16mm External Diameter (OD) Tolerance +0/-0.43mm Thickness (T) 1.8mm Thickness (T) Tolerance +0/-0.4mm See a problem with this specification? Let us know.

Read more less

Material Stainless Steel (A2) Finish CB10 Manufacturing Standard DIN 125 - Form A For Use With Thread Size M8 (8mm) Internal Diameter (ID) 8.4mm External Diameter (OD) 16mm External Diameter (OD) Tolerance +0/-0.43mm Thickness (T) 1.8mm Thickness (T) Tolerance +0/-0.4mm   See a problem with this specification? Let us know.

Read more less

Material Brass Finish Natural Manufacturing Standard DIN 125 - Form A For Use With Thread Size M8 (8mm) Internal Diameter (ID) 8.4mm External Diameter (OD) 16mm External Diameter (OD) Tolerance +0/-0.43mm Thickness (T) 1.8mm Thickness (T) Tolerance +0/-0.4mm   See a problem with this specification? Let us know.

Read more less

Material Stainless Steel (A2) Finish Natural Manufacturing Standard DIN 125 - Form A For Use With Thread Size M8 (8mm) Internal Diameter (ID) 8.4mm External Diameter (OD) 16mm External Diameter (OD) Tolerance +0/-0.43mm Thickness (T) 1.8mm Thickness (T) Tolerance +0/-0.4mm   See a problem with this specification? Let us know.

Read more less